fuel pump install - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

crazycuban · 01-21-2002, 12:26 PM

i'm putting in my walbro fuel pump for my s14 sr->s14 swap, and in the fsm it says you need a fuel pump lock ring socket.  i tried the dealership and several parts stores, and no one can get it.  anybody have another way to take it off?  i havent actually tried yet, so is it just a pull as hard as u can deal?  that wouldnt really make sense tho...

yenpit · 01-21-2002, 12:53 PM

most in-tank pumps have a lock ring & rubber seal holding the assembly in place. the lock ring can be turned open/off by CAREFULLY tapping the ears so the lock ring rotates around until the notches line up. then it all just pulls out of tank. i'm guessing thats what u mean....?

chickenmanq · 01-21-2002, 01:17 PM

If I'm thinking right, that's the part on top of the tank with bolts on it?  It was really simple in my truck, although I didn't remove the pump, just changed the sensor.  Anyway, blew up the master picture for you.  Don't know if it will help.

<img src=http://dana.ucc.nau.edu/~mka/fuel4close.jpg>

chickenmanq · 01-21-2002, 01:19 PM

The circle that comes off the top of the tank is bolted down by 12 bolts or so.

01-21-2002, 01:24 PM

That socket would be the correct way, but Yenpit is correct, you can just spin it by tapping it around untill it can come out, just be careful.

crazycuban · 01-21-2002, 02:20 PM

yeah, the lock ring is what i'm talkin about...thanks, i'll try that...

crazycuban · 01-21-2002, 07:05 PM

worked, the new fuel tank is in, thanks every1

crazycuban · 01-21-2002, 07:08 PM

errrrr fuel pump

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-21-2002, 12:26 PM	#1
crazycuban Zilvia Junkie Join Date: Nov 2001 Posts: 526 Trader Rating: (0) Feedback Score: 0 reviews	i'm putting in my walbro fuel pump for my s14 sr->s14 swap, and in the fsm it says you need a fuel pump lock ring socket.  i tried the dealership and several parts stores, and no one can get it.  anybody have another way to take it off?  i havent actually tried yet, so is it just a pull as hard as u can deal?  that wouldnt really make sense tho...

01-21-2002, 12:53 PM	#2
yenpit Zilvia Addict Join Date: Sep 2001 Location: Holland Michigan Posts: 798 Trader Rating: (0) Feedback Score: 0 reviews	most in-tank pumps have a lock ring & rubber seal holding the assembly in place. the lock ring can be turned open/off by CAREFULLY tapping the ears so the lock ring rotates around until the notches line up. then it all just pulls out of tank. i'm guessing thats what u mean....?

01-21-2002, 01:17 PM	#3
chickenmanq Zilvia FREAK! Join Date: Nov 2001 Posts: 1,000 Trader Rating: (0) Feedback Score: 0 reviews	If I'm thinking right, that's the part on top of the tank with bolts on it?  It was really simple in my truck, although I didn't remove the pump, just changed the sensor.  Anyway, blew up the master picture for you.  Don't know if it will help. <img src=http://dana.ucc.nau.edu/~mka/fuel4close.jpg>

01-21-2002, 01:19 PM	#4
chickenmanq Zilvia FREAK! Join Date: Nov 2001 Posts: 1,000 Trader Rating: (0) Feedback Score: 0 reviews	The circle that comes off the top of the tank is bolted down by 12 bolts or so.

01-21-2002, 01:24 PM	#5
Guest Posts: n/a	That socket would be the correct way, but Yenpit is correct, you can just spin it by tapping it around untill it can come out, just be careful.

01-21-2002, 02:20 PM	#6
crazycuban Zilvia Junkie Join Date: Nov 2001 Posts: 526 Trader Rating: (0) Feedback Score: 0 reviews	yeah, the lock ring is what i'm talkin about...thanks, i'll try that...

01-21-2002, 07:05 PM	#7
crazycuban Zilvia Junkie Join Date: Nov 2001 Posts: 526 Trader Rating: (0) Feedback Score: 0 reviews	worked, the new fuel tank is in, thanks every1

01-21-2002, 07:08 PM	#8
crazycuban Zilvia Junkie Join Date: Nov 2001 Posts: 526 Trader Rating: (0) Feedback Score: 0 reviews	errrrr fuel pump