seanmac777

Alright, I know this question has been ran into the ground 100's of times... and everybody is asking the same thing...what pumps work with what. Trust me, I've done like 100 searches throughout the internet and I hate making new posts about old topics..

But...I'm still having trouble figuring out why mine isn't going together..and I need help.

I have an S13 Sr20det. It's going into an S14 Chassis. (KA24 DOHC)
I have the power steering pump and bracket off of both cars.

I took the sr20 power steering bracket and the ka24 power steering pump and tried to put them together...but they don't fit. The Sr's bracket is too narrow for the pump to fit inside of it...

Now where I think I'm getting mixed up however, is I think my SR20 power steering pump is 4 wheel steer, because it has two pressure lines.


So my question is.. Is the 4 wheel steer bracket different than the 2wheel steer bracket on the Sr? and if so...all I need to do is get a 2 wheel steer bracket and it will all bolt up to the motor and ka pump?

97nismo

i have a sr20 redtop in my s14 and all i used was the stock s14 ps lines and bolted it up to the s13 sr motor ps pump not sure why its that complicated....you might have a hicas line or something

__________________
Feedback:
http://zilvia.net/f/itrader.php?u=78978

seanmac777

Yea, that's what it seems should work, problem is... My s14 ka pump doesn't bolt to my s13 sr bracket. They just don't fit together...