FL FS: S14 drivetrain, intercooler and other random parts... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jr_ss · 02-07-2009, 07:48 PM

I have some things still available from my drivetrain. I blew the trans so I'm upgrading, take advantage of it.

I am open to reasonable offers and possibly some trades if you have something I may need. Prices include paypal/shipping fees...

S14 SR non-ABS 1-piece DSS steel driveshaft... Will have a fresh coat of black paint to inhibit rust. $265

I also have an DOHC S13 starter, works great, bench tested it. $40

DOHC S13 alternator. Unknown condition, I imagine it works, came some same car as the starter. $35

DOHC S13 injectors with fuel rail and FPR. $55

S13 D/S power window switches. $18

Z32 BBK upgrade brackets. These allow you to run the 350z track

rotors with 300zx calipers on the 300zx, includes some hardware... $75

S13 clutch fan, dirty but works. $20

S13 hatch brake light, works good. $13

S14 FMIC setup. I pulled this from my car because I bought an HKS type-S. Worked great for me, I had no issues with it and I'm pushing around 250whp, I would imagine this is good up to 350-400hp(crank not wheel). The piping kit is for the S14, the I/C I picked up from ebay. The core is Bar and Plate and measures 2.5x7.25x21.5. I mounted the IC to the back of the factory rebar, the core butts up right against it underneath. I mounted it this way so I had frontal protection incase of a frontend collision. It fits great, and allows the use of SE fogs only thing I had to cut was the plastic undertray in the front. I'll include all hose clamps and couplers. Has an HKS SSQV flange welded on, but the BOV will not come with it. This isn't going to be a small box. $335

Stock S14 spoiler... Offer...

Altima

dual fans, has enough wiring on the pigtail for what you'll need... S14 guys, one fan will plug directly into the pigtail by the triple pressure sensor. $85

Things I'm willing to trade or partially trade(cash on my end) for:

740cc's
ATI damper pulley for SR
Sard Thermostat
Oil cooler setup
Greddy or equivalent oil pan

PM me for pictures, lost digi a week ago so I'll have to either text them to you or find a means...

Thanks in advance,

Glenn

jr_ss · 02-10-2009, 07:05 PM

Bump numero uno...

sliksta1 · 02-10-2009, 11:11 PM

is the clutch fan for the sr?

jr_ss · 02-14-2009, 06:00 PM

Nah, clutch fan is for the KA sorry I didn't specify.

02-07-2009, 07:48 PM	#1
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,054 Trader Rating: (34) Feedback Score: 34 reviews	FS: S14 drivetrain, intercooler and other random parts... I have some things still available from my drivetrain. I blew the trans so I'm upgrading, take advantage of it. I am open to reasonable offers and possibly some trades if you have something I may need. Prices include paypal/shipping fees... S14 SR non-ABS 1-piece DSS steel driveshaft... Will have a fresh coat of black paint to inhibit rust. $265 I also have an DOHC S13 starter, works great, bench tested it. $40 DOHC S13 alternator. Unknown condition, I imagine it works, came some same car as the starter. $35 DOHC S13 injectors with fuel rail and FPR. $55 S13 D/S power window switches. $18 Z32 BBK upgrade brackets. These allow you to run the 350z track rotors with 300zx calipers on the 300zx, includes some hardware... $75 S13 clutch fan, dirty but works. $20 S13 hatch brake light, works good. $13 S14 FMIC setup. I pulled this from my car because I bought an HKS type-S. Worked great for me, I had no issues with it and I'm pushing around 250whp, I would imagine this is good up to 350-400hp(crank not wheel). The piping kit is for the S14, the I/C I picked up from ebay. The core is Bar and Plate and measures 2.5x7.25x21.5. I mounted the IC to the back of the factory rebar, the core butts up right against it underneath. I mounted it this way so I had frontal protection incase of a frontend collision. It fits great, and allows the use of SE fogs only thing I had to cut was the plastic undertray in the front. I'll include all hose clamps and couplers. Has an HKS SSQV flange welded on, but the BOV will not come with it. This isn't going to be a small box. $335 Stock S14 spoiler... Offer... Altima dual fans, has enough wiring on the pigtail for what you'll need... S14 guys, one fan will plug directly into the pigtail by the triple pressure sensor. $85 Things I'm willing to trade or partially trade(cash on my end) for: 740cc's ATI damper pulley for SR Sard Thermostat Oil cooler setup Greddy or equivalent oil pan PM me for pictures, lost digi a week ago so I'll have to either text them to you or find a means... Thanks in advance, Glenn __________________ My SR20VET Last edited by jr_ss; 02-10-2009 at 07:05 PM..

02-10-2009, 07:05 PM	#2
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,054 Trader Rating: (34) Feedback Score: 34 reviews	Bump numero uno... __________________ My SR20VET

02-10-2009, 11:11 PM	#3
sliksta1 Zilvia Member Join Date: Jun 2007 Location: NM Age: 38 Posts: 229 Trader Rating: (6) Feedback Score: 6 reviews	is the clutch fan for the sr? __________________

02-14-2009, 06:00 PM	#4
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,054 Trader Rating: (34) Feedback Score: 34 reviews	Nah, clutch fan is for the KA sorry I didn't specify. __________________ My SR20VET

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode