Saggy Door!?!?!? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Ineedparts · 07-30-2008, 08:12 PM

So my drivers side door has always had a slight sag, does not close nice and easy like the passenger door. I have to slam it pretty hard and it bugs the living shit outta me! Does anyone know the remedy for this? I was thinking maybe washers on the door pins?? Any suggestions would be greatly appreciated. Thank you

slidewaysmn · 07-30-2008, 10:05 PM

Take a floor jack with a 2x4 on it and jack it up on the inner door structure, not lip. and bend the hinges...do it all the time at work.

let5l1de · 07-31-2008, 12:33 AM

Quote:

Originally Posted by slidewaysmn

Take a floor jack with a 2x4 on it and jack it up on the inner door structure, not lip. and bend the hinges...do it all the time at work.

that like taking the Bigger Hammer approach.

try pulling the pins and bushings from a good used donor. no matter which way you choose to go, research as to why this happened. is it really the pins that are worn? Or is it the 200 + friend you always taxi leaning on a open door... gl

projectRDM · 07-31-2008, 08:24 AM

Best bet is to loosen the bolts on the hinges, then jack the door up. Retighten after the door is lifted a bit. Typically the hinges have some give but by remounting them to the chassis you take out a lot of the sag.

g6civcx · 07-31-2008, 12:00 PM

Adjust your door hinge and striker.

It's more art than science though so you may have to pay someone to get perfect alignment if you don't want to spend the time.

Ineedparts · 07-31-2008, 05:54 PM

The play is deff. coming from the pins, I am going to switch the pins from my parts car and see if that fixes it. Thanks for the input

07-30-2008, 08:12 PM	#1
Ineedparts Zilvia Junkie Join Date: Jan 2008 Location: Wichita Ks Age: 34 Posts: 449 Trader Rating: (8) Feedback Score: 8 reviews	Saggy Door!?!?!? So my drivers side door has always had a slight sag, does not close nice and easy like the passenger door. I have to slam it pretty hard and it bugs the living shit outta me! Does anyone know the remedy for this? I was thinking maybe washers on the door pins?? Any suggestions would be greatly appreciated. Thank you

07-30-2008, 10:05 PM	#2
slidewaysmn Leaky Injector Join Date: Jan 2007 Location: Brainerd, MN Age: 31 Posts: 136 Trader Rating: (0) Feedback Score: 0 reviews	Take a floor jack with a 2x4 on it and jack it up on the inner door structure, not lip. and bend the hinges...do it all the time at work. __________________ '95 Zenki '85 Cressida

07-31-2008, 08:24 AM	#4
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 47 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Best bet is to loosen the bolts on the hinges, then jack the door up. Retighten after the door is lifted a bit. Typically the hinges have some give but by remounting them to the chassis you take out a lot of the sag. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-31-2008, 12:00 PM	#5
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5) Feedback Score: 5 reviews	Adjust your door hinge and striker. It's more art than science though so you may have to pay someone to get perfect alignment if you don't want to spend the time.

07-31-2008, 05:54 PM	#6
Ineedparts Zilvia Junkie Join Date: Jan 2008 Location: Wichita Ks Age: 34 Posts: 449 Trader Rating: (8) Feedback Score: 8 reviews	The play is deff. coming from the pins, I am going to switch the pins from my parts car and see if that fixes it. Thanks for the input