FL KA part ecu turbo ac setup z32 MAF - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Pimpnyou204 · 10-18-2016, 01:58 PM

Have a few KA24DE pieces for sale. Everything is best offer but in no rush to sell. Located in south florida

350- KA block I was going to use, had it bored and honed to .20 pistons. All machine work done by TotalEngine Concepts in Riviera Beach. Completely ready to go just needs pistons and hardware. I have the crank for it (2 actually) I will include (1). And that aswell was done at TEC.

85- Stock KA crank machined and checked by TEC

85- Stock S13 Camshafts, from my understanding these were purchased new from Nissan and installed for 1000 miles. Pulled working and checked at TEC.

SOLD- ISR RS3871 Turbo purchased from enjuku was used for maybe 1000 miles if that. Zero shaft play at all.

SOLD- ISR bottom mount turbo manifold used with the turbo from above

150- RS Enthalpy tune for 750 injectors and z32 MAF, from my understanding if you return one of his units you can retune for ($100?)

85- Z32 MAF with cone. Used but pulled from same running car.

80- Front bumper picked up to avoid being harassed. Painted BMW Crimson Red. Was pretty beat up when I got it, filled most of it including Nissan logo and groves in it. Been sitting outside not the best bumper but it is one color and I am including the matching turning lights bulbs and harness. Also tried to take off the front mount support but it was rusted so a piece broke off.

20- Stock KA flywheel no clue how long its been used but looks fine

55- KA A/C system lines and compressor. One line I believe has a small hole in it the compressor for some reason when kicked on will spin the connecting wires. Im sure its something silly.

25- KA tranny crossmember

Mudweiser · 10-19-2016, 06:19 AM

How much for the isr turbo and manifold shipped to 28273?

Pimpnyou204 · 10-19-2016, 09:54 AM

Turbo and manifold sold

Pimpnyou204 · 12-07-2016, 06:28 PM

Have a few KA24DE pieces for sale all is OBO. Located in south florida
275- KA block I was going to use, had it bored and honed to .20 pistons. All machine work done by Total Engine Concepts in Riviera Beach. Completely ready to go just needs pistons and hardware. I have the crank for it, I will include. And that aswell was done at TEC.
65- Stock KA crank machined and checked by TEC
65- Stock S13 Camshafts, from my understanding these were purchased new from Nissan and installed for 1000 miles. Pulled working and checked at TEC.
65- Z32 MAF with cone. Used but pulled from same running car.
45- Front bumper picked up to avoid being harassed. Painted BMW Crimson Red. Was pretty beat up when I got it, filled most of it including Nissan logo and groves in it. Been sitting outside not the best bumper but it is one color and I am including the matching turning lights/bulbs and harness.
20- Stock KA flywheel no clue how long its been used but looks fine
50- KA A/C system lines and compressor. One line I believe has a small hole in it the compressor for some reason when kicked on will spin the connecting wires. Im sure its something silly.
20- KA tranny crossmember

10-18-2016, 01:58 PM	#1
Pimpnyou204 Leaky Injector Join Date: Oct 2014 Location: Tamarac Age: 32 Posts: 60 Trader Rating: (2) Feedback Score: 2 reviews	KA part ecu turbo ac setup z32 MAF Have a few KA24DE pieces for sale. Everything is best offer but in no rush to sell. Located in south florida 350- KA block I was going to use, had it bored and honed to .20 pistons. All machine work done by TotalEngine Concepts in Riviera Beach. Completely ready to go just needs pistons and hardware. I have the crank for it (2 actually) I will include (1). And that aswell was done at TEC. 85- Stock KA crank machined and checked by TEC 85- Stock S13 Camshafts, from my understanding these were purchased new from Nissan and installed for 1000 miles. Pulled working and checked at TEC. SOLD- ISR RS3871 Turbo purchased from enjuku was used for maybe 1000 miles if that. Zero shaft play at all. SOLD- ISR bottom mount turbo manifold used with the turbo from above 150- RS Enthalpy tune for 750 injectors and z32 MAF, from my understanding if you return one of his units you can retune for ($100?) 85- Z32 MAF with cone. Used but pulled from same running car. 80- Front bumper picked up to avoid being harassed. Painted BMW Crimson Red. Was pretty beat up when I got it, filled most of it including Nissan logo and groves in it. Been sitting outside not the best bumper but it is one color and I am including the matching turning lights bulbs and harness. Also tried to take off the front mount support but it was rusted so a piece broke off. 20- Stock KA flywheel no clue how long its been used but looks fine 55- KA A/C system lines and compressor. One line I believe has a small hole in it the compressor for some reason when kicked on will spin the connecting wires. Im sure its something silly. 25- KA tranny crossmember Last edited by Pimpnyou204; 10-19-2016 at 09:53 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-19-2016, 06:19 AM	#2
Mudweiser Join Date: Jul 2014 Location: Charlotte Age: 39 Posts: 47 Trader Rating: (3) Feedback Score: 3 reviews	How much for the isr turbo and manifold shipped to 28273?

10-19-2016, 09:54 AM	#3
Pimpnyou204 Leaky Injector Join Date: Oct 2014 Location: Tamarac Age: 32 Posts: 60 Trader Rating: (2) Feedback Score: 2 reviews	Turbo and manifold sold

12-07-2016, 06:28 PM	#4
Pimpnyou204 Leaky Injector Join Date: Oct 2014 Location: Tamarac Age: 32 Posts: 60 Trader Rating: (2) Feedback Score: 2 reviews	Have a few KA24DE pieces for sale all is OBO. Located in south florida 275- KA block I was going to use, had it bored and honed to .20 pistons. All machine work done by Total Engine Concepts in Riviera Beach. Completely ready to go just needs pistons and hardware. I have the crank for it, I will include. And that aswell was done at TEC. 65- Stock KA crank machined and checked by TEC 65- Stock S13 Camshafts, from my understanding these were purchased new from Nissan and installed for 1000 miles. Pulled working and checked at TEC. 65- Z32 MAF with cone. Used but pulled from same running car. 45- Front bumper picked up to avoid being harassed. Painted BMW Crimson Red. Was pretty beat up when I got it, filled most of it including Nissan logo and groves in it. Been sitting outside not the best bumper but it is one color and I am including the matching turning lights/bulbs and harness. 20- Stock KA flywheel no clue how long its been used but looks fine 50- KA A/C system lines and compressor. One line I believe has a small hole in it the compressor for some reason when kicked on will spin the connecting wires. Im sure its something silly. 20- KA tranny crossmember