ID Check: Output Flange - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

slyblaznbboi · 01-26-2018, 11:01 AM

All,

I'm having trouble finding the correct c-clip for my output shaft and it continues to pop out of my 2-way diff. The previous owner clearly modded this flange, but any help in the right direction would be greatly appreciated.

https://tinyurl.com/ycnd5sw6

*anti tyler* · 01-26-2018, 03:34 PM

Quote:

Originally Posted by slyblaznbboi

All,

I'm having trouble finding the correct c-clip for my output shaft and it continues to pop out of my 2-way diff. The previous owner clearly modded this flange, but any help in the right direction would be greatly appreciated.

https://tinyurl.com/ycnd5sw6

Chances are it was cut because he had problems with it himself

My question is, how is it sliding out far enough for it to not catch? Are you running the right length axles ?

Atill93 · 02-01-2018, 09:40 AM

is the output shaft supposed to have a c-clip inside the pumpkin?

*TheRealSy90* · 02-01-2018, 09:51 AM

Quote:

Originally Posted by slyblaznbboi

All,

I'm having trouble finding the correct c-clip for my output shaft and it continues to pop out of my 2-way diff. The previous owner clearly modded this flange, but any help in the right direction would be greatly appreciated.

https://tinyurl.com/ycnd5sw6

It looks to me like you're trying to use a VLSD output shaft. Almost every 2-way on the market for our cars uses the open differential output shafts. Obviously the previous owner tried to make it fit but they aren't correct.

Quote:

Originally Posted by Atill93

is the output shaft supposed to have a c-clip inside the pumpkin?

All stub shafts have a circlip at the inboard end of the splines to hold the stub shaft into the differential.

Atill93 · 02-01-2018, 04:17 PM

Quote:

Originally Posted by TheRealSy90

All stub shafts have a circlip at the inboard end of the splines to hold the stub shaft into the differential.

wow thanks, I didn't realize that. the previous owner of my coupe must have not put the clips back in when he modified my diff. my output shafts slide right out after I unbolt the axle lol and that maybe explains the leak coming out of my diff

01-26-2018, 11:01 AM	#1
slyblaznbboi Join Date: Aug 2009 Location: San Antonio, Tx Age: 31 Posts: 19 Trader Rating: (0) Feedback Score: 0 reviews	ID Check: Output Flange All, I'm having trouble finding the correct c-clip for my output shaft and it continues to pop out of my 2-way diff. The previous owner clearly modded this flange, but any help in the right direction would be greatly appreciated. https://tinyurl.com/ycnd5sw6

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-01-2018, 09:40 AM	#3
Atill93 Leaky Injector Join Date: Jul 2012 Location: Alabama Age: 28 Posts: 144 Trader Rating: (0) Feedback Score: 0 reviews	is the output shaft supposed to have a c-clip inside the pumpkin?