shomo172

Today I received some manual seat belts that I swapped into my S13.
It wasn't too difficult for me because I had already taken all my panels off, and the auto seatbelts were removed before I bought the car.

Anyways, my question is about the b-pillar panels. I broke one of mine trying to play with it to see if I could make it work. Say I was to buy JDM or CDM b-pillar panels, would they line up right with the USDM A-pillar and/or rear seat panels? Are the rear seat panels the same? Any Canadians have some pictures of their interior?
Anyone know where I can buy them? Any information would be awesome. Thanks. I really don't wanna cut my panels.

gunmetalr32

yes everything lines up. the whole conversion belts, panels, oh shit handle, headliner.ect will cost about $250

__________________
NEED S14 KOUKI VALANCES, S14 NAVAN SIDE SKIRTS, S14 KOUKI OEM JDM LIP HIT ME UP!!

shomo172

Is it possible to get away with only the b-pillar panels that the top of the seat belt bolts too? I already have belts in there now. I'm just wondering if the panels line up. I can't find anywhere selling these items.

gunmetalr32

people don't want to part out.. good luck finding them.. i have a complete set im willing to sell but im not parting out

__________________
NEED S14 KOUKI VALANCES, S14 NAVAN SIDE SKIRTS, S14 KOUKI OEM JDM LIP HIT ME UP!!

ghoti

Just get and USDM OEM B-Pillar. Get a longer bolt and washers to strengthen it.
Make a small hole in the B-pillar and it'll look like the manual belts are meant to be there.

There's a thread out here on NICO talking about this, look for it if not I'll take pics of mine later so you can see what I mean.

__________________

shomo172

Yeah I was thinking maybe I can do that. The gap doesn't bother me underneath where the autos used to be, as long as the panels are there. I broke my panels but it will be easier to find USDM ones anyway.

Could you show me a picture? Like with the bolt and stuff, if possible? I couldn't find the pics on Nico. The only pics were from a guy who was rocking it with no panels. Thanks in advance.

WERDdabuilder

here you go you lazy bum...

How To: S13---> B14 manual seat belt swap - SR20 Forum

__________________

tapdeznutz

i did this too. went to home depot got a longer bolt and some thick plastic spacers and thin ones. worked like a charm.

__________________
FS: DSS 1pc Steel Non ABS, 6bolt axles
WTB: Boost Gauge, Hatch Roof Wing

shomo172

Haha thanks. I swear I looked at every write up except this one. This is the only one that included the panels and whatnot, like how I asked. Appreciate it!

s13love-green

Any One knows what other seatbelts from other Nissans it s13????

__________________
....that what she said

240boi115

tried to pm you bro im interested but your inbox is full. hmu!


didnt mean to thread jack guys

__________________
my 240 broke down..again

ghoti

Seatbelts that are known to fit: Canadian/JDM S13, S14, Sentra

I have herd of people using rear S14 seat belts, but that's ghetto.

__________________

Mikester

I did all JDM/CDM paneling. For the A-pillar, you want CDM b/c there is no 'shit' handle on them. WIth JDM panels, that handle will be on the driver's side (annoying as fuck).

No. The USDM A-pillar is significantly wider due to autobelts and will not mate up properly with the JDM/CDM B-pillar panels without looking like crap.

I did all my paneling with JDM/CDM panels:

JDM B-pillar, CDM A-pillar:





Plus I had my headliner re-done- you will need to do it as stated up above. Total cost was significantly more than $250 for me all said/done... But I bought all my panels new & had the headliner done by a shop...

I don't remember which Nissan dealer in Canada I bought mine from. Pretty much any of them there will be able to get you the panels you need. Also, you will need to order the B-pillar inserts for the seat belts- they do not come with the new panels.

Everything lines up perfectly.

__________________