550cc injectors - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Just8aV8 · 01-02-2003, 05:33 PM

i was planning on ordering either tomei or apexi 550 cc injectors, a local shop "highly suggested" a power fc, but i dont have the cash to drop on a pfc, can i use my safc to tune these injectors?

*HaLo* · 01-02-2003, 07:10 PM

Yes, you can.

BTW, how come your S15 turbo runs 9 psi? The internal wastegate is set at 11psi... I'm running 11psi on "stock" boost setting with the S15 Turbo on a blacktop SR20DET.

Just8aV8 · 01-02-2003, 11:34 PM

thanks for the response, i'm only running 9psi because when i got it tuned the stock injectors couldnt hold more then that

*HaLo* · 01-03-2003, 10:31 AM

I can't go lower than 11psi with my S15 Turbo because the internal wastegate is set at that amount... Did you change the wastegate?

Foxcolt · 01-03-2003, 10:34 AM

Quote:

Originally posted by HaLo
I can't go lower than 11psi with my S15 Turbo because the internal wastegate is set at that amount... Did you change the wastegate?

Stock setting for s15 is 9psi I believe. Check to see if you actuator arm is threaded. If so, the person that had the turbo before you might have set it differently.

Just8aV8 · 01-03-2003, 11:32 AM

i'm ordering a hks actuator with my injectors so i'm not sure what the setting is on the stock internal

*HaLo* · 01-03-2003, 01:03 PM

Quote:

Originally posted by Foxcolt
Stock setting for s15 is 9psi I believe. Check to see if you actuator arm is threaded. If so, the person that had the turbo before you might have set it differently.

Thanks! I'll look at it... however, I was frequently told that the stock S15 boost was 11 psi, while S14 was about 9 psi...

You might be right... Anyways, I'll do some lookin' up.

(I do know though that my car's stock boost setting is 0.78 bar... On a S15 turbo)

01-02-2003, 05:33 PM	#1
Just8aV8 Leaky Injector Join Date: Apr 2002 Location: Utah Age: 39 Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	550cc injectors i was planning on ordering either tomei or apexi 550 cc injectors, a local shop "highly suggested" a power fc, but i dont have the cash to drop on a pfc, can i use my safc to tune these injectors?

01-02-2003, 07:10 PM	#2
HaLo from Canada, eh! Join Date: Sep 2001 Location: Montreal, Quebec Age: 42 Posts: 5,199 Trader Rating: (0) Rides Gallery: HaLo Feedback Score: 0 reviews	Yes, you can. BTW, how come your S15 turbo runs 9 psi? The internal wastegate is set at 11psi... I'm running 11psi on "stock" boost setting with the S15 Turbo on a blacktop SR20DET. __________________ -> HaLo Race Car: '98 E36 BMW M3 Daily Driver: '08 Fiji Blue Honda Civic Si SOLD: 01 GPW Honda S2000 PARTED: 93 Pearl White 240SX LE Fastback w/SR20DET SOLD: 93 Super White 240SX SE Convertible w/Silvia Front

01-03-2003, 10:31 AM	#4
HaLo from Canada, eh! Join Date: Sep 2001 Location: Montreal, Quebec Age: 42 Posts: 5,199 Trader Rating: (0) Rides Gallery: HaLo Feedback Score: 0 reviews	I can't go lower than 11psi with my S15 Turbo because the internal wastegate is set at that amount... Did you change the wastegate? __________________ -> HaLo Race Car: '98 E36 BMW M3 Daily Driver: '08 Fiji Blue Honda Civic Si SOLD: 01 GPW Honda S2000 PARTED: 93 Pearl White 240SX LE Fastback w/SR20DET SOLD: 93 Super White 240SX SE Convertible w/Silvia Front

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-02-2003, 11:34 PM	#3
Just8aV8 Leaky Injector Join Date: Apr 2002 Location: Utah Age: 39 Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	thanks for the response, i'm only running 9psi because when i got it tuned the stock injectors couldnt hold more then that

01-03-2003, 11:32 AM	#6
Just8aV8 Leaky Injector Join Date: Apr 2002 Location: Utah Age: 39 Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	i'm ordering a hks actuator with my injectors so i'm not sure what the setting is on the stock internal