fl redemption build (typex s13) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

s14fbs · 06-06-2013, 02:11 PM

THIS IS A COPY PASTE BUILD THREAD FROM ANOTHER FORUM SO SOME OF IT MIGHT SEEM A LITTLE WEIRD

so i sold my blue car

and bought this

then spent a bunch of money on all this

---------- Post added at 11:55 PM ---------- Previous post was at 11:51 PM ----------

ended up in a pile

then stripped it back down sent it off to paint

meanwhile i rebuilt the ka that was in it since its gonna be in there a few months till i can get everything toghter for a s14 sr

and dyed the rear seats and side door inserts black

picked up a uncracked dash

---------- Post added 11-23-2012 at 12:02 AM ---------- Previous post was 11-22-2012 at 11:55 PM ----------

picked it up from paint

wheels finally showed up

installed the new carpet front and black and some of the interior stuff picked up some checkered floor mats

installed the motor

mounted the front brakes

mounted some tires

then got it sitting pretty

had to add some stickers

stil need to install engine harness and enging bay brake lines ect bunch little stupid shit

alarm and keyless entry needs to be wired
and the dash and the rest of the interior installed

s14fbs · 06-13-2013, 03:36 PM

[/COLOR]got some wood cut for the floor of the rear floor

couple randoms

i need to make a bracket to keep the bumper flat its warped hence why the rear valence is twisted

buddy gave me his old pbm skid plate

also rolled the car out in the road so i can measure ride height since my driveway makes the car sit weird and took a couple his res pics

sorry if im picture whoring

tomorrow im gonna be installing the rear z brake setup if i can get modivated

s14fbs · 06-13-2013, 03:39 PM

Well been crazy busy and broke for the holidays
But I was able to wire in the new radio and speakers
I kinda went super OCD and color coated heat shrink the wires
Example
Purple is rear right speaker green is rear left, 12v power switch & constant are red and so and so on

Love it sounds amazing full Bluetooth no wires needed

Random garage picture

I leave for work in the am so while I'm gone ill be ordering everything to get it done now that the holidays are over with

Also my clear type x lights came in

s14fbs · 06-13-2013, 03:39 PM

then i ended up trading the ka that was in the car for this
soo excited
got the 6 speed swap

nismo flywheel that i need to find some info on im guessing there rare since i cant find a thing on them

also picked up
a optima stainless battery tray & SR RAD

Buddy brought me back this from j land for the front bumper

also got some mounts for all the cables brake lines ect

another project i started is steering column gauge pod i had one u buy in the s14 and did not like it with the placement of the gauges no way to adjust the angle ect so i decided to make my own i trimmed down a cup and glued it to the panel to hold and im going to resin the whole thing once the other side is mounted and then re texture the panel when done

s14fbs · 06-13-2013, 03:40 PM

finally got time from work and life to get the motor for the car pulled out the other car and on the stand to get torn down cleaned coated and made all pretty and fresh gasket ect

finally

motor came with a bunch of sweet goodies

moonpie oval downpipe my faviorite
circuit sports turbo lines
tomei style oil pan
exedy stage 3 clutch
tubular manifold
b&m shifter on the 5mt even though it wont be getting used
greddy i/c pipe - for sale
and old skool hks bov when they werent anooying -also for sale

gonna be ordering tomei arms turbo kit and proncams and some other odds and ends in a couple weeks

s14fbs · 06-13-2013, 03:41 PM

shaved and polished

s14fbs · 06-13-2013, 03:43 PM

fuel rail and intake are done

cams get delievered tomorrow era-1 70mm throttle body next week and ill be sending the turbo manifold off to get chrome ceramic coated and tomei arms kit installed in a couple weeks after vacation to the tail of the dragon

---------- Post added 04-12-2013 at 05:17 PM ---------- Previous post was 04-11-2013 at 11:48 PM ----------

came home from vacation to this sick throttle body

super awesome product

and one from vacation

s14fbs · 06-13-2013, 03:44 PM

throttle body installed and its so fucking rad port matched the intake it as much as i could

and u cant really tell but cleaned out the oil runners and installed the cams

and everything got dropped off to the coaters yesterday before i leave for colorado in the am and once i get back i should have a arms kit ready to be installed

couple updates on the build

picked up the ceramic coated turbo manifold looks super rad still looks dull since i have not buffed the coating yet

gotta a whole bunch of packages coming

first one showed up from enjuku brett always puts something funny in the box

isis ps line and rad hoses

and got a rb20 fan im going to run instead of spending money on a gktech one

TOMEI TURBO IS ON ITS WAY !!!!!!

s14fbs · 06-13-2013, 03:45 PM

major updates

got this cool thing

what is this u may ask

that is all
AND NOW ITS PRESENT TIME

not really

boom so excited

Sansone · 06-13-2013, 05:55 PM

Looking good! Very clean

tricky_ab · 06-13-2013, 06:57 PM

It's nice to see more people using the Tomei ARMS turbo. I can't wait to hear what you think of it. It's on my short list of choices of turbo's that I'm interested in.

Konster · 06-13-2013, 10:00 PM

Looks really good. What did you dye the seats with and do they feel crunchy?

s14fbs · 06-13-2013, 10:10 PM

Quote:

Originally Posted by tricky_ab

It's nice to see more people using the Tomei ARMS turbo. I can't wait to hear what you think of it. It's on my short list of choices of turbo's that I'm interested in.

yeah im very excited to run this turbo i really liked the specs and what very few reviews i could find on it

Quote:

Originally Posted by Konster

Looks really good. What did you dye the seats with and do they feel crunchy?

just the black fabric paint in a spray can at first its crunky but now that its been worn in kinda there no worse then the factory fabric there temporary anyways until i get 180 rear seats

KoukiMonsta · 06-14-2013, 07:39 AM

Rad car is rad

Konster · 06-14-2013, 08:28 AM

Quote:

Originally Posted by s14fbs

yeah im very excited to run this turbo i really liked the specs and what very few reviews i could find on it

just the black fabric paint in a spray can at first its crunky but now that its been worn in kinda there no worse then the factory fabric there temporary anyways until i get 180 rear seats

Cool thanks, I'm planning on doing the exact same thing.

energy0uth · 06-14-2013, 09:34 AM

Looking through the corner, nicely done.

Sick car too. I need aero damnit.

Bmxer300zx · 06-14-2013, 10:14 AM

Nice build man looks really clean so far.
That nismo clutch is a good score my buddy got that and a nismo clutch with his s13 blacktop he got from jdmenginedepot. I made him buy one of the dirty ones that they hadn't pressure washed and pillaged yet turned out to have alota goodies on it lol

s14fbs · 06-14-2013, 02:36 PM

Quote:

Originally Posted by Bmxer300zx

Nice build man looks really clean so far.
That nismo clutch is a good score my buddy got that and a nismo clutch with his s13 blacktop he got from jdmenginedepot. I made him buy one of the dirty ones that they hadn't pressure washed and pillaged yet turned out to have alota goodies on it lol

I don't have a Nismo clutch? I have a lightweight nismo dual mass flywheel since I'm running a s15 sr 6mt setup as pictured

Bmxer300zx · 06-14-2013, 02:51 PM

Quote:

Originally Posted by s14fbs

I don't have a Nismo clutch? I have a lightweight nismo dual mass flywheel since I'm running a s15 sr 6mt setup as pictured

Shit i meant flywheel lol my buddy got a nismo flywheel/clutch combo on his s13 blacktop know they're different different style between the s13 and s15 flywheel but he looked as well and couldn't find much info on his.

s14fbs · 06-25-2013, 10:18 PM

got the turbo kit installed

went under the knife

and we have touchdown

made another 1000$ order today at enjuku
now back to work so i can make another paycheck and make another hefty order

KendallH · 06-25-2013, 10:24 PM

Love your motor! I'm doing the same with mine; polished/shaved VC, polished intake, clutch fan, etc. Would love to see this car in person some day.

s14fbs · 07-02-2013, 10:53 AM

pretty much waiting on parts to arrive

some of my tomei order arrived

still waiting on
tomei type s frp
tomei fuel rail adapter
tomei oil cap
fmic kit
cody ace a/c bracket
summit order with all my -an line and fittings
xrp fuel filter
aeromotive fuel pump
tial bov
drift armor front bash bar

seems like the last bits are taking forever

coupesallday! · 07-02-2013, 11:19 AM

Subbeddddddddd

Prok0 · 07-02-2013, 11:22 AM

Come bring that thang out to Gainesville if me and Clay throw a track day together.

s14fbs · 07-02-2013, 12:56 PM

Quote:

Originally Posted by Prok0

Come bring that thang out to Gainesville if me and Clay throw a track day together.

im so down

Bumpkin203 · 07-02-2013, 03:03 PM

Really nice build man, I also have one of the Nismo flywheels, it came on my swap so idk anything about it or how rare it is.

Mustache240 · 07-02-2013, 03:56 PM

wow good shit! keep it up!

bc. · 07-02-2013, 07:01 PM

Awesomesauce!!!!

What fan shroud is that?

s14fbs · 07-04-2013, 10:42 AM

50% of the -an stuff showed up yesterday

Still have to order all the 10 -an stuff for the catch can and p/s ect

Just waiting to get the catch can soo can see exactly what I need

WristWork · 07-05-2013, 03:00 AM

Keep going! Quality build right here, please never change those rims

06-06-2013, 02:11 PM	#1
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 31 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	fl redemption build (typex s13) THIS IS A COPY PASTE BUILD THREAD FROM ANOTHER FORUM SO SOME OF IT MIGHT SEEM A LITTLE WEIRD so i sold my blue car and bought this then spent a bunch of money on all this ---------- Post added at 11:55 PM ---------- Previous post was at 11:51 PM ---------- ended up in a pile then stripped it back down sent it off to paint meanwhile i rebuilt the ka that was in it since its gonna be in there a few months till i can get everything toghter for a s14 sr and dyed the rear seats and side door inserts black picked up a uncracked dash ---------- Post added 11-23-2012 at 12:02 AM ---------- Previous post was 11-22-2012 at 11:55 PM ---------- picked it up from paint wheels finally showed up installed the new carpet front and black and some of the interior stuff picked up some checkered floor mats installed the motor mounted the front brakes mounted some tires then got it sitting pretty had to add some stickers stil need to install engine harness and enging bay brake lines ect bunch little stupid shit alarm and keyless entry needs to be wired and the dash and the rest of the interior installed __________________ http://strictlycoolstuff.tumblr.com/ Last edited by s14fbs; 06-13-2013 at 03:46 PM..

06-13-2013, 03:36 PM	#2
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 31 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	[/COLOR]got some wood cut for the floor of the rear floor couple randoms i need to make a bracket to keep the bumper flat its warped hence why the rear valence is twisted buddy gave me his old pbm skid plate also rolled the car out in the road so i can measure ride height since my driveway makes the car sit weird and took a couple his res pics sorry if im picture whoring tomorrow im gonna be installing the rear z brake setup if i can get modivated __________________ http://strictlycoolstuff.tumblr.com/

06-13-2013, 03:39 PM	#3
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 31 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	Well been crazy busy and broke for the holidays But I was able to wire in the new radio and speakers I kinda went super OCD and color coated heat shrink the wires Example Purple is rear right speaker green is rear left, 12v power switch & constant are red and so and so on Love it sounds amazing full Bluetooth no wires needed Random garage picture I leave for work in the am so while I'm gone ill be ordering everything to get it done now that the holidays are over with Also my clear type x lights came in __________________ http://strictlycoolstuff.tumblr.com/

06-13-2013, 03:39 PM	#4
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 31 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	then i ended up trading the ka that was in the car for this soo excited got the 6 speed swap nismo flywheel that i need to find some info on im guessing there rare since i cant find a thing on them also picked up a optima stainless battery tray & SR RAD Buddy brought me back this from j land for the front bumper also got some mounts for all the cables brake lines ect another project i started is steering column gauge pod i had one u buy in the s14 and did not like it with the placement of the gauges no way to adjust the angle ect so i decided to make my own i trimmed down a cup and glued it to the panel to hold and im going to resin the whole thing once the other side is mounted and then re texture the panel when done __________________ http://strictlycoolstuff.tumblr.com/

06-13-2013, 03:40 PM	#5
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 31 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	finally got time from work and life to get the motor for the car pulled out the other car and on the stand to get torn down cleaned coated and made all pretty and fresh gasket ect finally motor came with a bunch of sweet goodies moonpie oval downpipe my faviorite circuit sports turbo lines tomei style oil pan exedy stage 3 clutch tubular manifold b&m shifter on the 5mt even though it wont be getting used greddy i/c pipe - for sale and old skool hks bov when they werent anooying -also for sale gonna be ordering tomei arms turbo kit and proncams and some other odds and ends in a couple weeks __________________ http://strictlycoolstuff.tumblr.com/

06-13-2013, 03:41 PM	#6
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 31 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	shaved and polished __________________ http://strictlycoolstuff.tumblr.com/

06-13-2013, 03:43 PM	#7
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 31 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	fuel rail and intake are done cams get delievered tomorrow era-1 70mm throttle body next week and ill be sending the turbo manifold off to get chrome ceramic coated and tomei arms kit installed in a couple weeks after vacation to the tail of the dragon ---------- Post added 04-12-2013 at 05:17 PM ---------- Previous post was 04-11-2013 at 11:48 PM ---------- came home from vacation to this sick throttle body super awesome product and one from vacation __________________ http://strictlycoolstuff.tumblr.com/

06-13-2013, 03:44 PM	#8
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 31 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	throttle body installed and its so fucking rad port matched the intake it as much as i could and u cant really tell but cleaned out the oil runners and installed the cams and everything got dropped off to the coaters yesterday before i leave for colorado in the am and once i get back i should have a arms kit ready to be installed couple updates on the build picked up the ceramic coated turbo manifold looks super rad still looks dull since i have not buffed the coating yet gotta a whole bunch of packages coming first one showed up from enjuku brett always puts something funny in the box isis ps line and rad hoses and got a rb20 fan im going to run instead of spending money on a gktech one TOMEI TURBO IS ON ITS WAY !!!!!! __________________ http://strictlycoolstuff.tumblr.com/

06-13-2013, 03:45 PM	#9
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 31 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	major updates got this cool thing what is this u may ask that is all AND NOW ITS PRESENT TIME not really boom so excited __________________ http://strictlycoolstuff.tumblr.com/

06-13-2013, 05:55 PM	#10
Sansone Leaky Injector Join Date: Aug 2010 Location: Buffalo, NY Age: 32 Posts: 145 Trader Rating: (2) Feedback Score: 2 reviews	Looking good! Very clean __________________ Life Ruiner

06-13-2013, 06:57 PM	#11
tricky_ab Post Whore! Join Date: Sep 2008 Location: It's dark, and hell is hot! Posts: 9,413 Trader Rating: (23) Feedback Score: 23 reviews	It's nice to see more people using the Tomei ARMS turbo. I can't wait to hear what you think of it. It's on my short list of choices of turbo's that I'm interested in.

06-13-2013, 10:00 PM	#12
Konster Zilvia FREAK! Join Date: Jul 2012 Location: NY Age: 32 Posts: 1,270 Trader Rating: (19) Feedback Score: 19 reviews	Looks really good. What did you dye the seats with and do they feel crunchy? __________________ Hyer.

06-14-2013, 07:39 AM	#14
KoukiMonsta Nissanaholic! Join Date: Mar 2009 Location: NC Posts: 1,969 Trader Rating: (23) Feedback Score: 23 reviews	Rad car is rad __________________ @UpshiftEngineering

06-14-2013, 09:34 AM	#16
energy0uth Zilvia Member Join Date: Nov 2007 Location: Ellicott City Age: 32 Posts: 189 Trader Rating: (6) Feedback Score: 6 reviews	Looking through the corner, nicely done. Sick car too. I need aero damnit.

06-14-2013, 10:14 AM	#17
Bmxer300zx Zilvia Member Join Date: May 2012 Location: N.Y Age: 35 Posts: 239 Trader Rating: (0) Feedback Score: 0 reviews	Nice build man looks really clean so far. That nismo clutch is a good score my buddy got that and a nismo clutch with his s13 blacktop he got from jdmenginedepot. I made him buy one of the dirty ones that they hadn't pressure washed and pillaged yet turned out to have alota goodies on it lol

06-25-2013, 10:18 PM	#20
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 31 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	got the turbo kit installed went under the knife and we have touchdown made another 1000$ order today at enjuku now back to work so i can make another paycheck and make another hefty order __________________ http://strictlycoolstuff.tumblr.com/

06-25-2013, 10:24 PM	#21
KendallH Zilvia Addict Join Date: Jan 2011 Location: Clearwater, FL Level: Master Troll Age: 29 Posts: 871 Trader Rating: (3) Feedback Score: 3 reviews	Love your motor! I'm doing the same with mine; polished/shaved VC, polished intake, clutch fan, etc. Would love to see this car in person some day. __________________

07-02-2013, 10:53 AM	#22
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 31 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	pretty much waiting on parts to arrive some of my tomei order arrived still waiting on tomei type s frp tomei fuel rail adapter tomei oil cap fmic kit cody ace a/c bracket summit order with all my -an line and fittings xrp fuel filter aeromotive fuel pump tial bov drift armor front bash bar seems like the last bits are taking forever __________________ http://strictlycoolstuff.tumblr.com/

07-02-2013, 11:22 AM	#24
Prok0 Zilvia Junkie Join Date: Apr 2003 Location: FL Age: 34 Posts: 376 Trader Rating: (0) Feedback Score: 0 reviews	Come bring that thang out to Gainesville if me and Clay throw a track day together. __________________ Sales @ Enjuku email:[email protected] phone:352-241-8399

07-02-2013, 03:03 PM	#26
Bumpkin203 Zilvia Junkie Join Date: Nov 2010 Location: Okinawa Posts: 478 Trader Rating: (13) Feedback Score: 13 reviews	Really nice build man, I also have one of the Nismo flywheels, it came on my swap so idk anything about it or how rare it is. __________________ Instagram @bankai_r32

07-02-2013, 03:56 PM	#27
Mustache240 Zilvia Addict Join Date: Jan 2011 Location: Perris Age: 29 Posts: 677 Trader Rating: (9) Feedback Score: 9 reviews	wow good shit! keep it up!

07-02-2013, 07:01 PM	#28
bc. Zilvia Addict Join Date: Aug 2010 Location: St. Louis Posts: 868 Trader Rating: (0) Feedback Score: 0 reviews	Awesomesauce!!!! What fan shroud is that? __________________ * S14SR22 * 9.0 c/r * GT3071R *

07-04-2013, 10:42 AM	#29
s14fbs Zilvia FREAK! Join Date: Apr 2009 Location: candy mountain Age: 31 Posts: 1,543 Trader Rating: (11) Feedback Score: 11 reviews	50% of the -an stuff showed up yesterday Still have to order all the 10 -an stuff for the catch can and p/s ect Just waiting to get the catch can soo can see exactly what I need __________________ http://strictlycoolstuff.tumblr.com/

07-05-2013, 03:00 AM	#30
WristWork Zilvia Addict Join Date: Jul 2012 Location: N/A Posts: 742 Trader Rating: (12) Feedback Score: 12 reviews	Keep going! Quality build right here, please never change those rims

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode