SR20DET Redtop Coolant Pipes - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Quiche2192 · 11-02-2020, 05:16 PM

I'm rebuilding my SR and I've found the coolant pipes to be in really bad shape. I can't find any online. Anyone know what I can do to either fix or replace them? Anyone know where I can find replacements? I've already spoken to someone to replate them, but there's a risk of the sandblaster blowing through the badly corroded parts. Here's an example of what I'm looking for: https://www.efisolutions.com.au/heat...x-discontinued

lok · 11-02-2020, 06:42 PM

If it's no longer available new, best bet is the WTB section.

Try and have them sandblasted and see if the corrosion is really that bad.

S14rebuild · 11-02-2020, 06:55 PM

Wouldnt be that hard to tig a set of pipes up to recreate them.

Quiche2192 · 11-10-2020, 06:32 PM

Those of you that have bypassed the throttle body and IACV coolant lines, any issues with starting the engine in cold conditions? I'm in the Southeast so I'm not too worried, but I'm still curious. I'm thinking about just getting rid of all the piping and just running the coolant line to the turbo using the mazworx VE water neck

zombiewolf513 · 11-10-2020, 06:35 PM

the coolant to the TB is for helping engine warmup, not startup. I've never had it hooked up in all sorts of climates. It's fine.

S14rebuild · 11-10-2020, 06:49 PM

Quote:

Originally Posted by Quiche2192

Those of you that have bypassed the throttle body and IACV coolant lines, any issues with starting the engine in cold conditions? I'm in the Southeast so I'm not too worried, but I'm still curious. I'm thinking about just getting rid of all the piping and just running the coolant line to the turbo using the mazworx VE water neck

I have deleted tb n ivac lines, not 1 issuse

Live in south florida n daily drive the car like that for years

zombiewolf513 · 11-10-2020, 06:55 PM

you deleted the lines to the iacv? it needs those to function properly at different coolant temps

S14rebuild · 11-10-2020, 07:08 PM

Quote:

Originally Posted by zombiewolf513

you deleted the lines to the iacv? it needs those to function properly at different coolant temps

Yup...never once had any issuses. Idled solid at 900rpm. Every time cold start, hot start 70 degree out. 99degree out. Worked perfect.

I was hesitant todo it. But came across a few threads here and i went for it. Worked good for me

zombiewolf513 · 11-10-2020, 07:10 PM

good to know

S14rebuild · 11-11-2020, 08:59 AM

Helped be declutter the mess of hoses under the intake.

Only have 1 hose there now, running from the side of the head to the back of the thermostat housing. Been convered to -10an line. Should have no leaks or busted hoses again. Looks super clean too

240boosted · 05-29-2021, 09:02 PM

Not thread jack but I like one also wish could find one without buying a motor

11-02-2020, 05:16 PM	#1
Quiche2192 Join Date: Oct 2018 Location: FL Age: 29 Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	SR20DET Redtop Coolant Pipes I'm rebuilding my SR and I've found the coolant pipes to be in really bad shape. I can't find any online. Anyone know what I can do to either fix or replace them? Anyone know where I can find replacements? I've already spoken to someone to replate them, but there's a risk of the sandblaster blowing through the badly corroded parts. Here's an example of what I'm looking for: https://www.efisolutions.com.au/heat...x-discontinued

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-02-2020, 06:42 PM	#2
lok Zilvia Addict Join Date: Jul 2003 Location: Oklahoma Posts: 790 Trader Rating: (10) Feedback Score: 10 reviews	If it's no longer available new, best bet is the WTB section. Try and have them sandblasted and see if the corrosion is really that bad.

11-02-2020, 06:55 PM	#3
S14rebuild BANNED Join Date: May 2019 Location: Florida-FAIL Posts: 2,497 Trader Rating: (8) Feedback Score: 8 reviews	Wouldnt be that hard to tig a set of pipes up to recreate them.

11-10-2020, 06:32 PM	#4
Quiche2192 Join Date: Oct 2018 Location: FL Age: 29 Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	Those of you that have bypassed the throttle body and IACV coolant lines, any issues with starting the engine in cold conditions? I'm in the Southeast so I'm not too worried, but I'm still curious. I'm thinking about just getting rid of all the piping and just running the coolant line to the turbo using the mazworx VE water neck

11-10-2020, 06:35 PM	#5
zombiewolf513 BANNED Join Date: Mar 2011 Location: AZ Age: 33 Posts: 1,682 Trader Rating: (6) Rides Gallery: zombiewolf513 Feedback Score: 6 reviews	the coolant to the TB is for helping engine warmup, not startup. I've never had it hooked up in all sorts of climates. It's fine.

11-10-2020, 06:55 PM	#7
zombiewolf513 BANNED Join Date: Mar 2011 Location: AZ Age: 33 Posts: 1,682 Trader Rating: (6) Rides Gallery: zombiewolf513 Feedback Score: 6 reviews	you deleted the lines to the iacv? it needs those to function properly at different coolant temps

11-10-2020, 07:10 PM	#9
zombiewolf513 BANNED Join Date: Mar 2011 Location: AZ Age: 33 Posts: 1,682 Trader Rating: (6) Rides Gallery: zombiewolf513 Feedback Score: 6 reviews	good to know

11-11-2020, 08:59 AM	#10
S14rebuild BANNED Join Date: May 2019 Location: Florida-FAIL Posts: 2,497 Trader Rating: (8) Feedback Score: 8 reviews	Helped be declutter the mess of hoses under the intake. Only have 1 hose there now, running from the side of the head to the back of the thermostat housing. Been convered to -10an line. Should have no leaks or busted hoses again. Looks super clean too

05-29-2021, 09:02 PM	#11
240boosted Leaky Injector Join Date: Nov 2010 Location: NYC Age: 31 Posts: 146 Trader Rating: (2) Feedback Score: 2 reviews	Not thread jack but I like one also wish could find one without buying a motor