Imarvin240

Okay so I want to explain beforehand, why I’m doing the build this way. The build was originally going to be done on my rhd S14.5 but do to a shop screwing me over (selling the parts off the car and sending the rest of the shell to a recycling yard even though they were supposed to be just doing the cage hah) I no longer had that car to build. The reason I had no idea that this was happening, was because back on December 7th 2010, my house burned down which had me a bit distracted from my car. Don't worry, everyone survived! it was just the house that needed to be dealt with. Also, the fire destroyed about 15k in parts that I was going to be placing on the S14.















At that point, I was basically building a car from scratch (except I already had money sent out for the new engine). I went through a long search, looking for a car, but I wanted to build on a chassis that I haven’t built yet. So, I looked for r32, S15, m3 e30, but I ended up finding a well-priced and 100% problem free 350z that I was able to pick up.


As for this car build, it is doing to be my modified class time attack car…and maybe see the street on an absolutely perfect day. NO CHEAP PARTS and NO CUT CORNERS will be done on this build. DON'T bother saying any negative comments about the engine/chassis combination. An SR is lighter than a VQ and is able to sit further back/lower in the engine bay giving it a better center of gravity along with a better 50/50 weight distribution. also, this car will not have any power issues (i will show you with some of the future updates) should have plenty of power for the car. I plan to have the car finished within a few years from the start of this thread…since there's a lot of work that needs to be done. one of the big things im trying to do with this build, is to be a bit different then everyone else. im trying to pick parts and do things to the car that most people dont do...that will possibly explain why I'm doing what im doing LETS GET STARTED!

This is how the car looked the day I got it!






It was also a turbo 350z at the time when i bought it but i sold all of that right when i bought it.


well, shes jacked up and ready to start getting ripped apart.


time for the engine setup to come out and go bye bye! (VINs got cut off since we are ripping the tubbing out of the engine bay, will weld VINs back onto the firewall before paint)



The Mazworx SR22VE-T is in!

Engine Specs:

Head!
Mazworx Fully Built p11 sr20ve head
CNC ported combustion chambers
Competion race 5 angle valve job
Supertech everything:
Supertech 116lb dual valve springs
Supertech Titanium retainers
Supertech valve guides
Supertech Inner valve spring seats
Supertech +1mm oversized valves.
Gasket matched and opened up exhaust ports to match intake ports
P12 cams
Greddy Adjustable Cam Gears
P12 valve cover
P12 cam angle sencor
New OEM guides
Mazworx 1/2" headstuds

Block!
CP Piston 90mm 9.0:1
CROWER I-Beam Rods
Power Enterprise 90mm head gasket with fire ring
Calico Coated ACL Bearings for Main, Rods, and Thrust Washers
ARP Main Studs
New OEM Nissan Oil Pump
Darton Ductile Iron Sleeves
New OEM Nissan SR20 Crankshaft
Nismo Pilot Roller Bearing
Oil Groove Machining
19mm Rod Bearing Machining
Check, Polish, Balance Crank
All new OEM Nissan freeze/block plugs.
ATI Damper Pulley
Greddy Oil Pan (depending on the budget, I may end up going to a dry sump system this year instead of next year)
Extended oil pickup








Mazworx intake manifold


I'll add more updates in a bit

__________________
https://instagram.com/eck_matthew/