Beems S14 build up - Page 3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

beems240sx · 02-25-2013, 09:23 PM

UPDATE: did the last finishing touches on the control arms and knuckles. This took a lot longer than I thought since the POR has to dry over night

beems240sx · 02-28-2013, 11:29 PM

Update: got some of the suspension installed.

Unfortunately my outer tie rods don't work with the inners. The outers I have are Touge factory. I'm assuming I was accidentally sold s13 inners? The treads on the inners are too small

bllabong89 · 03-02-2013, 08:57 AM

Looks good. I also use POR 15 on my parts. It is such a good product...time consuming but well worth it. Looking forward to seeing more!

beems240sx · 03-08-2013, 10:06 AM

I got a little bit more done. Still waiting on miscellaneous parts to come in. Just trying to do as much as I can for now

Installed as much as I could without the spl eccentric lock out kit

Getting the headlights ready for the clear lenses

Here is a full KA build we did for a customer. Fullrace gt30 kit with a built motor

Thmotorsports · 03-08-2013, 10:55 AM

looks good man!

beems240sx · 03-12-2013, 08:54 PM

I seriously hate waiting on parts... So I put on the front fenders

Big update soon as parts start flowing in again!

Thmotorsports · 03-13-2013, 10:12 AM

looking good, looks like 2013 is gonna be a fun time

beems240sx · 03-16-2013, 06:28 PM

Got the rear widebody fitted. Ended up getting the rivnuts from Menards. They are super easy to use and you can unbolt the fenders now

Drill a hole

Thread the piece on the tool

Do that about 20 times

JonathanPrem · 03-16-2013, 07:05 PM

^

Is that Rivet nut where you can screw it off?

Loving that purple bay. Needs more purple

beems240sx · 03-16-2013, 09:49 PM

Quote:

Originally Posted by JonathanPrem

^

Is that Rivet nut where you can screw it off?

Loving that purple bay. Needs more purple

yeah so you can just unbolt the panel if/when it breaks to fix it. whenever ive drilled out normal rivets it normally tears up the fiberglass. this was super easy

beems240sx · 03-16-2013, 11:38 PM

Finally got these all sealed up. I stupidly didn't realize the stuff I grabbed was brown until I started. So hopefully you can't see it. If you can ill just redo them

beems240sx · 03-18-2013, 08:12 PM

Got them on the car

silviaks2nr · 03-18-2013, 08:42 PM

If it's paint-able just use a plastic friendly black paint over the caulking.

VYKTR · 03-18-2013, 09:51 PM

Yeah... that brown on the headlights deff has got to go. haha

beems240sx · 03-23-2013, 11:19 PM

Got my Touge factory tie rods installed

Boss s14 · 03-24-2013, 12:34 AM

why touge and not thmotorsports?? touge's a bit expensive wondering why you choose them

beems240sx · 03-24-2013, 04:45 AM

Quote:

Originally Posted by Boss s14

why touge and not thmotorsports?? touge's a bit expensive wondering why you choose them

well i have an account with both through my shop, touge has better deals. i got these on black friday for $50. really couldnt complain.

Irresistible · 03-24-2013, 04:50 AM

Damn, that's a good price. I should scoop myself up a pair...

beems240sx · 03-25-2013, 08:33 PM

Got the trans installed finally

That purple stuff

And I used plastidip to hide that hideous brown

Just ordered another wave of parts too!

Thmotorsports · 03-26-2013, 04:39 PM

We should totally swap radiators still

beems240sx · 03-26-2013, 06:09 PM

Quote:

Originally Posted by Thmotorsports

We should totally swap radiators still

Alan? Haha nah I'm good with mine!

Thmotorsports · 03-27-2013, 11:45 AM

Yeah haha dang im stuck with this s14 sr mishimoto -.- guess ill have to fab it up

beems240sx · 03-27-2013, 12:43 PM

Quote:

Originally Posted by Thmotorsports

Yeah haha dang im stuck with this s14 sr mishimoto -.- guess ill have to fab it up

Call mishi to see if they will swap it. They have the lifetime warranty so they might be. Cool about it

rawgarage · 03-27-2013, 04:12 PM

great build...coming along well... any suggestions on where can I buy that rivet gun?

beems240sx · 03-27-2013, 06:08 PM

Quote:

Originally Posted by bwoodballa

great build...coming along well... any suggestions on where can I buy that rivet gun?

I bought it from Menards haha. $27 with rivnuts and bolts. I don't know why everyone doesn't do this.. Best way to mount them

beems240sx · 03-28-2013, 09:47 PM

Made a plate to mount the fuel pump

Mounted the two fuel filters

my down pipe came in!

rawgarage · 04-08-2013, 12:49 AM

Quote:

Originally Posted by beems240sx

I bought it from Menards haha. $27 with rivnuts and bolts. I don't know why everyone doesn't do this.. Best way to mount them

went on their online store...couldnt find it...im gonna use it...

Stensland86 · 04-08-2013, 10:07 AM

Great build! wheres your shop located?

beems240sx · 04-08-2013, 06:03 PM

Quote:

Originally Posted by Stensland86

Great build! wheres your shop located?

It's in Addison Illinois.

Picked up some Work XD9 from my buddy 18x10 +18. Getting the refinished gloss white. I also ordered two new ones that are of course back ordered for a few weeks. Plan it to run these with spacers for a little while the slap them and slam the Fd

beems240sx · 04-10-2013, 10:08 PM

Did some messing around trying to fit things together, still needs some tweaking but that will come after paint

02-25-2013, 09:23 PM	#61
beems240sx Zilvia FREAK! Join Date: Jun 2008 Location: Phoenix Posts: 1,135 Trader Rating: (10) Feedback Score: 10 reviews	UPDATE: did the last finishing touches on the control arms and knuckles. This took a lot longer than I thought since the POR has to dry over night __________________

02-28-2013, 11:29 PM	#62
beems240sx Zilvia FREAK! Join Date: Jun 2008 Location: Phoenix Posts: 1,135 Trader Rating: (10) Feedback Score: 10 reviews	Update: got some of the suspension installed. Unfortunately my outer tie rods don't work with the inners. The outers I have are Touge factory. I'm assuming I was accidentally sold s13 inners? The treads on the inners are too small __________________

03-02-2013, 08:57 AM	#63
bllabong89 Zilvia Junkie Join Date: Jan 2010 Location: STL Age: 33 Posts: 503 Trader Rating: (7) Feedback Score: 7 reviews	Looks good. I also use POR 15 on my parts. It is such a good product...time consuming but well worth it. Looking forward to seeing more! __________________ http://zilvia.net/f/chat/331550-slyd...pic-heavy.html

03-08-2013, 10:06 AM	#64
beems240sx Zilvia FREAK! Join Date: Jun 2008 Location: Phoenix Posts: 1,135 Trader Rating: (10) Feedback Score: 10 reviews	I got a little bit more done. Still waiting on miscellaneous parts to come in. Just trying to do as much as I can for now Installed as much as I could without the spl eccentric lock out kit Getting the headlights ready for the clear lenses Here is a full KA build we did for a customer. Fullrace gt30 kit with a built motor __________________

03-12-2013, 08:54 PM	#66
beems240sx Zilvia FREAK! Join Date: Jun 2008 Location: Phoenix Posts: 1,135 Trader Rating: (10) Feedback Score: 10 reviews	I seriously hate waiting on parts... So I put on the front fenders Big update soon as parts start flowing in again! __________________

03-08-2013, 10:55 AM	#65
Thmotorsports Zilvia.net Advertiser Join Date: Apr 2007 Location: Chicago, IL Age: 41 Posts: 2,810 Trader Rating: (28) Feedback Score: 28 reviews	looks good man!

03-13-2013, 10:12 AM	#67
Thmotorsports Zilvia.net Advertiser Join Date: Apr 2007 Location: Chicago, IL Age: 41 Posts: 2,810 Trader Rating: (28) Feedback Score: 28 reviews	looking good, looks like 2013 is gonna be a fun time

03-16-2013, 06:28 PM	#68
beems240sx Zilvia FREAK! Join Date: Jun 2008 Location: Phoenix Posts: 1,135 Trader Rating: (10) Feedback Score: 10 reviews	Got the rear widebody fitted. Ended up getting the rivnuts from Menards. They are super easy to use and you can unbolt the fenders now Drill a hole Thread the piece on the tool Do that about 20 times __________________

03-16-2013, 07:05 PM	#69
JonathanPrem Zilvia Addict Join Date: Sep 2010 Location: Toronto Ontario Posts: 729 Trader Rating: (9) Feedback Score: 9 reviews	^ Is that Rivet nut where you can screw it off? Loving that purple bay. Needs more purple __________________ IG-jonathanprem

03-16-2013, 11:38 PM	#71
beems240sx Zilvia FREAK! Join Date: Jun 2008 Location: Phoenix Posts: 1,135 Trader Rating: (10) Feedback Score: 10 reviews	Finally got these all sealed up. I stupidly didn't realize the stuff I grabbed was brown until I started. So hopefully you can't see it. If you can ill just redo them __________________

03-18-2013, 08:12 PM	#72
beems240sx Zilvia FREAK! Join Date: Jun 2008 Location: Phoenix Posts: 1,135 Trader Rating: (10) Feedback Score: 10 reviews	Got them on the car __________________

03-18-2013, 08:42 PM	#73
silviaks2nr Nissanaholic! Join Date: Nov 2004 Location: SC Posts: 2,106 Trader Rating: (10) Feedback Score: 10 reviews	If it's paint-able just use a plastic friendly black paint over the caulking. __________________ '98 240sx 5spd

03-18-2013, 09:51 PM	#74
VYKTR Zilvia Junkie Join Date: Jul 2005 Location: California Age: 31 Posts: 423 Trader Rating: (36) Feedback Score: 36 reviews	Yeah... that brown on the headlights deff has got to go. haha __________________ BLOG / TUMBLR

03-23-2013, 11:19 PM	#75
beems240sx Zilvia FREAK! Join Date: Jun 2008 Location: Phoenix Posts: 1,135 Trader Rating: (10) Feedback Score: 10 reviews	Got my Touge factory tie rods installed __________________

03-24-2013, 12:34 AM	#76
Boss s14 Leaky Injector Join Date: Sep 2012 Location: chicago Posts: 115 Trader Rating: (1) Feedback Score: 1 reviews	why touge and not thmotorsports?? touge's a bit expensive wondering why you choose them

03-24-2013, 04:50 AM	#78
Irresistible Nissanaholic! Join Date: Dec 2009 Location: Chicago, IL Posts: 1,994 Trader Rating: (21) Feedback Score: 21 reviews	Damn, that's a good price. I should scoop myself up a pair... __________________ GLEAM//★☆Street Dancer☆★ IG: streetdncr // tumblr: steve-strtdncr

03-25-2013, 08:33 PM	#79
beems240sx Zilvia FREAK! Join Date: Jun 2008 Location: Phoenix Posts: 1,135 Trader Rating: (10) Feedback Score: 10 reviews	Got the trans installed finally That purple stuff And I used plastidip to hide that hideous brown Just ordered another wave of parts too! __________________

03-26-2013, 04:39 PM	#80
Thmotorsports Zilvia.net Advertiser Join Date: Apr 2007 Location: Chicago, IL Age: 41 Posts: 2,810 Trader Rating: (28) Feedback Score: 28 reviews	We should totally swap radiators still

03-27-2013, 11:45 AM	#82
Thmotorsports Zilvia.net Advertiser Join Date: Apr 2007 Location: Chicago, IL Age: 41 Posts: 2,810 Trader Rating: (28) Feedback Score: 28 reviews	Yeah haha dang im stuck with this s14 sr mishimoto -.- guess ill have to fab it up

03-27-2013, 04:12 PM	#84
rawgarage Banned from the Marketplace Join Date: Oct 2007 Location: h o u s t o n Age: 32 Posts: 5,990 Trader Rating: (75) Feedback Score: 75 reviews	great build...coming along well... any suggestions on where can I buy that rivet gun?

03-28-2013, 09:47 PM	#86
beems240sx Zilvia FREAK! Join Date: Jun 2008 Location: Phoenix Posts: 1,135 Trader Rating: (10) Feedback Score: 10 reviews	Made a plate to mount the fuel pump Mounted the two fuel filters my down pipe came in! __________________

04-08-2013, 10:07 AM	#88
Stensland86 Join Date: Feb 2013 Location: Brooklyn, WI Posts: 15 Trader Rating: (0) Feedback Score: 0 reviews	Great build! wheres your shop located?

04-10-2013, 10:08 PM	#90
beems240sx Zilvia FREAK! Join Date: Jun 2008 Location: Phoenix Posts: 1,135 Trader Rating: (10) Feedback Score: 10 reviews	Did some messing around trying to fit things together, still needs some tweaking but that will come after paint __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode