SR20 harness plug identification. Minimum wiring to make run. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

KingSpence · 02-26-2012, 02:24 AM

I figure about now would be a good time to tear into the wiring on the Corolla. It's an s13 redtop sr20det in a 1985 Toyota Corolla. I've got the harness pulled from the engine, and known plugs are marked. I need help identifying the plugs I am confused about, and which plugs are necessary to make the engine run. I want to open up the harness to lengthen and shorten as necessary, but I would also like to eliminate all unused plugs from the harness to not only make initial wiring easier, but any troubleshooting in the future as well. I'm not running a/c or powersteering, CONSULT, and aftermarket gauges throughout.

1-???? (plugs in between 3 and 4 intake runner)
2-AAC Valve maybe??? (plugs in between 3 and 4 intake runner)
3-Wastegate Valve control solenoid? Needed?
4-EGR Sensor? Needed?
5-????
6-????
7-????
8-????
9-H20 temp sensor. (found on the side of the head next to the throttle body.) Is this needed?

attracted · 02-26-2012, 07:55 AM

1..iacv
2..knock sensor
3..boost control
4..egr valve
5...i believe its p/s
6..7...8..test connector for the harness
9..water temp..ecu and cluster

minimum you need to run the engine would be

cas
water temp ecu
tps
maf/map
injectors
coils

iacv if you want idle
knock depending on ecu using...good tool to have

KingSpence · 02-26-2012, 12:14 PM

Quote:

Originally Posted by attracted

iacv if you want idle
knock depending on ecu using...good tool to have

What do you mean by this? Are you saying it's nessesary for the car to idle, or just a high idle on cold startup? I'm running a Central 20 tuned ecu.

Also, being in a Corolla, are the 6,7, and 8 engine check connectors going to help me at all with any troubleshooting, or should I just get rid of them?

deucenickeltre · 09-28-2017, 08:58 PM

boss thanks

02-26-2012, 02:24 AM	#1
KingSpence Join Date: Feb 2012 Location: Edmonton, AB Age: 30 Posts: 30 Trader Rating: (0) Feedback Score: 0 reviews	SR20 harness plug identification. Minimum wiring to make run. I figure about now would be a good time to tear into the wiring on the Corolla. It's an s13 redtop sr20det in a 1985 Toyota Corolla. I've got the harness pulled from the engine, and known plugs are marked. I need help identifying the plugs I am confused about, and which plugs are necessary to make the engine run. I want to open up the harness to lengthen and shorten as necessary, but I would also like to eliminate all unused plugs from the harness to not only make initial wiring easier, but any troubleshooting in the future as well. I'm not running a/c or powersteering, CONSULT, and aftermarket gauges throughout. 1-???? (plugs in between 3 and 4 intake runner) 2-AAC Valve maybe??? (plugs in between 3 and 4 intake runner) 3-Wastegate Valve control solenoid? Needed? 4-EGR Sensor? Needed? 5-???? 6-???? 7-???? 8-???? 9-H20 temp sensor. (found on the side of the head next to the throttle body.) Is this needed?

02-26-2012, 07:55 AM	#2
attracted Leaky Injector Join Date: Sep 2005 Location: montreal Posts: 55 Trader Rating: (0) Feedback Score: 0 reviews	1..iacv 2..knock sensor 3..boost control 4..egr valve 5...i believe its p/s 6..7...8..test connector for the harness 9..water temp..ecu and cluster minimum you need to run the engine would be cas water temp ecu tps maf/map injectors coils iacv if you want idle knock depending on ecu using...good tool to have __________________ Av Fab...2012 st elzear ouest laval,quebec canada avfabrication.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-28-2017, 08:58 PM	#4
deucenickeltre Join Date: Sep 2017 Location: washington Age: 31 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	boss thanks