Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 07-05-2015, 07:08 PM   #1
azreark1
Leaky Injector
 
Join Date: Feb 2015
Location: San Antonio, Tx
Age: 36
Posts: 71
Trader Rating: (0)
azreark1 is an unknown quantity at this point
Feedback Score: 0 reviews
Couple SR Problems

So first problem is that i'm getting good fuel pressure but it's running on the lean side (14-15 at idle) and 13 at WOT with misfire (will be checking plug gap). Has good acceleration with an easy gas pedal but at WOT it bogs and misfires. I'm thinking the injectors might be bad, what do you think?...motor has FMIC, and T28 turbo but stock otherwise.

Next problem is the gear ratio...so my speedometer is telling me i'm doing 80 when i'm only doing 70, and it stays roughly around the same 10mph difference through the whole range. At 80mph indicated, the car is sitting at 3500rpm, it sounds a little high and has really good acceleration so i'm thinking that the gear ratio's were changed or it has the wrong speedo gear in the tranny? Any way to confirm this without tearing the rear end or tranny apart? What are your highway speeds and rpms?
azreark1 is offline   Reply With Quote
Sponsored Links
Old 07-05-2015, 07:32 PM   #2
jr_ss
Post Whore!
 
Join Date: Dec 2005
Location: Pa
Posts: 6,052
Trader Rating: (34)
jr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nicejr_ss is just really nice
Feedback Score: 34 reviews
Send a message via AIM to jr_ss
Rotate drive shaft by hand. Count how many turns it takes to get your wheel to rotate 360 degrees. That's a pretty good indication of what your FD is.

Stop going WOT until you figure out the lean issue. You're only going to break something. What boost pressure are you at?
__________________
My SR20VET
jr_ss is offline   Reply With Quote
Old 07-05-2015, 07:50 PM   #3
azreark1
Leaky Injector
 
Join Date: Feb 2015
Location: San Antonio, Tx
Age: 36
Posts: 71
Trader Rating: (0)
azreark1 is an unknown quantity at this point
Feedback Score: 0 reviews
Yeah I'm not going WOT a lot, just rebuilt my motor, but ran it WOT a few times to see the readings on the UEGO. I currently don't have a boost gauge, but it has stock internal wastegate so unless it's broke, it's 7-8psi.
azreark1 is offline   Reply With Quote
Old 07-05-2015, 09:09 PM   #4
azreark1
Leaky Injector
 
Join Date: Feb 2015
Location: San Antonio, Tx
Age: 36
Posts: 71
Trader Rating: (0)
azreark1 is an unknown quantity at this point
Feedback Score: 0 reviews
But now that I think of it, with all the rest of the crap I've found wrong while fixing up this car, wouldn't surprise me if the wastegate was jerry rigged to up the boost
azreark1 is offline   Reply With Quote
Old 07-10-2015, 04:43 PM   #5
azreark1
Leaky Injector
 
Join Date: Feb 2015
Location: San Antonio, Tx
Age: 36
Posts: 71
Trader Rating: (0)
azreark1 is an unknown quantity at this point
Feedback Score: 0 reviews
Out of curiosity, what function does the cushion ring spacer do in the injector cap do? Needless to say i want to say it actually might be bad injectors, the pic shows how they came out of the car, with two of them missing the cushion rings.
Attached Images
File Type: jpg IMG_20150710_164735.jpg (467.6 KB, 9 views)
azreark1 is offline   Reply With Quote
Old 07-10-2015, 08:53 PM   #6
Kis4Kouki
Leaky Injector
 
Kis4Kouki's Avatar
 
Join Date: Feb 2015
Location: High Point, NC
Posts: 111
Trader Rating: (3)
Kis4Kouki is an unknown quantity at this point
Feedback Score: 3 reviews
do you have a walboro or other aftermarket pump to support the fuel system. and a boost gauge would be a good investment.
Kis4Kouki is offline   Reply With Quote
Old 07-15-2015, 08:58 PM   #7
azreark1
Leaky Injector
 
Join Date: Feb 2015
Location: San Antonio, Tx
Age: 36
Posts: 71
Trader Rating: (0)
azreark1 is an unknown quantity at this point
Feedback Score: 0 reviews
okay i've checked everything i can think of...i replaced injectors, re-wired the fuel pump, double and triple checked for boost leaks, disconnected wastegate, it still does the same thing...any other idea's? Only thing i can think of now is it's blowing the spark out but they are gaped at .028", and color looks okay on the plugs. Could the plugs be going bad? And the coils look good, can't see any cracks that are obvious...
azreark1 is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:00 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™