nissan oem 5 lug replacement bearing? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

paintballers89 · 11-02-2011, 08:32 PM

i have searched all over zilvia and i cant find this info i already have a 5 lug set up on my s14 but one of the bearings went so im just looking for a bearing i can press on is there a part number or something i can go into a napa and just pick it up or do i need to buy the hole hub and bearing pre pressed agean any one help me out please

rps13ka · 11-05-2011, 07:43 AM

to my knowledge, you can buy the baring seperate from napa or autozone or whatever, but you have to have the hub pressed out of the old bearing and pressed into the new one.

az_240 · 11-05-2011, 09:30 AM

S14 has an integrated bearing in the front... you'll need to get new hubs.

*fliprayzin240sx* · 11-06-2011, 03:49 PM

^^^This, time to go to the dealer and order a new front hub. Last time i bought one, it was about $160.

11-02-2011, 08:32 PM	#1
paintballers89 Join Date: Mar 2010 Location: subs of philly Age: 32 Posts: 45 Trader Rating: (0) Feedback Score: 0 reviews	nissan oem 5 lug replacement bearing? i have searched all over zilvia and i cant find this info i already have a 5 lug set up on my s14 but one of the bearings went so im just looking for a bearing i can press on is there a part number or something i can go into a napa and just pick it up or do i need to buy the hole hub and bearing pre pressed agean any one help me out please

11-06-2011, 03:49 PM	#4
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	^^^This, time to go to the dealer and order a new front hub. Last time i bought one, it was about $160. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-05-2011, 07:43 AM	#2
rps13ka Join Date: Mar 2007 Location: NOR CAL Age: 34 Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	to my knowledge, you can buy the baring seperate from napa or autozone or whatever, but you have to have the hub pressed out of the old bearing and pressed into the new one.

11-05-2011, 09:30 AM	#3
az_240 Post Whore! Join Date: Jan 2006 Location: Phx Posts: 3,097 Trader Rating: (41) Feedback Score: 41 reviews	S14 has an integrated bearing in the front... you'll need to get new hubs.