High Oil Pressure - 1989 S13 SR20 Redtop - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

adjusts · 11-27-2017, 11:29 AM

Hey guys,

Ever since I bought the car, I've noticed the oil light on the dash come on. I checked the oil level, and it seems to be fine. I check routinely too. Oil light is still on.

The previous owner had installed a Blitz DC Oil Pressure Gauge. For some reason, at idle at normal operation temps (I'm running 5w30 synthetic), I am reading the following value:

Is this normal for a redtop SR20 at idle? I read that normal idle should be around 11-15 PSI. Any help is appreciated, I don't feel like driving the car with the light on. Maybe its a bad sensor?

adjusts · 11-28-2017, 11:46 AM

bump. When the car first starts, the gauge runs at full sweep (10 bar), and stays at 10 bar until it goes to operating temperature, then it goes down to 6.3 bar.

BigKriss · 11-28-2017, 09:28 PM

First step is to check oil pressure by means of a mechanical gauge. I have a Snap On test gauge. Once you determine the actual oil pressure you can now eliminate the bad components be it the low oil pressure switch it the Greddy gauge.

11-27-2017, 11:29 AM	#1
adjusts Leaky Injector Join Date: Mar 2017 Location: CA Posts: 88 Trader Rating: (0) Feedback Score: 0 reviews	High Oil Pressure - 1989 S13 SR20 Redtop Hey guys, Ever since I bought the car, I've noticed the oil light on the dash come on. I checked the oil level, and it seems to be fine. I check routinely too. Oil light is still on. The previous owner had installed a Blitz DC Oil Pressure Gauge. For some reason, at idle at normal operation temps (I'm running 5w30 synthetic), I am reading the following value: Is this normal for a redtop SR20 at idle? I read that normal idle should be around 11-15 PSI. Any help is appreciated, I don't feel like driving the car with the light on. Maybe its a bad sensor? Last edited by adjusts; 11-27-2017 at 12:07 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-28-2017, 11:46 AM	#2
adjusts Leaky Injector Join Date: Mar 2017 Location: CA Posts: 88 Trader Rating: (0) Feedback Score: 0 reviews	bump. When the car first starts, the gauge runs at full sweep (10 bar), and stays at 10 bar until it goes to operating temperature, then it goes down to 6.3 bar.

11-28-2017, 09:28 PM	#3
BigKriss Leaky Injector Join Date: Dec 2012 Location: South Africa Posts: 141 Trader Rating: (0) Feedback Score: 0 reviews	First step is to check oil pressure by means of a mechanical gauge. I have a Snap On test gauge. Once you determine the actual oil pressure you can now eliminate the bad components be it the low oil pressure switch it the Greddy gauge.