removing front 350z subframe. Help? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

MartinMoose · 05-06-2015, 04:29 PM

Recently i cracked my oil pan by tightening the oil pressure sensor a bit too tight. i Tried to JB Weld it with Marine Weld but it can only hold so much heat. Oil keeps seeping out no matter how much jb weld i put on, so i had to give in and accept the fact that I'm gonna have to drop the subframe to remove the upper oil pan.

Does anyone know of a DIY or can at least give me steps? Pictures will help out. *Picture is worth a thousands words*

TIA!

05-06-2015, 04:29 PM	#1
MartinMoose Join Date: Apr 2013 Location: Baldwin Park Age: 27 Posts: 29 Trader Rating: (0) Feedback Score: 0 reviews	removing front 350z subframe. Help? Recently i cracked my oil pan by tightening the oil pressure sensor a bit too tight. i Tried to JB Weld it with Marine Weld but it can only hold so much heat. Oil keeps seeping out no matter how much jb weld i put on, so i had to give in and accept the fact that I'm gonna have to drop the subframe to remove the upper oil pan. Does anyone know of a DIY or can at least give me steps? Pictures will help out. Picture is worth a thousands words TIA! __________________ WTB/TRADE FROM YOU: -350Z B PILLARS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode