sr20det oil filter help???????? - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ka-t · 12-30-2011, 09:10 AM

Quote:

Originally Posted by weshole

The Napa filter (which is made by Wix) is 1396. Very good quality filter imho.

Dont know if its an update or not but the new napa filter book calls for a 1394 filter for the 1991 2.0 sentra

*fliprayzin240sx* · 12-31-2011, 01:59 AM

Quote:

Originally Posted by gotta240

Thanks!!!! So to clarify, filters dont have different pressure relief valves, or resistance to them? Just different sizes, right?

Why doesnt everyone stop running these tiny ass filters then? Its not like the sr20 carries a lot of oil as is.....it needs every additional drop you can fit

Well, in Japan, I was running larger filter off Skylines. Then again, not sure if the oil filter relocation kit I'm using is a mix and matched setup.

I got buddies who swear up and down on Toyota filters, just cant remember off the top of my head which filter. I think he said Tacoma...again not 100% and no clue on the year. He had box full of it...

s13 loverr · 12-31-2011, 01:45 PM

http://zilvia.net/f/chat/265699-read...l-filters.html

ta da!

rb25_s13*CHUKI · 12-31-2011, 01:55 PM

Quote:

Originally Posted by fliprayzin240sx

Who told you that crap???

Its not crap they did a video about oem filters that are made by honey well, Nissan and subaru are the worst ones. Even dodge has better oem filters than nissan

rb25_s13*CHUKI · 12-31-2011, 01:55 PM

Also a good big filter is a M-208 mobile 1 filter

didderson · 01-01-2012, 12:34 PM

I'm very surprised nobody said anything about the purolator pure one sooner. Fail. Teflon infused poly oring and drainback valve win.

Quote:

Originally Posted by projectRDM

Explain how an oil filter can produce better oil pressure.

The two constraints that hold engineers to filters are mainly maximum flow and minimum particle size. When creating a filter to handle .01 micron particles, it's hard to allow a lot of fluid flow to pass through per unit time.

With a greater more free flowing filter element, pressure DROP across the filter paper is decreased, which increases your effective oil pressure at its destination.

Jersthecool · 01-01-2012, 02:26 PM

I use the z32 300zx mobil 1 filter on my s13 blacktop and it works perfect

OutlawLui · 10-05-2012, 09:06 AM

Quote:

Originally Posted by fliprayzin240sx

Easiest way to remember it...Redtops = 91 SER ; Blacktop = 95 SER.

WTF??

i thought S13 blacktop,and red top were both same size Filters

Dont you mean S13 blacktop/redtop : 91 SER

S14/S15 Blacktop : 95 SER.

?

Shit like this confuses people

Morphious · 10-05-2012, 11:41 AM

Think that is for the S14 SRs.

zurud · 10-06-2012, 03:17 AM

redtop oil filter thread is 3/4 -16 unf-2b sae thread. blacktop and later model is m20x1.5 thread . It almost interchangeable but its not tight. My friends just replacing his main and rod bearing because he uses metric one on the red top. The oil filter just fell off.

OutlawLui · 10-06-2012, 07:39 PM

I just installed a ka24de oil stp filter on my sr20det(redtop) . Hope all goes good. Oil filters popping sounds like a nightmare

blkvrtswp · 10-09-2012, 01:16 PM

KA24DE oil filters DO NOT WORK ON SR20DET! I mean, where did you get that idea?

Prepare for failure.

OutlawLui · 10-09-2012, 04:42 PM

Quote:

Originally Posted by blkvrtswp

KA24DE oil filters DO NOT WORK ON SR20DET! I mean, where did you get that idea?

Prepare for failure.

Really? is that why it hasn't fallen off and is working fine?

Pinggg · 10-10-2012, 07:23 PM

I use a toyota oil filter PN# ending in F1 on my s13 redtop.

camry · 10-11-2012, 06:49 AM

Hope this helps. http://nissan4u.com/parts/info/1520865F00/

Based on the Nissan part number, you can see what cars share the same filter.

badbob2121 · 10-11-2012, 07:11 AM

Quote:

Originally Posted by evilpanamajack

Really? is that why it hasn't fallen off and is working fine?

Just because it hasnt yet.. doesnt mean it wont.

I dont see how this is so hard to figure out.. There are plenty of vendors on this site that sell SR20det specific oil filters, both S13 and S14/15. So just order online..

fullthrottle · 10-11-2012, 08:47 AM

The early 90s sentra ser had an sr20. I use that filter and the damn search button next time

Sent from my SGH-T769 using Tapatalk 2

OutlawLui · 10-11-2012, 01:38 PM

Quote:

Originally Posted by badbob2121

Just because it hasnt yet.. doesnt mean it wont.

I dont see how this is so hard to figure out.. There are plenty of vendors on this site that sell SR20det specific oil filters, both S13 and S14/15. So just order online..

Doesn't mean it wont?.

So its a fact??? that it doesn't work? what will not work about it exactly?

Really need to know, so i can change it asap.

I got a 91 Sentra oil filter from the 2.0 engine, and that shit was too small

OutlawLui · 10-11-2012, 01:41 PM

I read that
SR20DET S13, CA18DET S13, KA24E S13, KA24DE S13 and S14

all have interchangeable oil filters

godsmack · 10-11-2012, 04:44 PM

Quote:

Originally Posted by evilpanamajack

I read that
SR20DET S13, CA18DET S13, KA24E S13, KA24DE S13 and S14

all have interchangeable oil filters

Not at all. I know for a fact that S13 Sr's and S14 Sr's are different thread patterns. S14 Sr's have M20 x 1.5 thread pattern and the S13's are different. Not 100% on the actual thread pattern but they're different.

The filter that I use for S14 SR is one for the GTR. Napa gold number 7356. It's got a decent size and flows more than most others that fit for the same thread pattern.

weirdchris555 · 10-11-2012, 04:46 PM

This is getting blown way out of proportion. Op , walk into an auto store, ask for a filter for a 1993 nissan sentra se-r, ???, profit. That is what I do each time. Mobile 1 filter

Sent from my SCH-I405 using Tapatalk 2

OutlawLui · 10-11-2012, 04:51 PM

Quote:

Originally Posted by godsmack

Not at all. I know for a fact that S13 Sr's and S14 Sr's are different thread patterns. S14 Sr's have M20 x 1.5 thread pattern and the S13's are different. Not 100% on the actual thread pattern but they're different.

The filter that I use for S14 SR is one for the GTR. Napa gold number 7356. It's got a decent size and flows more than most others that fit for the same thread pattern.

I did not include s14 sr's in there. It ment s14 Ka's

Charles240sxSr20det · 04-26-2013, 07:00 PM

mobile one M-103 redtop

Charles240sxSr20det · 04-26-2013, 07:02 PM

mobile one M1-103

racers4life77 · 08-03-2014, 06:44 PM

This thread helped me, so i thought i"d give back.
For a 95 sr20det notch top.
Been using an oil filter for a 08 350z Mobil one part#M1-108. It's smaller then the stock sr filter, so on my next oil change took the old oil filter to pep boys and 45 min later found a filter from a 09 GTR, Mobil one part# M1-110, Royal purple part# 10-2867.
fits perfect and is taller.

350z filter i used. part#10-2876 royal purple

GTR filter i'm using now. part#10-2867 royal purple

comparison. taller one is for the GTR. smaller one is 350z.

Pep boys price.

Hope this helps.

12-31-2011, 01:55 PM	#35
rb25_s13*CHUKI Post Whore! Join Date: Mar 2007 Location: Cali Age: 32 Posts: 2,759 Trader Rating: (16) Feedback Score: 16 reviews	Also a good big filter is a M-208 mobile 1 filter __________________ Obliterate

10-06-2012, 07:39 PM	#41
OutlawLui Zilvia FREAK! Join Date: Apr 2011 Location: Anaheim CA Age: 35 Posts: 1,491 Trader Rating: (19) Feedback Score: 19 reviews	I just installed a ka24de oil stp filter on my sr20det(redtop) . Hope all goes good. Oil filters popping sounds like a nightmare __________________ .

10-11-2012, 01:41 PM	#49
OutlawLui Zilvia FREAK! Join Date: Apr 2011 Location: Anaheim CA Age: 35 Posts: 1,491 Trader Rating: (19) Feedback Score: 19 reviews	I read that SR20DET S13, CA18DET S13, KA24E S13, KA24DE S13 and S14 all have interchangeable oil filters __________________ .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-31-2011, 01:45 PM	#33
s13 loverr Zilvia Member Join Date: Jul 2010 Location: New Mexico Posts: 203 Trader Rating: (6) Feedback Score: 6 reviews	http://zilvia.net/f/chat/265699-read...l-filters.html ta da!

01-01-2012, 02:26 PM	#37
Jersthecool Zilvia Junkie Join Date: Jul 2010 Location: Calgary, Canada Posts: 342 Trader Rating: (0) Feedback Score: 0 reviews	I use the z32 300zx mobil 1 filter on my s13 blacktop and it works perfect

10-05-2012, 11:41 AM	#39
Morphious Join Date: Aug 2006 Location: N.O. Age: 36 Posts: 32 Trader Rating: (3) Feedback Score: 3 reviews	Think that is for the S14 SRs.

10-06-2012, 03:17 AM	#40
zurud Zilvia Junkie Join Date: Aug 2009 Location: evansville, in Posts: 391 Trader Rating: (4) Feedback Score: 4 reviews	redtop oil filter thread is 3/4 -16 unf-2b sae thread. blacktop and later model is m20x1.5 thread . It almost interchangeable but its not tight. My friends just replacing his main and rod bearing because he uses metric one on the red top. The oil filter just fell off.

10-09-2012, 01:16 PM	#42
blkvrtswp Zilvia Addict Join Date: Oct 2012 Location: NY Posts: 691 Trader Rating: (9) Feedback Score: 9 reviews	KA24DE oil filters DO NOT WORK ON SR20DET! I mean, where did you get that idea? Prepare for failure.

10-10-2012, 07:23 PM	#44
Pinggg Zilvia FREAK! Join Date: Dec 2010 Location: Coconut Creek, Florida Age: 28 Posts: 1,255 Trader Rating: (22) Feedback Score: 22 reviews	I use a toyota oil filter PN# ending in F1 on my s13 redtop.

10-11-2012, 06:49 AM	#45
camry Leaky Injector Join Date: Jul 2007 Location: Philadelphia Posts: 55 Trader Rating: (2) Feedback Score: 2 reviews	Hope this helps. http://nissan4u.com/parts/info/1520865F00/ Based on the Nissan part number, you can see what cars share the same filter.

10-11-2012, 08:47 AM	#47
fullthrottle Zilvia Addict Join Date: Apr 2009 Location: Saint Louis, MO Age: 34 Posts: 661 Trader Rating: (13) Feedback Score: 13 reviews	The early 90s sentra ser had an sr20. I use that filter and the damn search button next time Sent from my SGH-T769 using Tapatalk 2

10-11-2012, 04:46 PM	#51
weirdchris555 Leaky Injector Join Date: Mar 2009 Location: Massachusetts Posts: 101 Trader Rating: (3) Feedback Score: 3 reviews	This is getting blown way out of proportion. Op , walk into an auto store, ask for a filter for a 1993 nissan sentra se-r, ???, profit. That is what I do each time. Mobile 1 filter Sent from my SCH-I405 using Tapatalk 2

04-26-2013, 07:00 PM	#53
Charles240sxSr20det Join Date: Mar 2012 Location: Quebec, Canada Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	mobile one M-103 redtop

04-26-2013, 07:02 PM	#54
Charles240sxSr20det Join Date: Mar 2012 Location: Quebec, Canada Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	mobile one M1-103

08-03-2014, 06:44 PM	#55
racers4life77 Join Date: May 2006 Location: tampa Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	This thread helped me, so i thought i"d give back. For a 95 sr20det notch top. Been using an oil filter for a 08 350z Mobil one part#M1-108. It's smaller then the stock sr filter, so on my next oil change took the old oil filter to pep boys and 45 min later found a filter from a 09 GTR, Mobil one part# M1-110, Royal purple part# 10-2867. fits perfect and is taller. 350z filter i used. part#10-2876 royal purple GTR filter i'm using now. part#10-2867 royal purple comparison. taller one is for the GTR. smaller one is 350z. Pep boys price. Hope this helps.