MD s13 parts for sale - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

duballstar37 · 01-03-2009, 08:39 AM

I cleaned my garage out last weekend and found some parts laying around. Before I junk them I decided to see if anyone needs anything. Make offers on anything because this stuff is no good to me.

Tension Rod Brackets (driver and passenger) $20 shipped each

Automatic Brake Pedal $15

Complete KA24DE tranny without 5th gear due to a bad synchro. Four gear was starting to go as well, but would still hold. I'm willing to part it out specifically or sell it as a whole to get rebuilt which usually is around ~$250. Just make offers on parts or the whole thing.

Shifter trim $20

Clutch Dampening Device $10 shipped

KA24DE Ignition coil $25 shipped

SR20 AIV Assembly $25

SR20 A/C Compressor $35

SR20 Coilpack over "INTERCOOLER TURBO" $25

lightsource · 01-03-2009, 09:09 AM

The SR AC Compressor, how well does it work and do I need any additional hardwares to install it?

duballstar37 · 01-03-2009, 10:01 AM

It came off my working SR motor before I installed it so I would assume it is working just like the motor. As long as you have the existing bracket on the motor it will bolt right up without any other hardware.

superbraut · 01-03-2009, 04:35 PM

deleting .

duballstar37 · 01-03-2009, 08:42 PM

Nope came from my auto. Its actually very clean.

duballstar37 · 02-17-2009, 11:32 AM

Bump to the tizzy

Yuda · 03-09-2009, 11:16 PM

pm sent for the brackets

duballstar37 · 03-18-2009, 12:00 AM

Tension rod brackets sold to Yuda.

I have a q45 throttle body for sale also.

duballstar37 · 03-31-2009, 05:16 PM

Anyone want this stuff before I trash it?

01-03-2009, 08:39 AM	#1
duballstar37 Zilvia Junkie Join Date: Aug 2007 Location: Eastbound and Down Posts: 490 Trader Rating: (10) Feedback Score: 10 reviews	s13 parts for sale I cleaned my garage out last weekend and found some parts laying around. Before I junk them I decided to see if anyone needs anything. Make offers on anything because this stuff is no good to me. Tension Rod Brackets (driver and passenger) $20 shipped each Automatic Brake Pedal $15 Complete KA24DE tranny without 5th gear due to a bad synchro. Four gear was starting to go as well, but would still hold. I'm willing to part it out specifically or sell it as a whole to get rebuilt which usually is around ~$250. Just make offers on parts or the whole thing. Shifter trim $20 Clutch Dampening Device $10 shipped KA24DE Ignition coil $25 shipped SR20 AIV Assembly $25 SR20 A/C Compressor $35 SR20 Coilpack over "INTERCOOLER TURBO" $25

01-03-2009, 04:35 PM	#4
superbraut Leaky Injector Join Date: Dec 2008 Location: - Posts: 99 Trader Rating: (6) Feedback Score: 6 reviews	deleting . deleting . Last edited by superbraut; 06-18-2020 at 09:04 PM.. Reason: deleting .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-03-2009, 09:09 AM	#2
lightsource Zilvia FREAK! Join Date: Jul 2008 Location: Compton, CA Posts: 1,153 Trader Rating: (41) Feedback Score: 41 reviews	The SR AC Compressor, how well does it work and do I need any additional hardwares to install it?

01-03-2009, 10:01 AM	#3
duballstar37 Zilvia Junkie Join Date: Aug 2007 Location: Eastbound and Down Posts: 490 Trader Rating: (10) Feedback Score: 10 reviews	It came off my working SR motor before I installed it so I would assume it is working just like the motor. As long as you have the existing bracket on the motor it will bolt right up without any other hardware.

01-03-2009, 08:42 PM	#5
duballstar37 Zilvia Junkie Join Date: Aug 2007 Location: Eastbound and Down Posts: 490 Trader Rating: (10) Feedback Score: 10 reviews	Nope came from my auto. Its actually very clean.

02-17-2009, 11:32 AM	#6
duballstar37 Zilvia Junkie Join Date: Aug 2007 Location: Eastbound and Down Posts: 490 Trader Rating: (10) Feedback Score: 10 reviews	Bump to the tizzy

03-09-2009, 11:16 PM	#7
Yuda Zilvia Junkie Join Date: Nov 2007 Location: Milwaukee Posts: 308 Trader Rating: (20) Feedback Score: 20 reviews	pm sent for the brackets

03-18-2009, 12:00 AM	#8
duballstar37 Zilvia Junkie Join Date: Aug 2007 Location: Eastbound and Down Posts: 490 Trader Rating: (10) Feedback Score: 10 reviews	Tension rod brackets sold to Yuda. I have a q45 throttle body for sale also.

03-31-2009, 05:16 PM	#9
duballstar37 Zilvia Junkie Join Date: Aug 2007 Location: Eastbound and Down Posts: 490 Trader Rating: (10) Feedback Score: 10 reviews	Anyone want this stuff before I trash it?