KA24DE Swap Question.... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

IES13 · 08-07-2005, 12:42 PM

Ok after some searching I think I got it. Currently I have a KA24E and one hand I have a 1993 KA24DE Harness and a 1992 ECU OBDI and a 1995 KA24DE engine. If I understand right I can swap out my KA24E and use the 93 KA24DE harness and 93 ECU and 95 KA24DE engine together with my old tranny from the KA24E? I'm I I right?

Thanks.......

**Phlip** · 08-07-2005, 12:56 PM

Wade through the bullshit in this thread for your answer on the transmission question:
#/f/showthread.php?t=83423
... and look here for any question you may have for the engine swap:
#/f/showthread.php?t=33502

aznpoopy · 08-07-2005, 12:59 PM

thats a good question.

should be easy to check though.

get the harness out, go to the engine. start plugging things in and see if any plugs don't fit. early 95s are obdi and later 95s are obdii. in particular the plugs for the two sensors located on the coolant passage by the air bleeder screw may not work. the distributor plug may be different as well. i forget what else.

so yeah, go out to your garage and start plugging shit in to see if it all fits or not.

i dont know about the tranny. i *think* i remember reading that the sohc tranny does not work, but i'm not sure.

jim1234664 · 08-07-2005, 05:57 PM

sohc tranny works for any KA

08-07-2005, 12:42 PM	#1
IES13 Zilvia Member Join Date: Jul 2005 Location: IE Posts: 246 Trader Rating: (5) Feedback Score: 5 reviews	KA24DE Swap Question.... Ok after some searching I think I got it. Currently I have a KA24E and one hand I have a 1993 KA24DE Harness and a 1992 ECU OBDI and a 1995 KA24DE engine. If I understand right I can swap out my KA24E and use the 93 KA24DE harness and 93 ECU and 95 KA24DE engine together with my old tranny from the KA24E? I'm I I right? Thanks.......

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-07-2005, 12:59 PM	#3
aznpoopy Post Whore! Join Date: Mar 2003 Location: New Jersey Age: 40 Posts: 5,013 Trader Rating: (1) Feedback Score: 1 reviews	thats a good question. should be easy to check though. get the harness out, go to the engine. start plugging things in and see if any plugs don't fit. early 95s are obdi and later 95s are obdii. in particular the plugs for the two sensors located on the coolant passage by the air bleeder screw may not work. the distributor plug may be different as well. i forget what else. so yeah, go out to your garage and start plugging shit in to see if it all fits or not. i dont know about the tranny. i think i remember reading that the sohc tranny does not work, but i'm not sure.

08-07-2005, 05:57 PM	#4
jim1234664 Zilvia Member Join Date: Nov 2004 Location: Buffalo, NY Posts: 227 Trader Rating: (1) Feedback Score: 1 reviews	sohc tranny works for any KA