morpheus8486

I just won an auction on ebay for a set of some used DSM fuel injectors for my future KA-T set up. Along with a top feed fuel rail I would need 10ohm resistors to make them high impedance correct? Would I splice those directly in line with the injector wires? Or is there another option? Also, will I need to get DSM injector plugs/clips or anything such as these or will I be able to modify the stock plugs if they don't fit? And, are there any other random parts that I'll need to make them work? Thanks alot.

Zach

__________________
'91 240sx Fastback SuperHicas
My Car Domain Page

Maeda

Splice the resistors directly into the injector wires. They're SUPER cheap at radio shack.

IM me for more info.

__________________

mbmbmb23

You'll need a top feel fuel rail also....and you'll need to probably use KA O-rings.

__________________
400x200

Maeda

I think he covered that.

and you do need to use the KA O-rings for sure.

__________________

morpheus8486

Cool, thanks for the help. Does anyone know if I'm going to have to splice some DSM injector plugs or will I somehow be able to use the stock ones? Seems kinda obvious that I would need DSM plugs, but may as well double check.

__________________
'91 240sx Fastback SuperHicas
My Car Domain Page

Maeda

Splice the dsm ones.

Becareful putting the resistors inline because they break very easily....

I JUST finished rewiring my harness to accomidate another plug that runs to a resistor box I made that goes to the injectors to prevent this breakage....

I'll post up some pics later if you want them.

__________________

morpheus8486

Yeah, that would be great if you could post some pics of that. Thanks for the help.

__________________
'91 240sx Fastback SuperHicas
My Car Domain Page

Maeda

Yah NP,
It'd probably be better if you contacted me via aim for the specifics and what not.

I'll probably do it tomarrow... (G/f's parents are visitng and my house looks like it got hit by a beer tornado.)

__________________