Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 07-21-2011, 02:45 PM   #1
1Lazy40
 
Join Date: Feb 2011
Location: virginia
Age: 30
Posts: 5
Trader Rating: (0)
1Lazy40 is an unknown quantity at this point
Feedback Score: 0 reviews
240sx wont start

Hello zilvia my name is torey i have had my 91 240sx super hicas for about a year now, with onl1 1 prob it would smoke a little from time to time and that it would run funny after inwould drive it fast. It would idle funny and sound like a wrx, i think it was an injector prob, but other then that it would drive fine , but the other night after driving it for about 20 min , and then turning it off , it wouldent trun back on , it starts and runs fror about 2 sec then shuts off, i looked over my fuses and i noticed my fuel pump fuse was blown so i replaced it , but still had the same prob , i then removed the fuel pume it self it looked ok, i wired it to the battery to it seem to be working fine , i have no idea why it wont run , anyone else had this prob or know what it could be ?
1Lazy40 is offline   Reply With Quote
Sponsored Links
Old 07-21-2011, 03:08 PM   #2
ssptc06
 
Join Date: Apr 2011
Location: Newbury Park, CA
Age: 34
Posts: 6
Trader Rating: (0)
ssptc06 is an unknown quantity at this point
Feedback Score: 0 reviews
Pinched fuel line? Possibly clogged injectors. I would pull out the injectors and make sure that there isn't any build up that may be blocking them.
ssptc06 is offline   Reply With Quote
Old 07-21-2011, 03:13 PM   #3
1Lazy40
 
Join Date: Feb 2011
Location: virginia
Age: 30
Posts: 5
Trader Rating: (0)
1Lazy40 is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by ssptc06 View Post
Pinched fuel line? Possibly clogged injectors. I would pull out the injectors and make sure that there isn't any build up that may be blocking them.
Ill look and see how the lines are , and when i try to give it gas while its on for the 2sec it does not seem like its getting gas
1Lazy40 is offline   Reply With Quote
Old 07-21-2011, 03:15 PM   #4
murffy
Zilvia Junkie
 
murffy's Avatar
 
Join Date: Apr 2008
Location: Orange county
Age: 32
Posts: 585
Trader Rating: (44)
murffy is an unknown quantity at this point
Feedback Score: 44 reviews
check your fuel pump grounds, one in the trunk right under the latch, and check the ground above your fuse box inside the engine bay on the left strut tower
murffy is offline   Reply With Quote
Old 07-21-2011, 03:27 PM   #5
Driftius_Maximus
 
Driftius_Maximus's Avatar
 
Join Date: Jul 2011
Location: Claremore, Ok
Posts: 24
Trader Rating: (0)
Driftius_Maximus is an unknown quantity at this point
Feedback Score: 0 reviews
My buddy had the same problem. Took me awhile to figure out but it ended up be bad injectors o rings causing the car to flood itself out which kept it from starting. Replaced all the o rings and now runs great.
__________________
www.facebook.com/drift.militia
Driftius_Maximus is offline   Reply With Quote
Old 07-21-2011, 03:40 PM   #6
1Lazy40
 
Join Date: Feb 2011
Location: virginia
Age: 30
Posts: 5
Trader Rating: (0)
1Lazy40 is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by Driftius_Maximus View Post
My buddy had the same problem. Took me awhile to figure out but it ended up be bad injectors o rings causing the car to flood itself out which kept it from starting. Replaced all the o rings and now runs great.
Ok , i replaced injector 3 with a injector from a maxima ka is that ok to do or are they diff is some way ?
1Lazy40 is offline   Reply With Quote
Old 07-21-2011, 03:41 PM   #7
1Lazy40
 
Join Date: Feb 2011
Location: virginia
Age: 30
Posts: 5
Trader Rating: (0)
1Lazy40 is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by 1Lazy40 View Post
Ok , i replaced injector 3 with a injector from a maxima ka is that ok to do or are they diff is some way ?
Ill replace them all tomorrow
1Lazy40 is offline   Reply With Quote
Old 07-21-2011, 03:50 PM   #8
hardtime21
Zilvia Member
 
Join Date: Mar 2010
Location: M-Town
Age: 42
Posts: 249
Trader Rating: (19)
hardtime21 is an unknown quantity at this point
Feedback Score: 19 reviews
Have you checked your fuel filter yet? It could be clogged forcing back pressure to blow the fuse on the pump. Replace your injectors but check your fuel lines both feed and return.
hardtime21 is offline   Reply With Quote
Old 07-21-2011, 03:50 PM   #9
Driftius_Maximus
 
Driftius_Maximus's Avatar
 
Join Date: Jul 2011
Location: Claremore, Ok
Posts: 24
Trader Rating: (0)
Driftius_Maximus is an unknown quantity at this point
Feedback Score: 0 reviews
They should be the same. Just make sure you replace all o rings when you have them out.
__________________
www.facebook.com/drift.militia
Driftius_Maximus is offline   Reply With Quote
Old 07-24-2011, 08:44 AM   #10
1Lazy40
 
Join Date: Feb 2011
Location: virginia
Age: 30
Posts: 5
Trader Rating: (0)
1Lazy40 is an unknown quantity at this point
Feedback Score: 0 reviews
Just changed the injectors this morning with new o rings, and it started right up good as new , o and i replaced the fuel filter (z32) like u said hardtime21 when i took it out thick black stuff came out of it, i bet that was the main prob , but yep my 240 is good as new thanx guys
1Lazy40 is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 02:02 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™