Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 03-08-2010, 11:51 AM   #1
Frankyy
Leaky Injector
 
Frankyy's Avatar
 
Join Date: Feb 2010
Location: Ottawa/ON
Posts: 60
Trader Rating: (1)
Frankyy is an unknown quantity at this point
Feedback Score: 1 reviews
sr turns but no spark

so 1 afternoon backed up the car into the garage

took out the ac pump and welded around my tow hooks, but forgot to disconect the battery terminals,

so tried to start it up turns, everything lights up , fuses are all fine, but no spark at the plug

I sourced it down to the coil packs, i get power to the coils but no spark after the coils to the sparkplug

I was wondering if anybody knows what other USDM car uses sr20 coil packs, or if anybody has some for sale...
Frankyy is offline   Reply With Quote
Sponsored Links
Old 03-08-2010, 12:14 PM   #2
army240
Zilvia Junkie
 
army240's Avatar
 
Join Date: May 2008
Location: Quebec
Age: 36
Posts: 306
Trader Rating: (1)
army240 is an unknown quantity at this point
Feedback Score: 1 reviews
Pretty sure you fried your igniter more than all 4 coil packs

Frank
army240 is offline   Reply With Quote
Old 03-08-2010, 12:16 PM   #3
SoguRacing
Post Whore!
 
SoguRacing's Avatar
 
Join Date: Nov 2007
Location: (714)
Age: 35
Posts: 2,967
Trader Rating: (23)
SoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfection
Feedback Score: 23 reviews
Send a message via AIM to SoguRacing
perhaps that..or maybe your ecu.
__________________
Pre Tune Checkup! Compression,LeakDown,Vacuum Test $80. Cams Install: $180
SoguRacing is offline   Reply With Quote
Old 03-08-2010, 12:29 PM   #4
Frankyy
Leaky Injector
 
Frankyy's Avatar
 
Join Date: Feb 2010
Location: Ottawa/ON
Posts: 60
Trader Rating: (1)
Frankyy is an unknown quantity at this point
Feedback Score: 1 reviews
fried igniter would start dieying and miss fire when the car gets warm that's what I was told

It ran on 2 pistons for a few seconds unplugged injector number 1 and 2 no change, 3 and 4 car would die, but injectors are functionning the spark plug was flooded when i checked it afterwards so seemed to me like coil 1 and 2 were done, and now 3 and 4 let go the next morning.
Frankyy is offline   Reply With Quote
Old 03-08-2010, 12:42 PM   #5
805-240
Zilvia Member
 
805-240's Avatar
 
Join Date: Dec 2007
Location: Oxnard
Age: 31
Posts: 191
Trader Rating: (1)
805-240 is close to perfection805-240 is close to perfection805-240 is close to perfection805-240 is close to perfection805-240 is close to perfection805-240 is close to perfection805-240 is close to perfection805-240 is close to perfection805-240 is close to perfection805-240 is close to perfection805-240 is close to perfection
Feedback Score: 1 reviews
Its the ecu it happened to me
805-240 is offline   Reply With Quote
Old 03-08-2010, 12:53 PM   #6
Frankyy
Leaky Injector
 
Frankyy's Avatar
 
Join Date: Feb 2010
Location: Ottawa/ON
Posts: 60
Trader Rating: (1)
Frankyy is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by 805-240 View Post
Its the ecu it happened to me
alright i jsut finished ordering some coil packs, anyways I have a PFC djetro ecu here, just not too sure where the IAT sensor connects on the harness, so I'll make another thread
Frankyy is offline   Reply With Quote
Old 03-08-2010, 03:34 PM   #7
Frankyy
Leaky Injector
 
Frankyy's Avatar
 
Join Date: Feb 2010
Location: Ottawa/ON
Posts: 60
Trader Rating: (1)
Frankyy is an unknown quantity at this point
Feedback Score: 1 reviews
botom clip for the igniter chip was broken, and was barely off, still held in place but not enough for all the wires to touch,


... Problem fixed, thanks everyone!

Last edited by Frankyy; 03-08-2010 at 05:19 PM..
Frankyy is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:34 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™