ManoNegra

So, we're getting ready to make more of these guys since I get asked for them regularly.



one of the things we were asked on more than a few occasions last time we made them
was why we put 8AN size fittings on the blocks as opposed to the more popular 10AN?

the reason was twofold:
- first, there really isn't a need to, everybody we talked to didn't see a need for a larger size and increased flow.

- the second has to do with design restrictions; the proximity of the the oil inlet and outlet holes makes it impossible to put 10AN fittings
next to each other and still have the required clearance to be able to thread them in and out.

Well, we think we have a solution.
We can do away with the fittings and mill the 10AN fitting heads directly to the top of the oil block thereby getting around the design restriction.

Would you guys prefer that over the current version?
The drawback: it's a more intricate design that will make the oil blocks more expensive to make. We figure we would ask $160 for them paypaled and shipped.

Here's your opportunity to provide us with feedback and get the parts you want made the way you want them.