S13project

Went out to VA for groceries. Figured they might have something a bit different than what I'm used to in Atlanta.

Didnt really find anything all that different but I did come home with this


Immediately got to work on the lesser seen parts






Turned my attention to the areas I would see day in and day out walking past it or getting in for a drive











Then I just went full idiot








Least the engine bay paint came out all sparkles



In the middle of building an S14 SR to toss in with a few fun bits, then fresh TH1 paint with a couple other exterior parts and I can hopefully be back to enjoying it again.

__________________

Krusty_s13

I would do dirty things for that hood!

Excited for the rest of the build. Looks great!

__________________

tuzzio

Car definitely has some cool bits.

Also, sup with the fortune autos? ha

Thursday7

That column TT holder, I see you.

__________________
WTB SR20 *Non-Rep* Bottom Mount Manifold
WTB Bride Zieg II

tuzzio

Open them eyes and you'll see its a blitz TT / boost gauge!

PoorMans180SX

Very cool and clean build, Looking forward the the end result.

__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.

d_nice

Wow so far nothing here is wrong. Looks good and cant wait for your outcome.

EFITTZY

Glad you made a build thread for this beauty! In for updates

__________________
(づ｡◕‿‿◕｡)づ T E A M B L O O M

Eddiemac

This is the most beautiful thing I've ever seen.

S13project

Honestly lightest hood I've ever picked up. Aramid fiber is no joke. Feels more like fabric than a fiber......definitely a real pain to drill/cut cleanly. Found that out when installing Quik Latch hood pins.

Another hood pic for the hell of it


I sold one set I had, but not sure if it was these or the aircup versions that I had. Will check to make sure.


Damn, you know you're old school Blitz bits

Same! Currently putting together an S14 SR20. Glad I didn't just drop it in and go. Opted to refresh pumps and check over the motor. Was hopeful that would be it, but went south after finding out it had crank walk. Seems previous owner either slapped it together in a rush foregoing the torque specs....or simply forgot the thrust washer cause we never found it. Cant imagine it was entirely eaten up. Oh well.....had to open the cylinders so.....HKS 87mm pistons (hate they don't make 86.5mm). HKS step one valvetrain. And a fancy GTIII RS spinner. Motor already had the old step one cams thus why I'm sticking with mostly HKS bits. Am pretty sure it will clear 300whp, so will be dealing with drivetrain as well soon enough.

Mmmmmmm packaging


Thanks man! Figured it was time (since the S14 continues to be my forever project)

__________________

da_crew10

Damn this build is getting cooler and cooler!

__________________

Krusty_s13

Who is producing that aramid fiber hood?

__________________

S13project

Behrman Technora

__________________

gbaby2089

Is the final ride height going to be a lot lot lot lot better than in the OP?

Krusty_s13

Ah yeah, Behrman. The fitment is spot on!

__________________

TheRealSy90

What's the deal with the HKS packaged rocker arms? Are they just standard Nissan rockers?

EDIT: Sorry I looked them up, appears to be standard Nissan rockers with some sort of vague coating that HKS has applied. Couldn't find any other info.

__________________

S13project

Yea wish they said more about whatever they did or didnt do to the oem rockers.

Changing up the wheels. Promodas will be fronts 17x9+18 very glad a friend decided to sell these.

Advan RG1s will get stripped and redone in white and become rears 17x9.5+22


And the shiny 87mm HKS piston set

__________________

S13project

Always little things that cause long hold ups. Like waiting on this guy


Thought the trans was in good shape....turns out not so much. Synchros were a bit worn and one of the needle bearings had gone bad. Glad to catch it now, but still puts a hold up on the build. Finally going to try out the OS Giken close ration setup. If math is correct it shouldn't be screaming during daily highway cruise and will have ability to hold up to the torque levels I think the motor will be making.


Wont be sitting like this much longer

__________________

S14rebuild

Nothing beats, super clean builds and attention to detail...this does not disappoint! Looks sweet

s1421

In for more updates on this one!!

S13project

Made a simple battery tray for smaller than factory battery (Miata specific). This was just test version. Gotta make a couple little changes and then it will be good to go and off to powdercoat.

__________________

Thursday7

That's a cute tire sticker ball.

__________________
WTB SR20 *Non-Rep* Bottom Mount Manifold
WTB Bride Zieg II

S13project

Hahahaha. Yea it's still just cute. Never would've guessed how long it takes to build one and how many shipping companies put their label on top of the tire sticker...bastards.

__________________

ripnbst

This thing looks quality through and through. Nice to see someone not going Ebay everything on an S-Chassis build. Keep up the fine work sir!

__________________
In the market for a Clean Coupe

S13project

Did the budget build once before, it was best choice for my wallet and for buying tires constantly. Eventually I replaced all the ebay and beat up used parts with proper parts. Learning process, right.

After buying the Silvia, I wanted to build it the way I dreamed of building my first S13 with all the parts I drooled over back then. Somewhat of a benefit as I've found some really cool parts I had no idea existed back then.

Finally got around to refreshing the Promoda wheels I bought from a friend

__________________

S13project

Finally put a wrench to this car again...

Anti Gravity battery is smaller than Miata battery and weighs like 15lbs. So wild. Thankfully the Blitz battery tie down still fits rather well.


Motor is finally in! Still have a lot to do before startup but am glad to start moving forward again.

__________________

Thursday7

Is that a GP Sports fan blade I see?

__________________
WTB SR20 *Non-Rep* Bottom Mount Manifold
WTB Bride Zieg II

S14rebuild

ohhh lookn..SPICY!!!

PoorMans180SX

Very cool stuff, HKS all the things, hah. What is the firewall covering? Who made your turbo manifold?

__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.

S13project

Spot on spotting!
Thanks man! Definitely taking longer than I had planned but will get there at some point.
Have dreamed of HKS all the things since I started messing with 240s. Very happy to finally be fulfilling my younger me dreams. Hahaha.

The firewall has HeatShield Products Lava Shield heat barrier on it. The 0.008 is much easier to get smooth over all the bumps and corners on the schassis firewall. The turbo manifold is Sinco Customs. Can?t wait to hear everything scream at 7k.

Hopefully won?t be 3-4 months before I get more done. Waiting on the trans build to get finished up along with a handful of other things before I can start getting ready for the dyno.

__________________