UcanTry

I have acouple questions about removing a Auto trany form a sr. I removed all the bolts in the bell housing, but do I need to remove the torque converter? Also to remove the pilot bushing from the auto trany do I need a special tool? Thanks for any help.

__________________

Sileighty_85

What are you trying to do?
5 sp swap?

If so then yes you have to remove the tourqe converter and get a flywheel and clutch kit for the 5 speed.

and Yes the Piolt bearing is differnt so you have to change that out and easy trick is to back the inside of the P/B and find a meatal rod or something to the closet inside diameter of the bearing and push it through it

__________________
後輪駆動車１番
1989 Built SR GT2871R -363whp
1998 S14 W/RB25- 250ish (For Now)
1986 SR86 - 200ish
1990 R32 GTR - 320hp
Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html
Don't Buy XS-Power or SSAC Shit

UcanTry

Im tring to remove a auto trany, I already have the manual trany with the clutch flywheel etc.....but im just tring to get the auto off the motor.....

i did talk to someone locally and they said the torque converter comes off with the trany and i did not need a special tool to remove the pilot bushing, so i guess we will see

__________________

koukimonster139

yea theres an adapter for the pilot bushing for autos that manual doesnt use

you will more than likely need a special tool which can be rented from autozone

__________________
ho ha ho chi chi

UcanTry

yea i just found that out, i called autozone its 30.00 to rent it......thanks for your help man

__________________

Pblesh85

I JUST did the same swap you are doing.

To remove the tranny there are bolts that hold the torque converter to the flex plate(5 or 6). Do you know how to remove them ?

I have a few tips if you want, just pm me if you hit a speed bump.

__________________

Do you suffer from vaginal dryness...