Regal_Six707

hello all! i had an idea to put these wiseco forged pistons for a dual cam into a single cam. i have searched around and have only found info about swapping single cam pistons into dual cam motors to raise the compression. the piston specs are 89.5 bore and 9.0:1 compression ratio. how would this affect the compression ratio in a single cam motor? if this is a possibility i would go turbo.
my car is an 89. not sure if it is 8.6:1 or 9.1:1. i can check manufacture date next time i drive it. any feedback on this is appreciated!

kyral

they drop the compression ratio and they fit (i heard its like 7 to 1)

__________________
The Game
you lose haha

Regal_Six707

interesting. do you think that c/r is too low for a turbo build say around 300-400hp?

pacotaco345

A 7:1 CR motor would be the laziest thing you'd ever drive in your life. Why not just put single cam pistons in it and run 9:1 comp? With a good tune that's not dangerous or anything, even on 91..

__________________

Regal_Six707

gotchya. i was curious about it because i already have the pistons for a dual cam but decided to go another route and build up a single cam. i will just list them for sale online and get single cam pistons. appreciate the responses guys. thanks a bunch!!

EnnEssEnnKAT

How much for the Pistons? I need some!


Sent from my iPad using Tapatalk

Regal_Six707

i will ship them for 500. i bought them on enjuku. https://www.enjukuracing.com/product...4de-91-98.html
89.5 so .5 over stock and 9:1 comp. came out to about 600 including tax and shipping. lmk if you want them!