'89 s13 coupe - Help, electrical help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Foolish_Foley · 09-01-2012, 01:41 AM

OK so i swapped my single cam from my hatch to my new '89 coupe shell that originally came with a single in i I hook everything up right, go to check for power and all i hhave is tail lights, headlights, interior lights, the annoying chime and hazards

I'm not getting anything else,

I checked the fuse panel, I have power to the whole right side of the box but not anything that is on tthe left, so all the ACC stuff ..

I used a light voltage tester and i have nno power to the ignition

Fuel pump isnt even kicking on

Changed the TCU out from the one iin the hatch and switched ignitions

Still nothing

Anybody have any ideas??

Eramo323 · 09-02-2012, 03:27 PM

you check all of your connections? make sure everything is plugged in... is the harness running along the drivers side fender rubbed on ?

booey13 · 09-02-2012, 03:31 PM

Did you swap harnesses as well?

blessedhellrider · 09-02-2012, 03:54 PM

i had a problem with my 89 . dont remember what relay but i had to ground one . the bad thing ,it (realay)would stay on .so i added an adtional realy to trigger the ground.

09-01-2012, 01:41 AM	#1
Foolish_Foley Join Date: Sep 2012 Location: puyallup Age: 33 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	'89 s13 coupe - Help, electrical help OK so i swapped my single cam from my hatch to my new '89 coupe shell that originally came with a single in i I hook everything up right, go to check for power and all i hhave is tail lights, headlights, interior lights, the annoying chime and hazards I'm not getting anything else, I checked the fuse panel, I have power to the whole right side of the box but not anything that is on tthe left, so all the ACC stuff .. I used a light voltage tester and i have nno power to the ignition Fuel pump isnt even kicking on Changed the TCU out from the one iin the hatch and switched ignitions Still nothing Anybody have any ideas??

09-02-2012, 03:31 PM	#3
booey13 Zilvia FREAK! Join Date: Sep 2009 Location: Midwest Age: 31 Posts: 1,401 Trader Rating: (91) Feedback Score: 91 reviews	Did you swap harnesses as well? __________________ www.monkeyboysyo.blogspot.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-02-2012, 03:27 PM	#2
Eramo323 Zilvia Addict Join Date: Jun 2010 Location: NORTH EAST LOS ANGELES Age: 32 Posts: 764 Trader Rating: (22) Feedback Score: 22 reviews	you check all of your connections? make sure everything is plugged in... is the harness running along the drivers side fender rubbed on ?

09-02-2012, 03:54 PM	#4
blessedhellrider Zilvia Member Join Date: Jan 2012 Location: tampaish Age: 39 Posts: 277 Trader Rating: (0) Feedback Score: 0 reviews	i had a problem with my 89 . dont remember what relay but i had to ground one . the bad thing ,it (realay)would stay on .so i added an adtional realy to trigger the ground.