Wire tuck question about fuse types - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

240Zfunahollic · 10-25-2010, 09:36 PM

I'm in the middle of the initial tear down and planning process on my wire tuck in my s13. My question is about the 5 fusible links that Nissan uses instead of standard blade fuses. Why did Nissan use these and do the serve a different purpose than a blade fuse? I am tucking the harness under the dash. My plan is to use in-line blade fuse holders to save as much room as possible and because they wont limit my routing/mounting. So ultimately my question is can i use a blade fuse in place of the FL's?

Nismo180 · 10-25-2010, 09:47 PM

Got a picture available of what you are referring to specifically? Even better a wiring diagram? All I can recall off the top of my head are blade type fuses and relays.

Shot in the dark answer: If the "fusible links" you are referring to only have one wire going in and out you'll probably be okay as long as the fuses have the same rating as what you are throwing out.

240Zfunahollic · 10-25-2010, 10:20 PM

no pictures off hand. my car is at a friends house so ill have to get there to take a picture. and i had your thoughts on keeping the amperage rating the same and using a blade fuse.

WangonwWarrior · 10-25-2010, 10:36 PM

Once you take them out of the plastic holder they do not take up much room.

10-25-2010, 09:36 PM	#1
240Zfunahollic Zilvia Junkie Join Date: Aug 2003 Location: South Carolina Age: 35 Posts: 593 Trader Rating: (35) Feedback Score: 35 reviews	Wire tuck question about fuse types I'm in the middle of the initial tear down and planning process on my wire tuck in my s13. My question is about the 5 fusible links that Nissan uses instead of standard blade fuses. Why did Nissan use these and do the serve a different purpose than a blade fuse? I am tucking the harness under the dash. My plan is to use in-line blade fuse holders to save as much room as possible and because they wont limit my routing/mounting. So ultimately my question is can i use a blade fuse in place of the FL's? __________________ Visit My Trader rating page http://zilvia.net/f/traderratings.html?u=15347

10-25-2010, 09:47 PM	#2
Nismo180 Leaky Injector Join Date: Jan 2005 Location: Bonney Lake, WA Posts: 105 Trader Rating: (0) Feedback Score: 0 reviews	Got a picture available of what you are referring to specifically? Even better a wiring diagram? All I can recall off the top of my head are blade type fuses and relays. Shot in the dark answer: If the "fusible links" you are referring to only have one wire going in and out you'll probably be okay as long as the fuses have the same rating as what you are throwing out. __________________ Hellafunctional

10-25-2010, 10:20 PM	#3
240Zfunahollic Zilvia Junkie Join Date: Aug 2003 Location: South Carolina Age: 35 Posts: 593 Trader Rating: (35) Feedback Score: 35 reviews	no pictures off hand. my car is at a friends house so ill have to get there to take a picture. and i had your thoughts on keeping the amperage rating the same and using a blade fuse. __________________ Visit My Trader rating page http://zilvia.net/f/traderratings.html?u=15347

10-25-2010, 10:36 PM	#4
WangonwWarrior Zilvia FREAK! Join Date: Jan 2008 Location: Amerika24 alabama: Where if your not first..... your last Posts: 1,163 Trader Rating: (15) Feedback Score: 15 reviews	Once you take them out of the plastic holder they do not take up much room. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode