240sx ka24e to de swap - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

liltune13 · 07-26-2011, 06:58 PM

Ok so I have a '89 240sx and im in the final stages of the swap. Engine from a 95 (obdI) and tranny are in, I got a s13 DOHC harness with ecu, manifold and throttle body and the distributor. (got the parts some off ebay and some off users here)

When I try to start the car I can hear the fuel pump priming, believe the throttle is opening but their is no spark.
car does have an 1/8 of gas in it, anybody thing that might be the problem?

I checked the fuses they are all good, I am kinda curious ,maybe I bought a bad dizzy so tomorrow gonna swap dizzys from a running 240 and see what happens

other than that
I am all outta ideas please lemme know what you guys thinkk

spyderplayer2002 · 07-27-2011, 12:00 PM

i had the same problem with a swap i did with a bubby on his car a few years ago still to this day i could not remember what went wrong

liltune13 · 07-27-2011, 12:05 PM

lol dont say that shit! you'll jynx me sir!

theboy · 07-27-2011, 12:26 PM

How do you know you have no spark? Did you pull a plug and ground it to the motor? Spark tester?
Do you have all the grounds hooked up?
Did you check the ecu for codes?
Do you have the correct s13 coil/ignition module?
Is the timing correct?
Is your dizzy getting/sending a signal?
is the coil bad?
Are the injectors firing?
Do you have the correct s13 ecu for the s13 harness?

There are soooooo many thinks that could be at play here. So your going to have to be way more specific on what you have done so far.

liltune13 · 07-29-2011, 11:15 AM

Thanks dude I will check all that stuff out
currently the clip on my ignition coil (93) I got doesn't work on my car but my harness is for a 93 so it doesnt, make sense. I look at the ignition coils for a 95 and the clip on them look just like the 93

h11m1vn · 07-29-2011, 11:31 AM

Definitely check all of your grounds

07-26-2011, 06:58 PM	#1
liltune13 Leaky Injector Join Date: Jun 2011 Location: United States Age: 31 Posts: 67 Trader Rating: (3) Feedback Score: 3 reviews	240sx ka24e to de swap Ok so I have a '89 240sx and im in the final stages of the swap. Engine from a 95 (obdI) and tranny are in, I got a s13 DOHC harness with ecu, manifold and throttle body and the distributor. (got the parts some off ebay and some off users here) When I try to start the car I can hear the fuel pump priming, believe the throttle is opening but their is no spark. car does have an 1/8 of gas in it, anybody thing that might be the problem? I checked the fuses they are all good, I am kinda curious ,maybe I bought a bad dizzy so tomorrow gonna swap dizzys from a running 240 and see what happens other than that I am all outta ideas please lemme know what you guys thinkk

07-27-2011, 12:00 PM	#2
spyderplayer2002 Join Date: Aug 2005 Location: Memphis, Tn Age: 33 Posts: 30 Trader Rating: (0) Feedback Score: 0 reviews	i had the same problem with a swap i did with a bubby on his car a few years ago still to this day i could not remember what went wrong __________________ -89 240sx "beater drift car" welded diff -06 evo ix - for sale

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-27-2011, 12:05 PM	#3
liltune13 Leaky Injector Join Date: Jun 2011 Location: United States Age: 31 Posts: 67 Trader Rating: (3) Feedback Score: 3 reviews	lol dont say that shit! you'll jynx me sir!

07-27-2011, 12:26 PM	#4
theboy Zilvia Addict Join Date: Apr 2010 Location: Chicago Age: 32 Posts: 618 Trader Rating: (10) Feedback Score: 10 reviews	How do you know you have no spark? Did you pull a plug and ground it to the motor? Spark tester? Do you have all the grounds hooked up? Did you check the ecu for codes? Do you have the correct s13 coil/ignition module? Is the timing correct? Is your dizzy getting/sending a signal? is the coil bad? Are the injectors firing? Do you have the correct s13 ecu for the s13 harness? There are soooooo many thinks that could be at play here. So your going to have to be way more specific on what you have done so far.

07-29-2011, 11:15 AM	#5
liltune13 Leaky Injector Join Date: Jun 2011 Location: United States Age: 31 Posts: 67 Trader Rating: (3) Feedback Score: 3 reviews	Thanks dude I will check all that stuff out currently the clip on my ignition coil (93) I got doesn't work on my car but my harness is for a 93 so it doesnt, make sense. I look at the ignition coils for a 95 and the clip on them look just like the 93

07-29-2011, 11:31 AM	#6
h11m1vn Leaky Injector Join Date: Oct 2010 Location: AR Age: 30 Posts: 81 Trader Rating: (9) Feedback Score: 9 reviews	Definitely check all of your grounds