Wilwood/350Z Track Edition BBK - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

addicted2sp33d · 04-22-2014, 01:10 PM

Hi Zilvia,

Wanted to see if I could find 4 other S-Chassis owners to go into a group buy with me on a Wilwood/350Z Track Edition Rotor Kit.

For this prototype group the price will be $785.00, must be paid up front. If we can't get 5-prototype buyers together, we might not be able to do this.

Kit will be a bolt-on kit:

2x Wilwood Superlite Calipers (Wilwood Part 120-11128)
4x BP-10 Wilwood Pads
2x 350Z Track Edition Rotor, 4 or 5 lug, drilled and/or slotted (328mm)
2x Custom Mounting Brackets to properly place the Wilwood Caliper/Pad on the rotor.
2x Custom Braided Lines with fittings
All Hardware (bolts, washers, etc.) needed for installation

The custom brackets and braided lines will be manufactured by Silvermine Motors; it is basically their standard 350Z Rotor kit, Click Here. except with a Wilwood Caliper instead of a Z32 caliper, and different mounting brackets.

I'll keep track of interest here. They won't need funds until we decide to move forward with this, but the key is we need to get at least 4-more prototype buyers.

1. addicted2sp33d
2.
3.
4.
5.

Thanks for looking!

04-22-2014, 01:10 PM	#1
addicted2sp33d Leaky Injector Join Date: Feb 2003 Location: 2 Seconds ahead with 1 turn to checker. Posts: 102 Trader Rating: (0) Feedback Score: 0 reviews	Wilwood/350Z Track Edition BBK Hi Zilvia, Wanted to see if I could find 4 other S-Chassis owners to go into a group buy with me on a Wilwood/350Z Track Edition Rotor Kit. For this prototype group the price will be $785.00, must be paid up front. If we can't get 5-prototype buyers together, we might not be able to do this. Kit will be a bolt-on kit: 2x Wilwood Superlite Calipers (Wilwood Part 120-11128) 4x BP-10 Wilwood Pads 2x 350Z Track Edition Rotor, 4 or 5 lug, drilled and/or slotted (328mm) 2x Custom Mounting Brackets to properly place the Wilwood Caliper/Pad on the rotor. 2x Custom Braided Lines with fittings All Hardware (bolts, washers, etc.) needed for installation The custom brackets and braided lines will be manufactured by Silvermine Motors; it is basically their standard 350Z Rotor kit, Click Here. except with a Wilwood Caliper instead of a Z32 caliper, and different mounting brackets. I'll keep track of interest here. They won't need funds until we decide to move forward with this, but the key is we need to get at least 4-more prototype buyers. 1. addicted2sp33d 2. 3. 4. 5. Thanks for looking! __________________ Shift_faster

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode