![]() |
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Zilvia Junkie
![]() |
Difference between 95 and 96 gas tank?
My fuel gauge stopped working and I've replaced the long plastic float tube with known working ones and it still doesn't work. I remember reading somewhere that the whole tank needs to be replaced as the real float is at the bottom side and not a replaceable.
Nissan makes two different gas tanks with different part numbers and prices for 95-96. Can anyone tell me what the difference is between the two? Thanks |
|
|
|
| Sponsored Links |
|
|
#3 |
|
Zilvia Junkie
![]() |
Cluster only has 70,000 original miles and the needle stays at full until 200 miles then drops slowly. I'm not sure if it's the cluster or tank. I would think the part soaked in fuel would fail first.
|
|
|
|
|
|
#4 |
|
Leaky Injector
![]() |
I have this same problem with fuel gauge not dropping until after 200ish mi. First occurred after going off-course at a drifting event in 2011. Never really looked into it since, though; just kinda got used to it. :x
Interested to hear any solutions that might be suggested in this thread. |
|
|
|
|
|
#6 |
|
Zilvia Addict
![]() Join Date: Jul 2013
Location: Georgia
Age: 32
Posts: 880
Trader Rating: (3)
![]() Feedback Score: 3 reviews
|
well i filled up my s14 (95 zenki SE) for the first time since i owned the car. Fuel gauge read full and now i have gone 65 miles and now my fuel reads dead on 3/4 of a tank...
so 65 miles= quarter tank of gas??! wtf stock ka24de and everything appears to working as it should.
__________________
95 S14 se RB25DET 348whp
|
|
|
|
|
|
#7 |
|
Man w/ CTSV & a Car Seat
![]() |
Tanks are the same, the long tube inside is the sender. Im just not 100% sure the plugs are the same for 95-96 vs 97-98 for the sender. If you've replaced the sender but the gauge still doesnt work, did you try swapping gauges?
As far as burning thru 3/4 of a tank, it could burn that if its in limp mode and burning excess gas. |
|
|
|
|
|
#9 |
|
Zilvia Junkie
![]() Join Date: Jun 2010
Location: Arizona/LA, California
Posts: 476
Trader Rating: (3)
![]() Feedback Score: 3 reviews
|
95 and 96 plugs in the outlets are different.
95 plug uses 3 pins while the 96 and up use 4 pins. As far as EGR being removed and all. I have no emission stuff at all and had amazing gas mileage. Was better than my Hyundai elantra... weirdly.
__________________
S14 KA NA two cylinders, 75whp limper |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|