Wilwood/350Z Track Edition BBK - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

addicted2sp33d · 04-22-2014, 01:10 PM

Hi Zilvia,

Wanted to see if I could find 4 other S-Chassis owners to go into a group buy with me on a Wilwood/350Z Track Edition Rotor Kit.

For this prototype group the price will be $785.00, must be paid up front. If we can't get 5-prototype buyers together, we might not be able to do this.

Kit will be a bolt-on kit:

2x Wilwood Superlite Calipers (Wilwood Part 120-11128)
4x BP-10 Wilwood Pads
2x 350Z Track Edition Rotor, 4 or 5 lug, drilled and/or slotted (328mm)
2x Custom Mounting Brackets to properly place the Wilwood Caliper/Pad on the rotor.
2x Custom Braided Lines with fittings
All Hardware (bolts, washers, etc.) needed for installation

The custom brackets and braided lines will be manufactured by Silvermine Motors; it is basically their standard 350Z Rotor kit, Click Here. except with a Wilwood Caliper instead of a Z32 caliper, and different mounting brackets.

I'll keep track of interest here. They won't need funds until we decide to move forward with this, but the key is we need to get at least 4-more prototype buyers.

1. addicted2sp33d
2.
3.
4.
5.

Thanks for looking!

**mrmephistopheles** · 04-22-2014, 01:28 PM

This thread/GB has my approval.

RalliartRsX · 04-22-2014, 01:37 PM

I have a VERY similar setup. I'll post a pic when I get home

Sideways_In_SD · 04-22-2014, 01:53 PM

My name is Warren, and I approve this message

blueshark123 · 04-22-2014, 07:36 PM

Why don't you just sell brackets like someone else did? 785 isn't a bad price though. I would buy it if they only cleared my wheels :/

addicted2sp33d · 04-23-2014, 08:50 AM

Quote:

Originally Posted by blueshark123

Why don't you just sell brackets like someone else did? 785 isn't a bad price though. I would buy it if they only cleared my wheels :/

I'm not selling anything myself - I don't get any cut of the sales.

This Group Buy came-about because I wanted to design a 13" BBK for my own S14 with the following criteria:

13" slotted rotor
Better value than the full Brembo setup or some other $2k - $3k BBK from a Name Brand.
Lower cost of "consumables" - e.g. rotor / pads, so OEM where possible

I arrived at the Wilwood/350Z TE rotor with these criteria, and contacted Silver Mine Motors to see if they had such a setup/kit.

Silver Mine said they didn't have exactly what I was looking-for, but if I could get 4 other people who would prototype with me, they could put a kit together and eventually sell the kit at a full "retail" price.

The Prototype group is actually getting some significant cost savings that future buyers will not see.

inopsey · 04-23-2014, 11:58 AM

would this package be available without rotors? being that they are 350z/available everywhere. does the price include shipping charges?

hobbs · 04-23-2014, 12:12 PM

Why not just purchase one of the already available conversion brackets and make your own kit? A guy over on the Nissan road race forum does group buys for these brackets, everything else is easily purchased from online retailers and to be honest I believe it's cheaper than what silver mine is charging you for a 'group buy' price.

addicted2sp33d · 04-23-2014, 12:37 PM

Quote:

Originally Posted by hobbs

Why not just purchase one of the already available conversion brackets and make your own kit? A guy over on the Nissan road race forum does group buys for these brackets, everything else is easily purchased from online retailers and to be honest I believe it's cheaper than what silver mine is charging you for a 'group buy' price.

I went to NRRF first and didn't find what I was looking-for.

Def's kit/bracket uses a 2-piece 12.2" rotor. It's a great kit at a reasonable price, but it uses a smaller diameter (but thicker) rotor, instead of an off-the-shelf rotor. His kit is definitely on my backup list if this Group Buy doesn't happen, but he doesn't have any Group Buys or kits right now - parts only.

2fass240us hasn't responded to my PMs and does not have any ongoing group buys or brackets available from what I found over there.

*e1_griego* · 04-23-2014, 02:54 PM

it's not Def's kit.

http://nissanroadracing.com/showthre...t=350z+wilwood

Def is starting another group buy in the next week, he ways.

jt1583 · 07-10-2014, 01:38 PM

Anything happen with this? I could be interested

RalliartRsX · 07-10-2014, 02:12 PM

Quote:

Originally Posted by e1_griego

it's not Def's kit.

http://nissanroadracing.com/showthre...t=350z+wilwood

Def is starting another group buy in the next week, he ways.

The Group buy was setup a few days ago if anyone is interested!

inopsey · 07-12-2014, 10:19 AM

this kit is cheaper than defs kit ($1040 vs $785) and uses 350z rotors available everywhere vs the 2 piece wilwood rotors

RalliartRsX · 07-12-2014, 10:54 AM

Def uses 2 piece circle track rotors, so you can pretty much get them anywhere. However yes, no Advanced auto, etc. to purchase circle track rotors but if you are tracking your car, you SHOULD be inspecting the rotors ever so often, so if you do have to order rotors, you should have plenty of time to swap them in...........or you can just buy several sets of rotors as they are fairly cheap to purchase.

S-Chassis ftw · 11-18-2014, 08:53 AM

Buy the ArizonaZCar kit. Costs $800 and comes with everything. 4 pistons of course.

Sent from my iPhone using Tapatalk

04-22-2014, 01:10 PM	#1
addicted2sp33d Leaky Injector Join Date: Feb 2003 Location: 2 Seconds ahead with 1 turn to checker. Posts: 102 Trader Rating: (0) Feedback Score: 0 reviews	Wilwood/350Z Track Edition BBK Hi Zilvia, Wanted to see if I could find 4 other S-Chassis owners to go into a group buy with me on a Wilwood/350Z Track Edition Rotor Kit. For this prototype group the price will be $785.00, must be paid up front. If we can't get 5-prototype buyers together, we might not be able to do this. Kit will be a bolt-on kit: 2x Wilwood Superlite Calipers (Wilwood Part 120-11128) 4x BP-10 Wilwood Pads 2x 350Z Track Edition Rotor, 4 or 5 lug, drilled and/or slotted (328mm) 2x Custom Mounting Brackets to properly place the Wilwood Caliper/Pad on the rotor. 2x Custom Braided Lines with fittings All Hardware (bolts, washers, etc.) needed for installation The custom brackets and braided lines will be manufactured by Silvermine Motors; it is basically their standard 350Z Rotor kit, Click Here. except with a Wilwood Caliper instead of a Z32 caliper, and different mounting brackets. I'll keep track of interest here. They won't need funds until we decide to move forward with this, but the key is we need to get at least 4-more prototype buyers. 1. addicted2sp33d 2. 3. 4. 5. Thanks for looking! __________________ Shift_faster

04-22-2014, 01:53 PM	#4
Sideways_In_SD Leaky Injector Join Date: Oct 2003 Location: Waay too low in SFL Age: 45 Posts: 102 Trader Rating: (0) Feedback Score: 0 reviews	My name is Warren, and I approve this message __________________ www.myspace.com/westslideconnection www.vertex-usa.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-22-2014, 01:37 PM	#3
RalliartRsX Post Whore! Join Date: Apr 2006 Location: Maryland Posts: 4,753 Trader Rating: (32) Feedback Score: 32 reviews	I have a VERY similar setup. I'll post a pic when I get home

04-22-2014, 07:36 PM	#5
blueshark123 Post Whore! Join Date: Apr 2006 Location: North Jersey Posts: 5,481 Trader Rating: (55) Feedback Score: 55 reviews	Why don't you just sell brackets like someone else did? 785 isn't a bad price though. I would buy it if they only cleared my wheels :/

04-23-2014, 11:58 AM	#7
inopsey Nissanaholic! Join Date: Jul 2008 Location: canada Posts: 1,665 Trader Rating: (21) Feedback Score: 21 reviews	would this package be available without rotors? being that they are 350z/available everywhere. does the price include shipping charges?

04-23-2014, 12:12 PM	#8
hobbs Nissanaholic! Join Date: Aug 2010 Location: Under a rock Posts: 2,263 Trader Rating: (43) Feedback Score: 43 reviews	Why not just purchase one of the already available conversion brackets and make your own kit? A guy over on the Nissan road race forum does group buys for these brackets, everything else is easily purchased from online retailers and to be honest I believe it's cheaper than what silver mine is charging you for a 'group buy' price.

04-23-2014, 02:54 PM	#10
e1_griego Premium Member Join Date: Sep 2004 Location: Independence, Ore. Age: 36 Posts: 2,642 Trader Rating: (24) Feedback Score: 24 reviews	it's not Def's kit. http://nissanroadracing.com/showthre...t=350z+wilwood Def is starting another group buy in the next week, he ways.

07-10-2014, 01:38 PM	#11
jt1583 Zilvia Member Join Date: Jul 2005 Location: Georgia Age: 33 Posts: 262 Trader Rating: (3) Feedback Score: 3 reviews	Anything happen with this? I could be interested

07-12-2014, 10:19 AM	#13
inopsey Nissanaholic! Join Date: Jul 2008 Location: canada Posts: 1,665 Trader Rating: (21) Feedback Score: 21 reviews	this kit is cheaper than defs kit ($1040 vs $785) and uses 350z rotors available everywhere vs the 2 piece wilwood rotors

07-12-2014, 10:54 AM	#14
RalliartRsX Post Whore! Join Date: Apr 2006 Location: Maryland Posts: 4,753 Trader Rating: (32) Feedback Score: 32 reviews	Def uses 2 piece circle track rotors, so you can pretty much get them anywhere. However yes, no Advanced auto, etc. to purchase circle track rotors but if you are tracking your car, you SHOULD be inspecting the rotors ever so often, so if you do have to order rotors, you should have plenty of time to swap them in...........or you can just buy several sets of rotors as they are fairly cheap to purchase.

11-18-2014, 08:53 AM	#15
S-Chassis ftw Join Date: Nov 2014 Location: Maryland Age: 25 Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	Buy the ArizonaZCar kit. Costs $800 and comes with everything. 4 pistons of course. Sent from my iPhone using Tapatalk