Stock ka24de camshaft upgrade - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

thelrgkid · 03-15-2010, 10:51 AM

Hey everyone. I've got an 93' s13 with a stock ka24de in it.

First I want to know what the stock cams are at? Are they 260/260??

Second I want to know is which should I upgrade to on a non turbo Kade?

Third what's the difference in brand if all stage two are 264/264?

Fourth is stage three too much extra on a stock motor???

Also I want to build a motor for later with turbo so I would be using these cams in that as well

all comments and criticism is welcome. I want to know.

Thanks for the help!!!

punxva · 03-15-2010, 11:09 AM

#/f/tech-talk/129780...aps-guide.html

there's a thread i made a few years ago.. hope it helps

iwannaslyde · 03-15-2010, 11:58 AM

^yeah that thread FTW. great write up

thelrgkid · 03-15-2010, 12:53 PM

I get a lot of info from that thread but Is swaping oem caps producing more power top and bottom end than aftermarket cams?

thelrgkid · 03-17-2010, 09:10 AM

45 views 3, now 4 replys??

Someone has a step 2 cams so any and everyone throw down your opinions please.

Thank you

03-15-2010, 10:51 AM	#1
thelrgkid Zilvia Member Join Date: Aug 2009 Location: Sacramento CA Age: 31 Posts: 207 Trader Rating: (2) Feedback Score: 2 reviews	Stock ka24de camshaft upgrade Hey everyone. I've got an 93' s13 with a stock ka24de in it. First I want to know what the stock cams are at? Are they 260/260?? Second I want to know is which should I upgrade to on a non turbo Kade? Third what's the difference in brand if all stage two are 264/264? Fourth is stage three too much extra on a stock motor??? Also I want to build a motor for later with turbo so I would be using these cams in that as well all comments and criticism is welcome. I want to know. Thanks for the help!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-15-2010, 11:58 AM	#3
iwannaslyde Zilvia Member Join Date: Jan 2010 Location: Kissimmee, FL Age: 34 Posts: 224 Trader Rating: (0) Feedback Score: 0 reviews	^yeah that thread FTW. great write up

03-15-2010, 12:53 PM	#4
thelrgkid Zilvia Member Join Date: Aug 2009 Location: Sacramento CA Age: 31 Posts: 207 Trader Rating: (2) Feedback Score: 2 reviews	I get a lot of info from that thread but Is swaping oem caps producing more power top and bottom end than aftermarket cams?

03-17-2010, 09:10 AM	#5
thelrgkid Zilvia Member Join Date: Aug 2009 Location: Sacramento CA Age: 31 Posts: 207 Trader Rating: (2) Feedback Score: 2 reviews	45 views 3, now 4 replys?? Someone has a step 2 cams so any and everyone throw down your opinions please. Thank you