What type of LSD is this - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Lilredsx · 07-22-2013, 04:42 PM

I recently purchased this LSD and I used my diff cover since it was previously in an S13, so I'm trying to figure out what type it is and what oil is best to use in it. I don't want this one to end up like my last diff.

[IMG]

[/IMG]

[IMG]

[/IMG]

*brndck* · 07-22-2013, 04:52 PM

If its a clutch type, use kaaz.

Lilredsx · 07-22-2013, 05:15 PM

I'm not sure what type it is. And it makes quite a racket on left turns also. Lots of thumping.

jr_ss · 07-22-2013, 05:18 PM

Looks like a factory VLSD. You should put the factory recommended 75w-90 in it. You cannot replace the viscous fluid and hopefully, you didn't pay a fortune for a possibly worn out diff.

zooopreme · 07-23-2013, 09:48 AM

Quote:

Originally Posted by jr_ss

Looks like a factory VLSD. You should put the factory recommended 75w-90 in it. You cannot replace the viscous fluid and hopefully, you didn't pay a fortune for a possibly worn out diff.

Quote:

Originally Posted by jr_ss

Nope, no special fluids required. The VLSD unit is a seal piece inside the piece with large round holes.

These are the only two posts that you need to really take into consideration. Seeing as though you paid $150, try to see if it locks properly. If not, don't feel too bad about your purchase, you may need to shim your VLSD because the sealed unit within is worn and will act more like an open than what an LSD unit is supposed to act like.

Lilredsx · 07-23-2013, 01:40 PM

Not sure how to test the lock, but the night I put it in, I went to do a u-Turn and ended up doing a 270, It was more than willing to rotate, and if I do a little power braking, both tires will spin. I'll pull it back down in a couple days to see if there are any obvious issues or metal and then try to do a shim later on when I have access to some power tools.

Thanks to all for the responses so far.

Lilredsx · 07-22-2013, 06:05 PM

Yeah, I used the proper weight fluid, I think it was Mobile brand, I'd have to check when I get home.
I paid $150 for it.

cotbu · 07-22-2013, 09:57 PM

VLSD, I've been cataloging mystery lsd's and I come up with an I dentification system that seems to work.

The holes sizes(big) and spacing and the beveled edge opposite of the ring gear are a clear indication of a VLSD.
Most clutch type lsd's I've cataloged are more square or flat opposite the ring gear.
This was sold to me as a vsld! Not the actual shit but the same you know what i mean.

Lilredsx · 07-23-2013, 07:50 AM

So if it's VLSD, is there special fluid that i need to have in it?
This is what I put in. 1 and a half jugs of it.

[IMG]

[/IMG]

jr_ss · 07-23-2013, 09:08 AM

Nope, no special fluids required. The VLSD unit is a seal piece inside the piece with large round holes.

***enkei2k*** · 07-23-2013, 02:44 PM

http://zilvia.net/f/chat/174916-identify-thread.html

07-22-2013, 04:42 PM	#1
Lilredsx Join Date: Jun 2012 Location: FL Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	What type of LSD is this I recently purchased this LSD and I used my diff cover since it was previously in an S13, so I'm trying to figure out what type it is and what oil is best to use in it. I don't want this one to end up like my last diff. [IMG][/IMG] [IMG][/IMG]

07-22-2013, 05:18 PM	#4
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,052 Trader Rating: (34) Feedback Score: 34 reviews	Looks like a factory VLSD. You should put the factory recommended 75w-90 in it. You cannot replace the viscous fluid and hopefully, you didn't pay a fortune for a possibly worn out diff. __________________ My SR20VET

07-23-2013, 01:40 PM	#6
Lilredsx Join Date: Jun 2012 Location: FL Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	Not sure how to test the lock, but the night I put it in, I went to do a u-Turn and ended up doing a 270, It was more than willing to rotate, and if I do a little power braking, both tires will spin. I'll pull it back down in a couple days to see if there are any obvious issues or metal and then try to do a shim later on when I have access to some power tools. Thanks to all for the responses so far. Last edited by Lilredsx; 07-23-2013 at 02:30 PM..

07-22-2013, 09:57 PM	#8
cotbu Post Whore! Join Date: Sep 2005 Location: SWFL Age: 47 Posts: 3,318 Trader Rating: (3) Feedback Score: 3 reviews	VLSD, I've been cataloging mystery lsd's and I come up with an I dentification system that seems to work. The holes sizes(big) and spacing and the beveled edge opposite of the ring gear are a clear indication of a VLSD. Most clutch type lsd's I've cataloged are more square or flat opposite the ring gear. This was sold to me as a vsld! Not the actual shit but the same you know what i mean. __________________ LoverTechnologies "Half Broken Things!"

07-23-2013, 07:50 AM	#9
Lilredsx Join Date: Jun 2012 Location: FL Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	So if it's VLSD, is there special fluid that i need to have in it? This is what I put in. 1 and a half jugs of it. [IMG][/IMG]

07-22-2013, 05:15 PM	#3
Lilredsx Join Date: Jun 2012 Location: FL Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	I'm not sure what type it is. And it makes quite a racket on left turns also. Lots of thumping.

07-22-2013, 06:05 PM	#7
Lilredsx Join Date: Jun 2012 Location: FL Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	Yeah, I used the proper weight fluid, I think it was Mobile brand, I'd have to check when I get home. I paid $150 for it.

07-23-2013, 09:08 AM	#10
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,052 Trader Rating: (34) Feedback Score: 34 reviews	Nope, no special fluids required. The VLSD unit is a seal piece inside the piece with large round holes. __________________ My SR20VET

07-23-2013, 02:44 PM	#11
*enkei2k* Super Moderator Join Date: Jul 2007 Location: over the river and through the woods Age: 36 Posts: 7,160 Trader Rating: (29) Feedback Score: 29 reviews	http://zilvia.net/f/chat/174916-identify-thread.html __________________ Ask enkei2k xquizitditz

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode