vlsd in to a 90 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jamik_69 · 03-03-2005, 08:04 PM

hello sorry for the noob question i did a search didnt come up with much other then what vlsd's i can use

however what will i need to do to put a 93 s-13 vlsd out of a canadian 240sx
into my 90 i am getting the whole unit (vlsd and housing/pumpkin) will my half shafts bolt right up and will my driveshaft work (i dont have abs)

thanks

sticky240 · 03-03-2005, 11:59 PM

I am pretty sure that is you have everything from the previous car (ala 93 240SX w/ VLSD) then it will bolt right up. Everything being the pumpkin, VLSD unit w/ gear, and stub/half shafts

trixxxr4_kids · 03-12-2005, 02:35 AM

everthing will bolt together fine unless you have HICAS or a JDM pumpkin , the us has 3 spokes on the half shaft bolt up side while the JDM half shafts have 5

03-03-2005, 08:04 PM	#1
jamik_69 Leaky Injector Join Date: Jan 2003 Location: ontario canada Age: 38 Posts: 73 Trader Rating: (0) Feedback Score: 0 reviews	vlsd in to a 90 hello sorry for the noob question i did a search didnt come up with much other then what vlsd's i can use however what will i need to do to put a 93 s-13 vlsd out of a canadian 240sx into my 90 i am getting the whole unit (vlsd and housing/pumpkin) will my half shafts bolt right up and will my driveshaft work (i dont have abs) thanks __________________ 1990 240sx coupe

03-03-2005, 11:59 PM	#2
sticky240 Zilvia Junkie Join Date: Dec 2003 Location: Moreno Valley, CA Age: 39 Posts: 468 Trader Rating: (0) Feedback Score: 0 reviews	I am pretty sure that is you have everything from the previous car (ala 93 240SX w/ VLSD) then it will bolt right up. Everything being the pumpkin, VLSD unit w/ gear, and stub/half shafts __________________ Guh-Noo-Beez

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-12-2005, 02:35 AM	#3
trixxxr4_kids BANNED Join Date: May 2003 Location: san diego Posts: 56 Trader Rating: (0) Feedback Score: 0 reviews	everthing will bolt together fine unless you have HICAS or a JDM pumpkin , the us has 3 spokes on the half shaft bolt up side while the JDM half shafts have 5