Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 03-11-2013, 09:15 PM   #31
spartan
Leaky Injector
 
Join Date: Jan 2013
Location: Ontario, CA
Age: 33
Posts: 90
Trader Rating: (1)
spartan is an unknown quantity at this point
Feedback Score: 1 reviews
another thing id like to ad about how the car runs is the idle gets very high at times but doesnt jump around like a vacuum leak. it idles as high as 1600 rpm then 1100 is the norm
spartan is offline   Reply With Quote
Sponsored Links
Old 03-11-2013, 10:29 PM   #32
Rb26kouki
Zilvia FREAK!
 
Rb26kouki's Avatar
 
Join Date: Apr 2012
Location: Commerce
Age: 29
Posts: 1,456
Trader Rating: (62)
Rb26kouki is an unknown quantity at this point
Feedback Score: 62 reviews
I checked my gas tank & no leaks. i just ordered my AEM A/F ratio sensor for my Gauge to see what its reading. (This is a must for turbo cars)
Also got the ECU checked by a friend of mine & its not throwing any codes

All i want is a nice healthy running SR

Also there are 3 FUEL lines coming from the back of the car to the front
i know one is obviously the feed line connected to the filter & theres a return line connected to the fuel pressure regulator. there is another line that is not connected to anything does anyone know whats its for should it be plugged up?
Rb26kouki is offline   Reply With Quote
Old 03-11-2013, 11:35 PM   #33
Drose
Leaky Injector
 
Join Date: Sep 2009
Location: Las Vegas
Posts: 77
Trader Rating: (1)
Drose is an unknown quantity at this point
Feedback Score: 1 reviews
That's for the charcoal canister. I didn't plug mine. I don't know if that's right but I couldn't find a solid answer.
Drose is offline   Reply With Quote
Old 03-12-2013, 03:29 AM   #34
Croustibat
Nissanaholic!
 
Join Date: Aug 2011
Location: France - Toulouse
Age: 41
Posts: 1,851
Trader Rating: (0)
Croustibat is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by spartan View Post
well it does look like signs of track use but when i say beaten up i meant like paint wise. everything else is in pretty good condition. lol why does greddy manifold make it more signs of rice?
Because it costs an arm and a leg, and nets 0 gain, unless the engine is already past 450/500HP.

Quote:
Originally Posted by Rb26kouki View Post
[...]
I did a compression test before I replaced the turbo & gaskets it read 160-160-142-160
[...]
Still trying to find the problem
Cylinder 3 on its way out ... compression should be 150psi max, so it is likely the engine has been rebuilt and head was skimmed without a thicker headgasket. Or the compression tester is off.

Try doing the test again on cylinder 3, if compression goes back to normal after some tries you are likely to have worn / sticking valve. If it does not though, check cylinder 3, piston, bore and head for det damage. These engine usually kill the 3rd cylinder first around ringland.

Last edited by Croustibat; 03-12-2013 at 08:38 AM..
Croustibat is offline   Reply With Quote
Old 03-12-2013, 03:47 AM   #35
Rb26kouki
Zilvia FREAK!
 
Rb26kouki's Avatar
 
Join Date: Apr 2012
Location: Commerce
Age: 29
Posts: 1,456
Trader Rating: (62)
Rb26kouki is an unknown quantity at this point
Feedback Score: 62 reviews
I will run another compression test tomorrow. See what the numbers looks like. Yea, I was surprise to see 160 on 3 of them.
Rb26kouki is offline   Reply With Quote
Old 03-13-2013, 04:55 PM   #36
spartan
Leaky Injector
 
Join Date: Jan 2013
Location: Ontario, CA
Age: 33
Posts: 90
Trader Rating: (1)
spartan is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by Rb26kouki View Post
I will run another compression test tomorrow. See what the numbers looks like. Yea, I was surprise to see 160 on 3 of them.
how did your compression test come out?
im thinking of buying a kit from harbor frieght im really worried my engine may be damaged.
spartan is offline   Reply With Quote
Old 03-13-2013, 08:10 PM   #37
codyace
Post Whore!
 
codyace's Avatar
 
Join Date: Dec 2004
Location: Poconos, PA
Age: 36
Posts: 8,030
Trader Rating: (58)
codyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfection
Feedback Score: 58 reviews
Send a message via AIM to codyace
Quote:
Originally Posted by Croustibat View Post
Because it costs an arm and a leg, and nets 0 gain, unless the engine is already past 450/500HP.
I disagree. I believe they are a great addition to any 28RS or 2871r or larger turbo'd SR20. A good friend of mine went from a similar setup as mine and lost a smidge of torque down load (below the usable turbo area mind you) and netted much more HP and torque from 4500rpm+ over the stocker setup.

I wouldn't run it on a stock turbo type setup, but anything beyond that, coupled with nice cams, is a perfect setup if you ask me. I could care less abotu 2500-3500 rpm, the only time i'm there is during mundane driving...whereas when I'm having fun I never drop below 4500 rpm.
__________________

Want Air Conditioning in your SR20 Swapped car? Check out www.sr20acbrackets.com for more information!

Quest Alternator Conversions for SR20! Check my Group Buy!

Tired of lousy internal gates? Go external wastegate with one of my manifolds, Check out my group buy
codyace is offline   Reply With Quote
Old 03-13-2013, 08:12 PM   #38
codyace
Post Whore!
 
codyace's Avatar
 
Join Date: Dec 2004
Location: Poconos, PA
Age: 36
Posts: 8,030
Trader Rating: (58)
codyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfection
Feedback Score: 58 reviews
Send a message via AIM to codyace
Quote:
Originally Posted by Croustibat View Post
You wont find a decend SR20 that does not need a rebuild, really.

100% agree. I think often times new owners tend to forget that the engines they are dealing with are 15 years old, andhave often been abused by 2 owners at this point in their life. Sure people will find a few good ones, but most have toasty rod bearings and washed out ring seal by this point in life
__________________

Want Air Conditioning in your SR20 Swapped car? Check out www.sr20acbrackets.com for more information!

Quest Alternator Conversions for SR20! Check my Group Buy!

Tired of lousy internal gates? Go external wastegate with one of my manifolds, Check out my group buy
codyace is offline   Reply With Quote
Old 03-14-2013, 03:54 AM   #39
Croustibat
Nissanaholic!
 
Join Date: Aug 2011
Location: France - Toulouse
Age: 41
Posts: 1,851
Trader Rating: (0)
Croustibat is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by codyace View Post
I disagree. I believe they are a great addition to any 28RS or 2871r or larger turbo'd SR20. A good friend of mine went from a similar setup as mine and lost a smidge of torque down load (below the usable turbo area mind you) and netted much more HP and torque from 4500rpm+ over the stocker setup.

I wouldn't run it on a stock turbo type setup, but anything beyond that, coupled with nice cams, is a perfect setup if you ask me. I could care less abotu 2500-3500 rpm, the only time i'm there is during mundane driving...whereas when I'm having fun I never drop below 4500 rpm.
The $$$$/HP gain ratio of these is ultra high compared to the $$$$/HP ratio of a bigger turbo, cams or any item that really increase power, that is what i meant. I mean ... they cost 1000$+ delivered. For what ? increased low end torque ? No thanks.
Croustibat is offline   Reply With Quote
Old 03-14-2013, 11:13 AM   #40
spartan
Leaky Injector
 
Join Date: Jan 2013
Location: Ontario, CA
Age: 33
Posts: 90
Trader Rating: (1)
spartan is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by codyace View Post
100% agree. I think often times new owners tend to forget that the engines they are dealing with are 15 years old, andhave often been abused by 2 owners at this point in their life. Sure people will find a few good ones, but most have toasty rod bearings and washed out ring seal by this point in life
so would you recommend i just rebuild or buy another motor?
I keep debating the issue but im not building a drift or race spec car nor do i have the funds to.
My goal is to have a very fun daily with anywhere from 250-350hp.
I dont plan to keep the car unless i fall in love with it, but i still plan to keep it for 4 or 5 years.
spartan is offline   Reply With Quote
Old 03-14-2013, 12:31 PM   #41
Rb26kouki
Zilvia FREAK!
 
Rb26kouki's Avatar
 
Join Date: Apr 2012
Location: Commerce
Age: 29
Posts: 1,456
Trader Rating: (62)
Rb26kouki is an unknown quantity at this point
Feedback Score: 62 reviews
It will always be better to build it then to buy another stock engine with miles already in it. & then you know what you have & know the history of the engine when it's freshly built.
Rb26kouki is offline   Reply With Quote
Old 03-14-2013, 03:38 PM   #42
Tom N
Zilvia Addict
 
Join Date: Oct 2012
Location: SW Florida
Posts: 746
Trader Rating: (1)
Tom N is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by Croustibat View Post
The $$$$/HP gain ratio of these is ultra high compared to the $$$$/HP ratio of a bigger turbo, cams or any item that really increase power, that is what i meant. I mean ... they cost 1000$+ delivered. For what ? increased low end torque ? No thanks.
I would think the manifold would lose low end tourque in favor of more top end hp.

On a 2871 and smaller turbo I would think a extrude honed intake manifold would be benificial.
Especially at widening the power band.
Tom N is offline   Reply With Quote
Old 03-15-2013, 01:45 PM   #43
Deviance
Zilvia Member
 
Deviance's Avatar
 
Join Date: Dec 2009
Location: Socal, CA
Age: 35
Posts: 201
Trader Rating: (7)
Deviance is an unknown quantity at this point
Feedback Score: 7 reviews
I love spartan
Deviance is offline   Reply With Quote
Old 03-15-2013, 04:57 PM   #44
spartan
Leaky Injector
 
Join Date: Jan 2013
Location: Ontario, CA
Age: 33
Posts: 90
Trader Rating: (1)
spartan is an unknown quantity at this point
Feedback Score: 1 reviews
There are zero fuel leaks onto the floor. This is getting ridiculous I filled up the tank yesterday morning an 150miles later im on empty
spartan is offline   Reply With Quote
Old 03-16-2013, 04:28 AM   #45
Croustibat
Nissanaholic!
 
Join Date: Aug 2011
Location: France - Toulouse
Age: 41
Posts: 1,851
Trader Rating: (0)
Croustibat is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by Tom N View Post
I would think the manifold would lose low end tourque in favor of more top end hp.

On a 2871 and smaller turbo I would think a extrude honed intake manifold would be benificial.
Especially at widening the power band.
The greddy mani is just a cast aluminium manifold.
Croustibat is offline   Reply With Quote
Old 03-16-2013, 06:50 AM   #46
Tom N
Zilvia Addict
 
Join Date: Oct 2012
Location: SW Florida
Posts: 746
Trader Rating: (1)
Tom N is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by Croustibat View Post
The greddy mani is just a cast aluminium manifold.
I'm aware of that. I guess I need to be more clear. When I said a extrude honed intake manifold I am meaning a extrude honed stock intake manifold.
Tom N is offline   Reply With Quote
Old 03-18-2013, 11:38 AM   #47
spartan
Leaky Injector
 
Join Date: Jan 2013
Location: Ontario, CA
Age: 33
Posts: 90
Trader Rating: (1)
spartan is an unknown quantity at this point
Feedback Score: 1 reviews
Changed oil (Amsoil 100% Synthetic 5w30) at a pep boys service station.
Found out a few things, the oil pan is slightly dented inward from the bottom, nothing major at all, the tension rod bushings are busted and getting worse, brakes are fading, and theres a nail in my rear tire which is slowly losing pressure.
but there was nothing else that lead to the cause of why my fuel is so bad, one of the guys there told me it probably needs a tune which would make a lot of sense. gonna invest in that soon. I was thinking of just getting a type of piggy back system like the Apexi Neo afc. Anything else in that price range you guys can recommend?
spartan is offline   Reply With Quote
Old 03-18-2013, 08:32 PM   #48
spartan
Leaky Injector
 
Join Date: Jan 2013
Location: Ontario, CA
Age: 33
Posts: 90
Trader Rating: (1)
spartan is an unknown quantity at this point
Feedback Score: 1 reviews
Also got ny z32 fuel filter today, this things huge! Prolly gonna swap it tomorrow. Gas consumption is still getting worse
spartan is offline   Reply With Quote
Old 03-19-2013, 12:21 AM   #49
spartan
Leaky Injector
 
Join Date: Jan 2013
Location: Ontario, CA
Age: 33
Posts: 90
Trader Rating: (1)
spartan is an unknown quantity at this point
Feedback Score: 1 reviews
So after doing a little reading i think a damaged o2 sensor might be the reason being my horrible mpg's also reading another helpful thread on Zilvia it says there are 2 different kind for the red top, the black top uses the z32 tt. from what i read i need "skinny" version for my red top can someone else confirm before i spend $90 on one.
Here's a link to one i found on ebay.
Genuine Nissan O2 Sensor Skinny SR20DET sr20 Silvia s13 180sx JDM 22690 50F00 | eBay
spartan is offline   Reply With Quote
Old 03-19-2013, 05:05 AM   #50
motorhed
 
Join Date: Jan 2013
Location: long island, ny
Age: 34
Posts: 7
Trader Rating: (0)
motorhed is an unknown quantity at this point
Feedback Score: 0 reviews
Did you check ur fpr? Did you try another set of injectors? Is your fuel pump healthy? These are all things you have to do before you waste more time and money.
Solution is get a daily! And yeah compression test it too!
Do you have a multimeter? Check your o/2 sensors!
__________________
97 240HB ka-t AUTO-X
motorhed is offline   Reply With Quote
Old 03-19-2013, 06:34 PM   #51
spartan
Leaky Injector
 
Join Date: Jan 2013
Location: Ontario, CA
Age: 33
Posts: 90
Trader Rating: (1)
spartan is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by motorhed View Post
Did you check ur fpr? Did you try another set of injectors? Is your fuel pump healthy? These are all things you have to do before you waste more time and money.
Solution is get a daily! And yeah compression test it too!
Do you have a multimeter? Check your o/2 sensors!
Check my fpr for what? i dont have another set of injecotrs.
This car is my daily im trying to get it back to par.
Yes i have muiltimeter what should i use it on?
Getting o2 replaced this week.
spartan is offline   Reply With Quote
Old 03-19-2013, 06:43 PM   #52
KiLLeR2001
Post Whore!
 
Join Date: Jun 2007
Location: オーランドフロリダ
Posts: 7,955
Trader Rating: (46)
KiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud of
Feedback Score: 46 reviews
If you have a stock SR20DET your spark plug gap needs to be 0.036". This will insure all the fuel gets burnt within the cylinder.
__________________
KiLLeR2001 is offline   Reply With Quote
Old 03-19-2013, 11:07 PM   #53
spartan
Leaky Injector
 
Join Date: Jan 2013
Location: Ontario, CA
Age: 33
Posts: 90
Trader Rating: (1)
spartan is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by KiLLeR2001 View Post
If you have a stock SR20DET your spark plug gap needs to be 0.036". This will insure all the fuel gets burnt within the cylinder.
How the hell could I know if it has .0036 inch gap?
spartan is offline   Reply With Quote
Old 03-19-2013, 11:11 PM   #54
spartan
Leaky Injector
 
Join Date: Jan 2013
Location: Ontario, CA
Age: 33
Posts: 90
Trader Rating: (1)
spartan is an unknown quantity at this point
Feedback Score: 1 reviews
This is my fuel filter correct? What is that open line underneath? Its a hard line im wondering if its a fuel line also.
spartan is offline   Reply With Quote
Old 03-19-2013, 11:22 PM   #55
spartan
Leaky Injector
 
Join Date: Jan 2013
Location: Ontario, CA
Age: 33
Posts: 90
Trader Rating: (1)
spartan is an unknown quantity at this point
Feedback Score: 1 reviews
I noticed injector 1 doesn't sit as flush as the others, could this be my problem?

I tried to pound it back in but I fucken broke the clip.
spartan is offline   Reply With Quote
Old 03-20-2013, 06:37 PM   #56
spartan
Leaky Injector
 
Join Date: Jan 2013
Location: Ontario, CA
Age: 33
Posts: 90
Trader Rating: (1)
spartan is an unknown quantity at this point
Feedback Score: 1 reviews
bump still need help
spartan is offline   Reply With Quote
Old 03-20-2013, 06:39 PM   #57
KiLLeR2001
Post Whore!
 
Join Date: Jun 2007
Location: オーランドフロリダ
Posts: 7,955
Trader Rating: (46)
KiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud ofKiLLeR2001 has much to be proud of
Feedback Score: 46 reviews
Quote:
Originally Posted by spartan View Post
How the hell could I know if it has .0036 inch gap?
It's 0.036". And you pull the plugs out and use one of these...



Which can be found at any auto parts store. Hell, I bet even Walmart has them.
__________________
KiLLeR2001 is offline   Reply With Quote
Old 03-22-2013, 03:31 PM   #58
spartan
Leaky Injector
 
Join Date: Jan 2013
Location: Ontario, CA
Age: 33
Posts: 90
Trader Rating: (1)
spartan is an unknown quantity at this point
Feedback Score: 1 reviews
So found this damage from charge pipe to intercooler.

I couldn't find on of my damn spare couplers to fit because of this is how the charge pipe and the intercooler meet up.

So my nerdy tech brother repaired it for me. Its just a temporary fix but it does the job.

Then this guy hoped in the passenger so I gave him my car...

Lol so I would say 90% of my problems have been fixed just because of that. Not really smelling fuel any more, 100x more powerful I shit u not. And I went from getting 6mpg to about 26mpg all because that stupid rip. So im gonna cut the charge pipe so its straight then use a 90 degree angle coupler.
spartan is offline   Reply With Quote
Old 03-22-2013, 04:20 PM   #59
bc.
Zilvia Addict
 
bc.'s Avatar
 
Join Date: Aug 2010
Location: St. Louis
Posts: 868
Trader Rating: (0)
bc. is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by spartan View Post
This is my fuel filter correct? What is that open line underneath? Its a hard line im wondering if its a fuel line also.
That open line looks like a vent for the fuel tank.

Quote:
Originally Posted by KiLLeR2001 View Post
It's 0.036". And you pull the plugs out and use one of these...



Which can be found at any auto parts store. Hell, I bet even Walmart has them.
Yes, these are sold at walmart
__________________
* S14SR22 * 9.0 c/r * GT3071R *
bc. is offline   Reply With Quote
Old 06-20-2013, 06:40 PM   #60
spartan
Leaky Injector
 
Join Date: Jan 2013
Location: Ontario, CA
Age: 33
Posts: 90
Trader Rating: (1)
spartan is an unknown quantity at this point
Feedback Score: 1 reviews
Just wanted to give an update, the car has been running great, currently i am getting 26mpg 90% highway driving i can easily get 350+ miles on less then 15 gallons of ARCO 91 octane with chevron a little less. and these results are me driving pretty fast on those days im running late to work. hopefully when i get better suspension an smaller wheels i can get close to 30mpgs!
spartan is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™