CA Drift Freaq Polyurethane Engine & Trans Mounts! FINAL CLEARANCE SALE! - Page 4 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

drift freaq · 12-30-2013, 12:43 PM

Quote:

Originally Posted by richmond82

thanks, my wife picked me up a set from you for christmas. Stoked to put these on and get rid of the circuit sports

very cool of her congrats and have a Happy New Year.

enriquetc240 · 12-30-2013, 12:48 PM

Hey bud you still have tranny mounts?

I so let me know if the price is still $129 so that I can pay you.

Thanks!

drift freaq · 01-01-2014, 04:27 PM

Quote:

Originally Posted by enriquetc240

Hey bud you still have tranny mounts?

I so let me know if the price is still $129 so that I can pay you.

Thanks!

p.m. sent.....

Migit240sx · 01-03-2014, 11:48 AM

Hey I'm interested in both engine and Tranny mount. I heard you're in Hollywood? Pm price picked up for both please!

Sent from my SGH-M919 using Tapatalk

drift freaq · 01-04-2014, 03:36 PM

Quote:

Originally Posted by Migit240sx

Hey I'm interested in both engine and Tranny mount. I heard you're in Hollywood? Pm price picked up for both please!

Sent from my SGH-M919 using Tapatalk

p.m. sent....

ProjectPanda13 · 01-04-2014, 05:05 PM

When will the next batch of mounts be shipped?

Thanks,
-Dave

Sent from my SGH-T889 using Tapatalk 2

drift freaq · 01-05-2014, 12:24 AM

Quote:

Originally Posted by ProjectPanda13

When will the next batch of mounts be shipped?

Thanks,
-Dave

Sent from my SGH-T889 using Tapatalk 2

They will be shipping this week Dave. Had so many orders during the sale had to do another run of everything. lol

ProjectPanda13 · 01-06-2014, 02:45 PM

^ sounds good. I can't wait to have these baby installed.
Latez,
-Dave

Sent from my SGH-T889 using Tapatalk 2

drift freaq · 01-15-2014, 01:36 PM

Just wanted to let people know,new run is in and shipping.

ProjectPanda13 · 01-21-2014, 10:09 AM

I received my mounts and they look good.

Hoping to install soon and hit the track when season opens up.

Latez,
-Dave

Sent from my SGH-T889 using Tapatalk 2

mjpagan89 · 01-22-2014, 02:23 PM

Not sure if it was already mentioned. I have an s14 w/rb26-rb25det trans not sure if these fit or if you make any rb swap specific. LMK please and thank you.

drift freaq · 01-22-2014, 08:15 PM

Quote:

Originally Posted by mjpagan89

Not sure if it was already mentioned. I have an s14 w/rb26-rb25det trans not sure if these fit or if you make any rb swap specific. LMK please and thank you.

Unless the particular setup you are using (which I strongly doubt) stock 240 mounts you would be out of luck.

240dream · 02-03-2014, 11:49 AM

With these mounts will the motor sit any lower?

kam9311 · 02-03-2014, 11:54 AM

Just want to say. These mounts are amazing. My motor was all over the place before with one broken stock mount. Put these in and I can feel the difference. Feels as if I have better pedal response and the power is put to the ground much more efficiently. Thanks again for the great mounts!

Sent from my EVO using Tapatalk

drift freaq · 02-03-2014, 12:35 PM

Quote:

Originally Posted by 240dream

With these mounts will the motor sit any lower?

It will put the engine about 1/2 inch lower than one equipped with Nismo mounts as far as stock mounts go that is a question mark. Reason being a lot of peoples stock mounts are severely worn and sag significantly.

Are you specifically trying to raise your engine? I know some drifters get the idea that they are protecting their oil pan better by trying to do that. Truth be told raising your engine raises your center of gravity and can upset handling in our cars. You want to either keep it in stock position or lower. My mounts do not drop your oil down below the crossmember either. If one is low enough to be concerned about ones oil pan then they should use a skid plate . Which is actually a good idea for any lowered car seeing competition of any sort.

240boi115 · 02-03-2014, 12:49 PM

Do you have Sohc KA motor and tranny mounts? If so I don't live too far away and would like a price of them picked up.

drift freaq · 02-03-2014, 12:56 PM

Quote:

Originally Posted by 240boi115

Do you have Sohc KA motor and tranny mounts? If so I don't live too far away and would like a price of them picked up.

yes I do and i sent you a p.m. about pickup.

yurisfriendevan · 02-09-2014, 01:38 PM

Price shipped for engine and trans mounts for a s13 sr20. Thanks

drift freaq · 02-10-2014, 06:11 PM

Quote:

Originally Posted by yurisfriendevan

Price shipped for engine and trans mounts for a s13 sr20. Thanks

they are $259 shipped. p.m. sent

EsChassisLove · 02-16-2014, 10:59 PM

Edit-No more troubles!

EsChassisLove · 02-16-2014, 11:05 PM

Lemme get a set of the newest version

EsChassisLove · 02-16-2014, 11:24 PM

Edit-problem solved!

drift freaq · 02-17-2014, 01:46 PM

People I need to reiterate this. Heat wrapping has been found to be a bad idea
The heat wrap does not allow the mount to breath thereby sealing heat in if they do get hot.

A common mistake people often make with heat wrapping is not putting anything on top of the mount. It is the closest thing to your turbo and therefor absorbs the most heat. If you have used heat wrap and not done anything to the top it can cause failure..

There is a reason even the factory Nissan heat shield is on top and bent over rather than just being on the side. Hence why I made my new heat shields to eliminate the possibility of user error.

I have lots of people running high HP engines with even factory heat shields and not having any problems.

So I reiterate do not use heat wrap pay the money and buy a heat shield.

deh422 · 02-19-2014, 07:10 PM

Can I get the heat shields separately? I bought the mounts a couple ago months before you offered the heat shields but haven't installed them yet.

Sent from my iPhone using Tapatalk

drift freaq · 02-20-2014, 12:11 PM

Quote:

Originally Posted by deh422

Can I get the heat shields separately? I bought the mounts a couple ago months before you offered the heat shields but haven't installed them yet.

Sent from my iPhone using Tapatalk

yes you can

deh422 · 02-20-2014, 01:21 PM

Pm price shipped and paypal

Sent from my iPhone using Tapatalk

drift freaq · 02-23-2014, 12:30 PM

Quote:

Originally Posted by deh422

Pm price shipped and paypal

Sent from my iPhone using Tapatalk

working on it. The main issue seems to be that shipping just a heat shield will cost almost as much as shipping a set of mounts. Its the box size thing, I will have to look into parcel post.

Irresistible · 02-24-2014, 07:45 PM

Ordered these recently, look to be awesome quality. I should be installing them fairly soon, but I was wondering how much these drop the motor? I just looked under my car at the oil pan and front subframe heights, and they seem to be pretty even with stock motor mounts. I don't want the oil pan to hang too low because my car is stupid low, even though I will be installing a skid plate.

slow92 · 02-24-2014, 07:55 PM

Do you have any pictures of the heat shields? Is it $10 for the heat shields even if I don't buy the mounts (already bought them)? Also, have you heard of anyone having problems with the transmission mount studs not lining up with the transmission cross member? One of the studs lines up but the other one won't unless I drill out the cross member in order to open up the hole.

drift freaq · 02-25-2014, 11:36 AM

Quote:

Originally Posted by Irresistible

Ordered these recently, look to be awesome quality. I should be installing them fairly soon, but I was wondering how much these drop the motor? I just looked under my car at the oil pan and front subframe heights, and they seem to be pretty even with stock motor mounts. I don't want the oil pan to hang too low because my car is stupid low, even though I will be installing a skid plate.

it will not drop your pan below the crossmember.

Quote:

Originally Posted by slow92

Do you have any pictures of the heat shields? Is it $10 for the heat shields even if I don't buy the mounts (already bought them)? Also, have you heard of anyone having problems with the transmission mount studs not lining up with the transmission cross member? One of the studs lines up but the other one won't unless I drill out the cross member in order to open up the hole.

There is a pic of the heatshield on a mount on the first page. The heat shields are $15 separately. You must have purchased your mounts at least 6 months ago. I had a small amount of trans mounts in a run 6 months ago that studs were off a bit this is. I actually pulled product and replaced it. You should have contacted me then. There have been no reported issues with trans mounts since before and after that.

12-30-2013, 12:48 PM	#92
enriquetc240 Zilvia Member Join Date: Nov 2007 Location: Miami Posts: 219 Trader Rating: (4) Feedback Score: 4 reviews	Hey bud you still have tranny mounts? I so let me know if the price is still $129 so that I can pay you. Thanks! __________________

01-15-2014, 01:36 PM	#99
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,558 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	Just wanted to let people know,new run is in and shipping. __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

02-03-2014, 11:49 AM	#103
240dream Zilvia Member Join Date: Nov 2010 Location: norwich ct Age: 29 Posts: 214 Trader Rating: (4) Feedback Score: 4 reviews	With these mounts will the motor sit any lower? __________________ All I read was "I'm a little bitch and don't belong in this thread".

02-16-2014, 10:59 PM	#110
EsChassisLove Nissanaholic! Join Date: Jan 2011 Location: San Diego Age: 32 Posts: 2,090 Trader Rating: (26) Feedback Score: 26 reviews	Edit-No more troubles! __________________ IG/TikTok-ThatS14_Z06guy Last edited by EsChassisLove; 02-17-2014 at 03:14 PM..

02-16-2014, 11:05 PM	#111
EsChassisLove Nissanaholic! Join Date: Jan 2011 Location: San Diego Age: 32 Posts: 2,090 Trader Rating: (26) Feedback Score: 26 reviews	Lemme get a set of the newest version __________________ IG/TikTok-ThatS14_Z06guy Last edited by EsChassisLove; 02-17-2014 at 03:15 PM..

01-03-2014, 11:48 AM	#94
Migit240sx Zilvia Addict Join Date: Oct 2011 Location: Los Angeles Posts: 637 Trader Rating: (15) Feedback Score: 15 reviews	Hey I'm interested in both engine and Tranny mount. I heard you're in Hollywood? Pm price picked up for both please! Sent from my SGH-M919 using Tapatalk

01-04-2014, 05:05 PM	#96
ProjectPanda13 Zilvia Addict Join Date: Dec 2007 Location: Atlanta, GA Age: 33 Posts: 603 Trader Rating: (8) Feedback Score: 8 reviews	When will the next batch of mounts be shipped? Thanks, -Dave Sent from my SGH-T889 using Tapatalk 2

01-06-2014, 02:45 PM	#98
ProjectPanda13 Zilvia Addict Join Date: Dec 2007 Location: Atlanta, GA Age: 33 Posts: 603 Trader Rating: (8) Feedback Score: 8 reviews	^ sounds good. I can't wait to have these baby installed. Latez, -Dave Sent from my SGH-T889 using Tapatalk 2

01-22-2014, 02:23 PM	#101
mjpagan89 Zilvia Member Join Date: May 2013 Location: San Diego, California Age: 31 Posts: 178 Trader Rating: (1) Feedback Score: 1 reviews	Not sure if it was already mentioned. I have an s14 w/rb26-rb25det trans not sure if these fit or if you make any rb swap specific. LMK please and thank you.

02-03-2014, 11:54 AM	#104
kam9311 Leaky Injector Join Date: May 2012 Location: Orange County Posts: 57 Trader Rating: (0) Feedback Score: 0 reviews	Just want to say. These mounts are amazing. My motor was all over the place before with one broken stock mount. Put these in and I can feel the difference. Feels as if I have better pedal response and the power is put to the ground much more efficiently. Thanks again for the great mounts! Sent from my EVO using Tapatalk

02-09-2014, 01:38 PM	#108
yurisfriendevan Zilvia Member Join Date: Apr 2008 Location: Lancaster, CA Age: 36 Posts: 159 Trader Rating: (6) Feedback Score: 6 reviews	Price shipped for engine and trans mounts for a s13 sr20. Thanks

02-16-2014, 11:24 PM	#112
EsChassisLove Nissanaholic! Join Date: Jan 2011 Location: San Diego Age: 32 Posts: 2,090 Trader Rating: (26) Feedback Score: 26 reviews	Edit-problem solved! __________________ IG/TikTok-ThatS14_Z06guy Last edited by EsChassisLove; 02-17-2014 at 03:13 PM..

02-17-2014, 01:46 PM	#113
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,558 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	People I need to reiterate this. Heat wrapping has been found to be a bad idea The heat wrap does not allow the mount to breath thereby sealing heat in if they do get hot. A common mistake people often make with heat wrapping is not putting anything on top of the mount. It is the closest thing to your turbo and therefor absorbs the most heat. If you have used heat wrap and not done anything to the top it can cause failure.. There is a reason even the factory Nissan heat shield is on top and bent over rather than just being on the side. Hence why I made my new heat shields to eliminate the possibility of user error. I have lots of people running high HP engines with even factory heat shields and not having any problems. So I reiterate do not use heat wrap pay the money and buy a heat shield. __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html Last edited by drift freaq; 02-18-2014 at 07:34 PM.. Reason: grammatical errors

02-19-2014, 07:10 PM	#114
deh422 Join Date: Jul 2012 Location: Virginia Posts: 13 Trader Rating: (0) Feedback Score: 0 reviews	Can I get the heat shields separately? I bought the mounts a couple ago months before you offered the heat shields but haven't installed them yet. Sent from my iPhone using Tapatalk

02-20-2014, 01:21 PM	#116
deh422 Join Date: Jul 2012 Location: Virginia Posts: 13 Trader Rating: (0) Feedback Score: 0 reviews	Pm price shipped and paypal Sent from my iPhone using Tapatalk

02-24-2014, 07:45 PM	#118
Irresistible Nissanaholic! Join Date: Dec 2009 Location: Chicago, IL Posts: 1,994 Trader Rating: (21) Feedback Score: 21 reviews	Ordered these recently, look to be awesome quality. I should be installing them fairly soon, but I was wondering how much these drop the motor? I just looked under my car at the oil pan and front subframe heights, and they seem to be pretty even with stock motor mounts. I don't want the oil pan to hang too low because my car is stupid low, even though I will be installing a skid plate. __________________ GLEAM//★☆Street Dancer☆★ IG: streetdncr // tumblr: steve-strtdncr

02-24-2014, 07:55 PM	#119
slow92 Zilvia Junkie Join Date: Jun 2008 Location: NV Posts: 423 Trader Rating: (16) Feedback Score: 16 reviews	Do you have any pictures of the heat shields? Is it $10 for the heat shields even if I don't buy the mounts (already bought them)? Also, have you heard of anyone having problems with the transmission mount studs not lining up with the transmission cross member? One of the studs lines up but the other one won't unless I drill out the cross member in order to open up the hole. __________________ Sr22 in the works

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode