Hybrid Development GTSpec Intercooler Kits for $425! - Page 3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

hipro · 09-26-2006, 02:46 AM

Quote:

Originally Posted by sunnys14

is the s13 intercooler kit still in stock?

Yes, and more are on their way. Thanks, Mike Browning www.hiprollc.com

hipro · 09-26-2006, 02:48 AM

Quote:

Originally Posted by mr_240sx

does the intercooler come with the painted logo on it?

No, but we do have stencils if you want to paint it on yourself, which some customers have done. Either plain Hybrid or HDi (Hybrid Development International). Thanks, Mike Browning www.hiprollc.com

vqboodah · 10-13-2006, 03:47 PM

can i buy just the S14 intercooler pipe kit itself? kit comes with all clamps, couplers, hotpipe, cold pipe etc right? i already have an intercooler. also, how much?

MrBojangles · 10-14-2006, 08:41 PM

Hey I know this has been going on a long time but I just saw a friend of mine's new setup with one of your FMIC's. He said you guys met up somewhere in Marietta. I live maybe 10 min away from there, any chance you'd be willing to meet up so I can get in on this awesome deal. I'm just looking to purchase a FMIC (already have piping :/).

Let me know. If not then how much would shipping be to Conyers (shop where my car is at)?

EDIT: Also what is the availability on the stencils? I'm interested in the HDI stencil... would it come with the IC or could you guys use it to pre paint it b4 I pick it up or it ships?

ranger2339 · 10-15-2006, 07:19 AM

Yoooo i hope you still have some of these, i just sent payment for S13 redtop IC kit and HKS BOV adapter!!

Thanks
Josh Axel
[email protected]

hipro · 10-15-2006, 08:06 AM

Quote:

Originally Posted by vqboodah

can i buy just the S14 intercooler pipe kit itself? kit comes with all clamps, couplers, hotpipe, cold pipe etc right? i already have an intercooler. also, how much?

We are down to our very last S14 kit so, depending on how soon you want to purchase, we have one as of today. The piping is $250, including shipping to anywhere in the continental US via UPS Ground and includes everything you mentioned (does not include the intercooler and intercooler mounting brackets). Our next shipment is expected to arrive in 3 - 4 weeks and will include many more S14 kits. We currently have plenty of S13 SR, RB20/25, and CA18 kits in stock. Thanks, Mike Browning www.hiprollc.com 770-830-9242

hipro · 10-15-2006, 08:16 AM

Quote:

Originally Posted by MrBojangles

Hey I know this has been going on a long time but I just saw a friend of mine's new setup with one of your FMIC's. He said you guys met up somewhere in Marietta. I live maybe 10 min away from there, any chance you'd be willing to meet up so I can get in on this awesome deal. I'm just looking to purchase a FMIC (already have piping :/).

Let me know. If not then how much would shipping be to Conyers (shop where my car is at)?

EDIT: Also what is the availability on the stencils? I'm interested in the HDI stencil... would it come with the IC or could you guys use it to pre paint it b4 I pick it up or it ships?

For a limited time, we are offering the Hybrid Development International GTSpec intercoolers for $200, including FREE continental US delivery. For $25 more, we will include your choice of S13 or S14 stainless steel mounting brackets. You can place your order online at www.hiprollc.com. To get these prices, you must add the item to your shopping cart and, at checkout, enter the coupon code to mark down the retail price to the zilvia.net price. For the intercoolers, enter coupon code FMIC75, which reduces the price from $275 down to $200. We also accept PayPal ([email protected]) and credit cards over the phone. Georgia residents must pay 7% state sales tax.

If we can meet in the Marietta area for drop off, I can reduce the price by $10 to offset the shipping costs. Stencils are FREE; just remind me at purchase to put one in the box.

Thanks for your continued support. Mike Browning, Sales Manager, www.hiprollc.com, [email protected]
************************************************** ***
GTSpec Intercooler Specs: Made of T606T Aluminum, tested at >58 psi, flow rated at >800 cfm, core size is approx. 24x12x3 with 3" inlet/outlet with overal dimensions of approx. 31.5x12x3, weighs 15.2 lbs., manufacturer recommended for up to 750 horsepower applications.

hipro · 10-15-2006, 08:18 AM

Quote:

Originally Posted by ranger2339

Yoooo i hope you still have some of these, i just sent payment for S13 redtop IC kit and HKS BOV adapter!!

Thanks
Josh Axel
[email protected]

Got your order, Josh, so your S13 complete kit and HKS BOV adapter will ship tomorrow. Thanks, Mike B. www.hiprollc.com

ranger2339 · 10-15-2006, 08:25 AM

Thanks Mike..+1 for easy check out and the awsome discount, i had to get this kit what a deal..

Joah

s14rgs · 11-05-2006, 12:46 PM

Just sent you payment for an s13 kit with s14 mounting brackets and an hks bov adapter.

DrtyRat · 11-06-2006, 08:25 AM

Mike,
I just sent you payment for a hybrid gt spec IC...As usual great pricing/service!

hipro · 11-06-2006, 06:03 PM

Quote:

Originally Posted by DrtyRat

Mike,
I just sent you payment for a hybrid gt spec IC...As usual great pricing/service!

Thanks, Joe... it is on its way to you! Mike B.

hipro · 11-06-2006, 06:07 PM

Quote:

Originally Posted by ranger2339

Thanks Mike..+1 for easy check out and the awsome discount, i had to get this kit what a deal..

Joah

Joah... was the order in the name of Rory? Hope so, 'cause the kit shipped today. Thanks, Mike B.

TurbLu · 11-08-2006, 12:25 AM

Quote:

Originally Posted by hipro

Greetings Wntrcoatblu240... just for the record, we didn't change the kit; Hybrid did. We still offer both kits, but the old style is being discontinued. The new style is several pounds lighter and requires fewer couplers and t-bolt clamps. We are selling the new style about 10 to 1 over the old style, and many of those are wholesale accounts that have used both the old and new. Hybrid, like all other manufacturers, is constantly trying to improve both their products and their profitability... my guess is that a combination of those two is what drove the change. Thanks, Mike Browning www.hiprollc.com [email protected]

Off topic but to answer your question, a one piece pipe is better as it has less places to fail.

IDriveFords · 11-30-2006, 01:30 PM

Just trying to see if these guys are still around. I've tried calling and left a message. Just wanted to make sure the HKS flange would work with the SSQV (probably a stupid question) and also making sure you still have some s13 sr20det kits left. I'm ready to order both just waiting for a response to make sure your still around. Looking forward to doing business.

hipro · 12-01-2006, 03:02 AM

Quote:

Originally Posted by IDriveFords

...Just wanted to make sure the HKS flange would work with the SSQV (probably a stupid question) and also making sure you still have some s13 sr20det kits left...

Yes and YES! Your kit and BOV adapter are on their way. Thanks for your business! Mike B., www.hiprollc.com

IDriveFords · 12-05-2006, 08:48 PM

All I have to say about this kit is WOW! I just got it today and it looks amazing you cannot beat the pricing and service from this guy. Mike your awsome and thnx again for the great product and excellent service. This has been the smoothest and easiest transaction yet if your in the market for a great looking intercooler for an unbeatable price this is your man.

IDriveFords · 12-13-2006, 03:12 PM

just a quick question: how much hacking will I have to do to the bumper support to get this to fit/function right. I have the s13 setup and I'm getting ready to install it but I'm trying not to butcher my bumper support. Thnx
-Rob-

Dr. Moreau · 12-14-2006, 12:27 AM

do you have the 18" gt spec cores as well?

hipro · 12-15-2006, 03:44 PM

Quote:

Originally Posted by Dr. Moreau

do you have the 18" gt spec cores as well?

Sorry, but no... we just couldn't justify buying them in large quantities when the price was almost the same as the full sized core. Thanks, Mike B. www.hiprollc.com

hipro · 12-15-2006, 03:59 PM

Quote:

Originally Posted by IDriveFords

just a quick question: how much hacking will I have to do to the bumper support to get this to fit/function right. I have the s13 setup and I'm getting ready to install it but I'm trying not to butcher my bumper support. Thnx
-Rob-

Rob... I always use an angle grinder to cut the bumper as shown in the photo below. I measure just wider than the width of the intercooler and go down just over half way in the back. I then use a sledge hammer to "forcefully" fold the metal forward, with some effort, and then tack weld it back to provide support. Some people remove the support altogether, but I prefer to leave it in place. Hope this helps. Thanks, Mike B. www.hiprollc.com

Dr. Moreau · 12-16-2006, 11:23 PM

makes sense. i was just wondering.

moss13 · 12-17-2006, 09:16 AM

I've seen these kits widely used in Australia

fromxtor · 12-17-2006, 09:43 AM

looking for just the cold pipe for a S13 SR

hipro · 12-17-2006, 06:15 PM

Quote:

Originally Posted by fromxtor

looking for just the cold pipe for a S13 SR

Just the cold pipe is $125 shipped; with the single 90 degree silicone coupler and two t-bolt clamps is $150 shipped. Thanks, Mike B. [email protected], www.hiprollc.com

chlatboy · 02-20-2007, 10:17 PM

Mike, sorry to ressurect this thread but i was wondering if you guys made a cold pipe for the rb25det greddy manifold? One with a BOV flange on it already?

dreaMervaj · 02-21-2007, 01:47 AM

Got me wondering, no KA kits?

Clearalbino · 02-21-2007, 02:07 AM

What size is the piping?

scottie · 02-24-2007, 09:15 AM

I was wondering if anyone has pics of the install with the "NEW" intercooler piping setup. I looks like the instructions on their website shows the old intercooler piping installed in a S13 chassis. Just trying to figure out what the actual new intercooler piping looks like installed.

Scott

hipro · 02-26-2007, 06:12 PM

Quote:

Originally Posted by chlatboy

Mike, sorry to ressurect this thread but i was wondering if you guys made a cold pipe for the rb25det greddy manifold? One with a BOV flange on it already?

Sorry, but we only sell the "off the shelf" products made by Hybrid, and they do not offer it. Thanks, Mike B.

10-14-2006, 08:41 PM	#64
MrBojangles Leaky Injector Join Date: Mar 2005 Location: Metro-Atl Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	Hey I know this has been going on a long time but I just saw a friend of mine's new setup with one of your FMIC's. He said you guys met up somewhere in Marietta. I live maybe 10 min away from there, any chance you'd be willing to meet up so I can get in on this awesome deal. I'm just looking to purchase a FMIC (already have piping :/). Let me know. If not then how much would shipping be to Conyers (shop where my car is at)? EDIT: Also what is the availability on the stencils? I'm interested in the HDI stencil... would it come with the IC or could you guys use it to pre paint it b4 I pick it up or it ships? __________________ Old Project: Black on Gold S14. Ka-T 8 PSI. 255whp/254ft.lbs

11-30-2006, 01:30 PM	#75
IDriveFords Leaky Injector Join Date: Jun 2006 Location: VA Posts: 56 Trader Rating: (0) Feedback Score: 0 reviews	s13 sr20det Just trying to see if these guys are still around. I've tried calling and left a message. Just wanted to make sure the HKS flange would work with the SSQV (probably a stupid question) and also making sure you still have some s13 sr20det kits left. I'm ready to order both just waiting for a response to make sure your still around. Looking forward to doing business.

12-13-2006, 03:12 PM	#78
IDriveFords Leaky Injector Join Date: Jun 2006 Location: VA Posts: 56 Trader Rating: (0) Feedback Score: 0 reviews	install s13 just a quick question: how much hacking will I have to do to the bumper support to get this to fit/function right. I have the s13 setup and I'm getting ready to install it but I'm trying not to butcher my bumper support. Thnx -Rob-

12-14-2006, 12:27 AM	#79
Dr. Moreau Zilvia Member Join Date: May 2004 Location: La Place, LA Age: 35 Posts: 223 Trader Rating: (0) Feedback Score: 0 reviews	do you have the 18" gt spec cores as well? __________________ Squirrel '91 240SX Hatch Redtop SR since March 2006

12-16-2006, 11:23 PM	#82
Dr. Moreau Zilvia Member Join Date: May 2004 Location: La Place, LA Age: 35 Posts: 223 Trader Rating: (0) Feedback Score: 0 reviews	makes sense. i was just wondering. __________________ Squirrel '91 240SX Hatch Redtop SR since March 2006

10-13-2006, 03:47 PM	#63
vqboodah Zilvia Addict Join Date: Apr 2006 Location: MA Posts: 601 Trader Rating: (20) Feedback Score: 20 reviews	can i buy just the S14 intercooler pipe kit itself? kit comes with all clamps, couplers, hotpipe, cold pipe etc right? i already have an intercooler. also, how much?

10-15-2006, 07:19 AM	#65
ranger2339 Zilvia Junkie Join Date: May 2006 Location: MINNESOTA Age: 40 Posts: 520 Trader Rating: (1) Feedback Score: 1 reviews	Yoooo i hope you still have some of these, i just sent payment for S13 redtop IC kit and HKS BOV adapter!! Thanks Josh Axel [email protected]

10-15-2006, 08:25 AM	#69
ranger2339 Zilvia Junkie Join Date: May 2006 Location: MINNESOTA Age: 40 Posts: 520 Trader Rating: (1) Feedback Score: 1 reviews	Thanks Mike..+1 for easy check out and the awsome discount, i had to get this kit what a deal.. Joah

11-05-2006, 12:46 PM	#70
s14rgs Join Date: Nov 2005 Location: london, ky Posts: 19 Trader Rating: (0) Feedback Score: 0 reviews	Just sent you payment for an s13 kit with s14 mounting brackets and an hks bov adapter.

12-05-2006, 08:48 PM	#77
IDriveFords Leaky Injector Join Date: Jun 2006 Location: VA Posts: 56 Trader Rating: (0) Feedback Score: 0 reviews	All I have to say about this kit is WOW! I just got it today and it looks amazing you cannot beat the pricing and service from this guy. Mike your awsome and thnx again for the great product and excellent service. This has been the smoothest and easiest transaction yet if your in the market for a great looking intercooler for an unbeatable price this is your man.

12-17-2006, 09:16 AM	#83
moss13 Join Date: Sep 2006 Location: Atl Posts: 18 Trader Rating: (0) Feedback Score: 0 reviews	I've seen these kits widely used in Australia

12-17-2006, 09:43 AM	#84
fromxtor Post Whore! Join Date: Aug 2005 Location: NC Age: 40 Posts: 3,012 Trader Rating: (23) Feedback Score: 23 reviews	looking for just the cold pipe for a S13 SR __________________ Seller feedback>>http://www.zilvia.net/f/showthread.p...light=fromxtor

02-20-2007, 10:17 PM	#86
chlatboy Zilvia FREAK! Join Date: Aug 2004 Location: Somewhere Posts: 1,252 Trader Rating: (0) Feedback Score: 0 reviews	Mike, sorry to ressurect this thread but i was wondering if you guys made a cold pipe for the rb25det greddy manifold? One with a BOV flange on it already? __________________ If you dont know SEARCH!!!

02-21-2007, 01:47 AM	#87
dreaMervaj Zilvia Addict Join Date: Aug 2005 Location: SC Posts: 866 Trader Rating: (18) Feedback Score: 18 reviews	Got me wondering, no KA kits?

02-21-2007, 02:07 AM	#88
Clearalbino Zilvia Member Join Date: Sep 2005 Location: Seattle, WA Age: 33 Posts: 197 Trader Rating: (3) Rides Gallery: Clearalbino Feedback Score: 3 reviews	What size is the piping?

02-24-2007, 09:15 AM	#89
scottie Zilvia FREAK! Join Date: Nov 2003 Location: asluT Posts: 1,287 Trader Rating: (11) Feedback Score: 11 reviews	I was wondering if anyone has pics of the install with the "NEW" intercooler piping setup. I looks like the instructions on their website shows the old intercooler piping installed in a S13 chassis. Just trying to figure out what the actual new intercooler piping looks like installed. Scott

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode