Cont-Passive Belt Module - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

JDM_eightSIX · 06-05-2008, 12:35 PM

Hey guys I am trying to figure out what this module is and if it will hurt anything if I remove it? I assume its for the seat belts seeing it says Cont-Passive Belt. If thats the case I have no factory seat belt hardware in the car anymore, everything was removed. Hopefully you can help me out. Sorry for the crappy pictures I took them with my iPhone.

AKADriver · 06-05-2008, 12:52 PM

Yes, that's the controller for the automatic seat belts.

Yes, you can remove it if you have swapped to manual belts or harnesses. Drop it on the floor just for the satisfaction of ignoring the warning.

JDM_eightSIX · 06-05-2008, 01:11 PM

Quote:

Originally Posted by AKADriver

Yes, that's the controller for the automatic seat belts.

Yes, you can remove it if you have swapped to manual belts or harnesses. Drop it on the floor just for the satisfaction of ignoring the warning.

Thats funny because I said I was going to do that if it wasnt needed.

But its not going to affect anything? I cant tell seeing their all wrapped together but the wires that run down the middle of the picture have 2 sets of wires breaking off going to the shifter. Is that anything pertaining to the module?

projectRDM · 06-05-2008, 05:08 PM

Remove it. Leave the plugs taped up right where they are. You're not affecting anything.

g6civcx · 06-06-2008, 09:14 AM

I have removed the seatbelt ECU. I also followed every single wire and removed all unnecessary wires from the harness. Anything that doesn't Tee off to something else can be clipped and sealed.

Then I threw away all Nissan wiring and did my own custom wiring. Much simpler and easier to troubleshoot because I designed it.

JDM_eightSIX · 06-06-2008, 03:23 PM

Quote:

Originally Posted by g6civcx

I have removed the seatbelt ECU. I also followed every single wire and removed all unnecessary wires from the harness. Anything that doesn't Tee off to something else can be clipped and sealed.

Then I threw away all Nissan wiring and did my own custom wiring. Much simpler and easier to troubleshoot because I designed it.

Yeah that's kinda the route I'm going to be taking. Clean it all up and get rid of unnecessary wires.

06-05-2008, 12:35 PM	#1
JDM_eightSIX Leaky Injector Join Date: Jan 2007 Location: Franklin, WI Age: 34 Posts: 81 Trader Rating: (4) Feedback Score: 4 reviews	Cont-Passive Belt Module Hey guys I am trying to figure out what this module is and if it will hurt anything if I remove it? I assume its for the seat belts seeing it says Cont-Passive Belt. If thats the case I have no factory seat belt hardware in the car anymore, everything was removed. Hopefully you can help me out. Sorry for the crappy pictures I took them with my iPhone.

06-05-2008, 05:08 PM	#4
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 47 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Remove it. Leave the plugs taped up right where they are. You're not affecting anything. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-05-2008, 12:52 PM	#2
AKADriver Post Whore! Join Date: May 2002 Location: Springfield, VA Age: 39 Posts: 3,112 Trader Rating: (0) Feedback Score: 0 reviews	Yes, that's the controller for the automatic seat belts. Yes, you can remove it if you have swapped to manual belts or harnesses. Drop it on the floor just for the satisfaction of ignoring the warning.

06-06-2008, 09:14 AM	#5
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5) Feedback Score: 5 reviews	I have removed the seatbelt ECU. I also followed every single wire and removed all unnecessary wires from the harness. Anything that doesn't Tee off to something else can be clipped and sealed. Then I threw away all Nissan wiring and did my own custom wiring. Much simpler and easier to troubleshoot because I designed it.