Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 12-13-2018, 06:46 PM   #1
synman95
 
Join Date: Dec 2018
Location: dayton ohio
Age: 26
Posts: 1
Trader Rating: (0)
synman95 is an unknown quantity at this point
Feedback Score: 0 reviews
240sx 89 sohc to dohc swap problems help!

Alright this is my first post on here and it wont be my last. Im swapping a dohc in to a 89 manual s13 and having power issues no ecu power no fuel power and no spark but engine turns over . i have swapped the dash plug over to the sohc plug on my dohc harness for some reason i have no power going to my ecu. the light wont turn on at all. I have checked the blue ecu plug and theres no power going to it only grounds. I have triple double checked the grounds for the harness and everything is correct. i have no idea what else to check i have checked all my relays and they work just fine. Any ideas on why my ecu isnt getting power? Im banging my head against the wall lol.
synman95 is offline   Reply With Quote
Sponsored Links
Old 12-14-2018, 03:11 AM   #2
Prince of Saiyans
 
Prince of Saiyans's Avatar
 
Join Date: Jan 2018
Location: Phoenix AZ
Age: 31
Posts: 32
Trader Rating: (2)
Prince of Saiyans is just really nicePrince of Saiyans is just really nicePrince of Saiyans is just really nicePrince of Saiyans is just really nicePrince of Saiyans is just really nicePrince of Saiyans is just really nicePrince of Saiyans is just really nicePrince of Saiyans is just really nice
Feedback Score: 2 reviews
Did you check for power and ground at all the pins? Print out a ecu pinout and double check. Check all the grounds. I know pin 46 should have power at all times. Even will the key out. If it doesn't check the fusible links in the fuse box. Then pin 47 and 38 are both power. Both are controlled by the eccs relay. Test the relay or jump it with a paper clip and see if the ecu lights up. See if you're getting anything a pin 34 WHILE cranking. Use a back probe for if you have some or a super thin paper clip. You said you check the grounds. What did you check for? Just that they are hooked up or did you ohm them out? Are all your grounds in the engine bay good? I've had a ecu not power up so we ran so a new ground and clean up the old ones. Then it turned on.
Heres the ecu wiring layout. Then just use google for the pinout.

https://nicoclub.com/archives/240sx-...locations.html

When I got my first 240 I downloaded the fsm and went to a fedex print place. Might want to think about doing that. Its nice having it on paper.
__________________
Prince of Saiyans is offline   Reply With Quote
Old 12-14-2018, 03:35 PM   #3
Jfornachon
Zilvia Junkie
 
Join Date: Dec 2011
Location: Caldwell Idaho
Posts: 300
Trader Rating: (3)
Jfornachon is an unknown quantity at this point
Feedback Score: 3 reviews
Find the wires that should have power and trace them back to the battery. Sounds like you have a fuse or a Relay problem.

have a great day,
jared
Jfornachon is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:25 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™