CA KA24DE,Fidanza flywheel,UR Pulley,Xcessive intake manifold,Koyo Radiator,Hotshot Hdr. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

om3ga · 06-07-2009, 02:27 AM

Ive got a ton of stuff im getting rid of from my KA build EVERYTHING is in MINT condition Everything is on the car right now, i will be pulling it all off when either ALL or the majority of the parts are sold. I am selling everything because i have decided to go SR instead of pulling this motor and rebuilding and doing KA-T.
All parts i bought brand new and have used very minimal, maybe 5k miles (nothing was beat on at all the car isnt driven too much or too hard it was just getting built up but i changed my mind on what i want to do)

KA24DE S13 Koyo Radiator (had a fine mesh grill protecting it so no bent fins unless they were bent from when it was taken out of the box)-$240 or OFFER

Xcessive Intake manifold-$400 or OFFER

Unorthodox Racing underdrive pulley(Discontinued)-$175 or OFFER

Hotshot header S13 KA24DE (dont know if it will fit S14? heard its rare)
$200 or OFFER

KA24DE Fidanza 11lb Flywheel-$250 or OFFER

Polished Shaved valve cover-$100 or OFFER
KA24DE Engine Long block, No intake manifold or exhaust manifold included. Has new waterpump,thermostat,valve cover gasket,oil pan gasket, Rear main seal and front main seal. Runs strong it has 200k miles but has had royal purple oil changes every 3000 miles along with K&N Oil filters and it hasnt been abused much (never redlined I am the 2nd owner of it so i know this for a fact)comes with harness and ecu and 5spd tranny which has also had royal purple fluid changed regularly and new rear seal.-$500 or OFFER

Here is a pic of the engine bay

NISMO_tuner · 06-07-2009, 02:43 AM

pics?
interested in intake manifold, and maybe pulleys if they are complete set

om3ga · 06-07-2009, 02:48 AM

Its only the crank pulley sorry.

2prestige · 06-07-2009, 07:44 AM

pmed you.......

jarredd · 06-07-2009, 11:19 AM

clean engine bay, free bump for you

shanes14 · 06-07-2009, 11:39 AM

nice i/m. wish i wasnt broke. bump

strongbads240 · 06-07-2009, 11:58 AM

pm sent..

Ger240 · 06-07-2009, 12:00 PM

pmed you thanks

2toneluv · 06-07-2009, 12:39 PM

what kind of power gains did you get out of header, intake, and intake mani? pm me please

240sxvaj · 06-07-2009, 04:04 PM

good deals

glws

Pirate_Freder · 06-08-2009, 01:17 AM

good stuff man, I'm primarily focusing on just getting back on the road right now though. GLWS

heavenskrow · 06-08-2009, 10:24 AM

wait sorry if im dumb as fuck, but this is a setup for NA KA right?

redline240sx · 06-08-2009, 11:03 AM

pmed you....

om3ga · 06-09-2009, 09:23 PM

Quote:

Originally Posted by heavenskrow

wait sorry if im dumb as fuck, but this is a setup for NA KA right?

Parts for sale for it YES haha NA or turbo either way but my setup there is NA

Nezahualcoyotl · 06-09-2009, 09:42 PM

PM sent...

240sxvaj · 06-09-2009, 10:12 PM

how much power did you felt with the Xcessive Intake manifold installed?

bmar240sx · 06-09-2009, 10:20 PM

Quote:

Originally Posted by 240sxvaj

how much power did you felt with the Xcessive Intake manifold installed?

Yea i want to know too, did you feel a difference?

om3ga · 06-10-2009, 06:58 PM

Yes especially higher rpms

om3ga · 06-11-2009, 07:13 PM

I need this stuff sold asap any offers? lol

silpena · 06-11-2009, 08:20 PM

did u pass smog with the intake manifold? i could have sworn they delete alot of smog parts.

B_ren · 06-11-2009, 10:14 PM

do you still have the fly wheel ??

240sxvaj · 06-11-2009, 10:18 PM

Quote:

Originally Posted by om3ga

Yes especially higher rpms

explain, what rpm?

driftage240 · 06-11-2009, 10:27 PM

any pics of the header? also its along shot do u have matching strut bars? if so will u sell those too?

hotlavaflow · 06-13-2009, 06:55 PM

PM and Email sent

basicmods · 06-14-2009, 09:12 AM

man i wish i was local to CA, i would pick up the motor + tranny in a heartbeat. GLWS

Kaos_S13 · 06-15-2009, 10:23 AM

Is the motor still for sale?

jonnybonds84 · 06-15-2009, 07:30 PM

Pmed, you. Free stumps.

sc ka24e · 06-16-2009, 12:00 AM

asking for a particular power diffrence of one of his items is pretty useless as every component is a factor to the over all power gains. the combination of his parts working together for ex intake mani w 4-2-1 header obviously will reap more benifit and feel alot torquier and responsive but his flywheel and UR pully also make a noticable pick up in engines ability to rev faster ..soooooo,,... any damn intake manifold is better than that restrictive ass ka manifold.... so buy it..sorry for the rant,

s!lv!a · 06-16-2009, 12:54 AM

Quote:

Originally Posted by sc ka24e

asking for a particular power diffrence of one of his items is pretty useless as every component is a factor to the over all power gains. the combination of his parts working together for ex intake mani w 4-2-1 header obviously will reap more benifit and feel alot torquier and responsive but his flywheel and UR pully also make a noticable pick up in engines ability to rev faster ..soooooo,,... any damn intake manifold is better than that restrictive ass ka manifold.... so buy it..sorry for the rant,

actually the xcessive intake isn't that great for n/a ka.. its too big, if the liter size of the motor is smaller than the volume of your intake manifold on a low power n/a application like this, its actually not doing anything. the xcessive manifold was built specifically for turbo applications on the ka anyways, do some readup on ka-t.org and you'll understand what i'm talking about, it has been dyno proven. the butt dyno is probably all this manifold has seen. not trying to bash, but i just hate to see misinformation going around.. if you have a ka-t, buy this manifold, if not, i warned you..

glws man, good stuff, decent prices

ESmorz · 06-16-2009, 04:33 AM

$300 for just the long block?

06-07-2009, 02:27 AM	#1
om3ga Zilvia Addict Join Date: Jan 2007 Location: Up and Down! California Posts: 878 Trader Rating: (8) Feedback Score: 8 reviews	KA24DE,Fidanza flywheel,UR Pulley,Xcessive intake manifold,Koyo Radiator,Hotshot Hdr. Ive got a ton of stuff im getting rid of from my KA build EVERYTHING is in MINT condition Everything is on the car right now, i will be pulling it all off when either ALL or the majority of the parts are sold. I am selling everything because i have decided to go SR instead of pulling this motor and rebuilding and doing KA-T. All parts i bought brand new and have used very minimal, maybe 5k miles (nothing was beat on at all the car isnt driven too much or too hard it was just getting built up but i changed my mind on what i want to do) KA24DE S13 Koyo Radiator (had a fine mesh grill protecting it so no bent fins unless they were bent from when it was taken out of the box)-$240 or OFFER Xcessive Intake manifold-$400 or OFFER Unorthodox Racing underdrive pulley(Discontinued)-$175 or OFFER Hotshot header S13 KA24DE (dont know if it will fit S14? heard its rare) $200 or OFFER KA24DE Fidanza 11lb Flywheel-$250 or OFFER Polished Shaved valve cover-$100 or OFFER KA24DE Engine Long block, No intake manifold or exhaust manifold included. Has new waterpump,thermostat,valve cover gasket,oil pan gasket, Rear main seal and front main seal. Runs strong it has 200k miles but has had royal purple oil changes every 3000 miles along with K&N Oil filters and it hasnt been abused much (never redlined I am the 2nd owner of it so i know this for a fact)comes with harness and ecu and 5spd tranny which has also had royal purple fluid changed regularly and new rear seal.-$500 or OFFER Here is a pic of the engine bay Last edited by om3ga; 06-07-2009 at 02:47 AM..

06-07-2009, 02:43 AM	#2
NISMO_tuner Nissanaholic! Join Date: Apr 2008 Location: SoCal 818/562/714 Posts: 2,193 Trader Rating: (64) Feedback Score: 64 reviews	pics? interested in intake manifold, and maybe pulleys if they are complete set __________________ Check my for sale thread for S13 parts

06-11-2009, 10:27 PM	#23
driftage240 Post Whore! Join Date: Sep 2005 Location: TUJUNGA Age: 37 Posts: 2,869 Trader Rating: (23) Feedback Score: 23 reviews	any pics of the header? also its along shot do u have matching strut bars? if so will u sell those too? __________________ Misty blu is coming 4 you!

06-13-2009, 06:55 PM	#24
hotlavaflow Zilvia FREAK! Join Date: Jul 2007 Location: BKLYN NYC Posts: 1,263 Trader Rating: (23) Feedback Score: 23 reviews	PM and Email sent __________________

06-14-2009, 09:12 AM	#25
basicmods Zilvia Member Join Date: Mar 2006 Location: Dubuque, IA Age: 38 Posts: 183 Trader Rating: (3) Feedback Score: 3 reviews	man i wish i was local to CA, i would pick up the motor + tranny in a heartbeat. GLWS __________________ '91 240SX hatch complete with super rare sunroof insert and bag!

06-07-2009, 02:48 AM	#3
om3ga Zilvia Addict Join Date: Jan 2007 Location: Up and Down! California Posts: 878 Trader Rating: (8) Feedback Score: 8 reviews	Its only the crank pulley sorry.

06-07-2009, 07:44 AM	#4
2prestige Join Date: Oct 2008 Location: Socal Posts: 22 Trader Rating: (0) Feedback Score: 0 reviews	pmed you.......

06-07-2009, 11:19 AM	#5
jarredd Zilvia Member Join Date: Jun 2007 Location: Vista, CA (San Diego) Age: 35 Posts: 239 Trader Rating: (3) Feedback Score: 3 reviews	clean engine bay, free bump for you

06-07-2009, 11:39 AM	#6
shanes14 Zilvia Addict Join Date: Jul 2008 Location: florida Posts: 662 Trader Rating: (4) Feedback Score: 4 reviews	nice i/m. wish i wasnt broke. bump

06-07-2009, 11:58 AM	#7
strongbads240 Leaky Injector Join Date: May 2008 Location: socal Age: 33 Posts: 88 Trader Rating: (2) Feedback Score: 2 reviews	pm sent..

06-07-2009, 12:00 PM	#8
Ger240 Join Date: Feb 2009 Location: Escondido,Ca Age: 33 Posts: 31 Trader Rating: (0) Feedback Score: 0 reviews	pmed you thanks

06-07-2009, 12:39 PM	#9
2toneluv Zilvia Junkie Join Date: Oct 2008 Location: placerville CA Age: 31 Posts: 385 Trader Rating: (0) Feedback Score: 0 reviews	what kind of power gains did you get out of header, intake, and intake mani? pm me please

06-07-2009, 04:04 PM	#10
240sxvaj Nissanaholic! Join Date: Dec 2007 Location: So-Cal! Age: 31 Posts: 2,192 Trader Rating: (38) Feedback Score: 38 reviews	good deals glws

06-08-2009, 01:17 AM	#11
Pirate_Freder Zilvia Junkie Join Date: Mar 2007 Location: Roswell, NM Age: 33 Posts: 515 Trader Rating: (10) Feedback Score: 10 reviews	good stuff man, I'm primarily focusing on just getting back on the road right now though. GLWS

06-08-2009, 10:24 AM	#12
heavenskrow BANNED Join Date: May 2009 Location: Southern California Age: 33 Posts: 237 Trader Rating: (1) Feedback Score: 1 reviews	wait sorry if im dumb as fuck, but this is a setup for NA KA right?

06-08-2009, 11:03 AM	#13
redline240sx Zilvia Addict Join Date: Jun 2008 Location: Queens, NYC Posts: 706 Trader Rating: (9) Feedback Score: 9 reviews	pmed you....

06-09-2009, 09:42 PM	#15
Nezahualcoyotl Zilvia Addict Join Date: Oct 2006 Location: Santa Ana, California Age: 34 Posts: 769 Trader Rating: (16) Feedback Score: 16 reviews	PM sent...

06-09-2009, 10:12 PM	#16
240sxvaj Nissanaholic! Join Date: Dec 2007 Location: So-Cal! Age: 31 Posts: 2,192 Trader Rating: (38) Feedback Score: 38 reviews	how much power did you felt with the Xcessive Intake manifold installed?

06-10-2009, 06:58 PM	#18
om3ga Zilvia Addict Join Date: Jan 2007 Location: Up and Down! California Posts: 878 Trader Rating: (8) Feedback Score: 8 reviews	Yes especially higher rpms

06-11-2009, 07:13 PM	#19
om3ga Zilvia Addict Join Date: Jan 2007 Location: Up and Down! California Posts: 878 Trader Rating: (8) Feedback Score: 8 reviews	I need this stuff sold asap any offers? lol

06-11-2009, 08:20 PM	#20
silpena Zilvia Addict Join Date: Jan 2008 Location: LIVE OAK,CA Age: 34 Posts: 834 Trader Rating: (2) Feedback Score: 2 reviews	did u pass smog with the intake manifold? i could have sworn they delete alot of smog parts.

06-11-2009, 10:14 PM	#21
B_ren Leaky Injector Join Date: Jun 2009 Location: mission viejo ca Age: 30 Posts: 65 Trader Rating: (1) Feedback Score: 1 reviews	do you still have the fly wheel ??

06-15-2009, 10:23 AM	#26
Kaos_S13 Join Date: Sep 2008 Location: Santa Susana Field Lab Age: 35 Posts: 25 Trader Rating: (0) Feedback Score: 0 reviews	Is the motor still for sale?

06-15-2009, 07:30 PM	#27
jonnybonds84 Zilvia Addict Join Date: Feb 2008 Location: Dania Beach, FL Posts: 795 Trader Rating: (12) Feedback Score: 12 reviews	Pmed, you. Free stumps. __________________ *SPENCER DOUGHERTY* RIP ME OFF. SEARCH HIS REVIEW THREAD.

06-16-2009, 12:00 AM	#28
sc ka24e Zilvia Junkie Join Date: Apr 2005 Location: San Diego, CA/ Union city, CA Age: 34 Posts: 514 Trader Rating: (2) Feedback Score: 2 reviews	asking for a particular power diffrence of one of his items is pretty useless as every component is a factor to the over all power gains. the combination of his parts working together for ex intake mani w 4-2-1 header obviously will reap more benifit and feel alot torquier and responsive but his flywheel and UR pully also make a noticable pick up in engines ability to rev faster ..soooooo,,... any damn intake manifold is better than that restrictive ass ka manifold.... so buy it..sorry for the rant,

06-16-2009, 04:33 AM	#30
ESmorz Post Whore! Join Date: Oct 2007 Location: It Looks Like A Dong Posts: 6,902 Trader Rating: (2) Feedback Score: 2 reviews	$300 for just the long block? __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode