quick power steering clip/sensor explanation - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

dkim1985 · 06-14-2011, 03:51 PM

so earlier today i sent an e-mail to Chasebays.com because i was interested in their high pressure power steering hose(mines leaking).
here was my e-mail;

Quote:

Hello.

I have a 1991 Nissan 240sx fastback, stock everything.
I am interested in your High Pressure Power Steering Hose (CB-N-PS4)
Is this a direct OE replacement?

Also, on the OEM high pressure ps hose theres a little clip (see attached).
I notice your PS hose doesn't have this. Does your hose only replace the big hose?
If so, do you guys offer anything that'll replace that whole line? (i think i have a leak coming from that mid point..)

Thanks,

their response;

Quote:

Our hose is a full replacement. From the rack to the pump. That sensor is just to raise the idle 90-100 rpms when your turning. Everyone finds that annoying, so, unneeded!

im a noob when it comes to working on my engine so this was new information to me and i haven't heard this anywhere so i thought i'd post it just incase anybody was looking into their power steering and wondered what that clip/sensor was for.

thanks chasebays.com!

..but yes, my power steering is leaking. my friend calls my car 'humpty'..because there always seems to be something wrong with it.

<~~ i love this 'smilie' lol

godrifttoday · 06-14-2011, 04:18 PM

Expect a long waiting time ... According to some members which have ordered through them

dkim1985 · 06-14-2011, 04:48 PM

Quote:

Originally Posted by godrifttoday

Expect a long waiting time ... According to some members which have ordered through them

yeah, i've noticed..
but apparently they have it in stock at the moment so..hmm..we'll see.
trying to decide if i should order from them or just buy all the individual parts myself..
(referring to the complete Power Steering Kit they offer..)

dkim1985 · 06-15-2011, 12:11 PM

..just ordered mine with 2-day express shipping!

TypeXFan · 06-15-2011, 01:14 PM

Mine had a heavy leak when I bought the car, instead of dropping the money for a oe replacement I put in a little extra and bought the ISIS SS replacement. I eliminated the sensor and I am very happy with what I got.

dkim1985 · 06-15-2011, 01:23 PM

Quote:

Originally Posted by TypeXFan

Mine had a heavy leak when I bought the car, instead of dropping the money for a oe replacement I put in a little extra and bought the ISIS SS replacement. I eliminated the sensor and I am very happy with what I got.

yeah, i heard good things about the ISIS replacement. isn't chasebays.com pretty much the same 'high pressure hose'?

i got my car a couple months ago and started having problems with the fuel injectors so i changed those out and then found out soon after that there was a leak in the power steering. hopefully this kit will come in soon and i can get it all replaced this weekend~

TypeXFan · 06-15-2011, 01:33 PM

Dont know how the chasebays.com one is like, I just wanted to go with the SS line so I wouldnt have to deal with any cuts or rips in the line. Seeing how expensive the "high pressure line" can get, I didnt want to take any chances.

dkim1985 · 06-15-2011, 05:00 PM

Quote:

Originally Posted by TypeXFan

Dont know how the chasebays.com one is like, I just wanted to go with the SS line so I wouldnt have to deal with any cuts or rips in the line. Seeing how expensive the "high pressure line" can get, I didnt want to take any chances.

yeah, the chasebays kit includes an ss high pressure hose. i just want to replace the whole thing so i don't have to worry about the power steering again for awhile. once i get it i'll take pictures of the product itself and then how it looks installed.

Toi · 06-17-2011, 09:14 AM

Sweet, this thread just answered my question, as my sensor and plugs do not match up....Since its really not needed, on to the next issue!!!

dkim1985 · 06-17-2011, 09:44 AM

Quote:

Originally Posted by Toi

Sweet, this thread just answered my question, as my sensor and plugs do not match up....Since its really not needed, on to the next issue!!!

Yeah, I was going to just get the hoses from chasebays because I don't really need the reservoir..but was told the hoses don't work with the stock reservoir..so just decided to purchase the whole kit.

Big_E-Dog · 06-18-2011, 10:45 PM

wait i thought that that sensor was to drop the idle when your maxxed out to prevent unnecessary pressure on the hose

Toi · 06-19-2011, 02:36 AM

I found a wiki answers for it, says it raises idle speed or disengages A/C compressor to prevent the car from stalling......

Anything else I find seems to say the same thing.....

KiLLeR2001 · 06-19-2011, 02:38 AM

The purpose of the sensor is to raise the idle to prevent the engine from stalling, because an engine stall would make your power steering... well... not so powerful anymore

Toi · 06-19-2011, 06:10 AM

Quote:

Originally Posted by KiLLeR2001

The purpose of the sensor is to raise the idle to prevent the engine from stalling, because an engine stall would make your power steering... well... not so powerful anymore

I have no idea why and I apologize for the thread jack but this made me chuckle, all I could think was OVER 9000

dkim1985 · 06-20-2011, 12:37 PM

Quote:

Originally Posted by Toi

I have no idea why and I apologize for the thread jack but this made me chuckle, all I could think was OVER 9000

loll ..over 9000~!!!

..im a little disappointed with chasebays right now. not on the product (because i haven't received it yet) but the service..
i sent payment on wednesday with 2 days shipping so i can get it to install on saturday. 24 hours later, realized i never got a notification of payment received or shipped so i called..they told me that the payment was never received so the order was never processed..i told them thats incorrect because i sent the payment like 2 mins after i received the invoice. they called me back a few hours later saying the payment has been received but it was because nobody referenced the payment with the order...(whos fault is that..??)
so they said they'll ship it out the next day because it's too late to ship anything out that day(thursday).
so i called Friday morning to see if they can cover the difference of next day shipping ($20) because i told them the first time that i needed the product before Saturday..and they wouldn't because "it cost too much".......
that was just retarded..so i just said fine, i'll pay for it myself.
paid another $20 for next day shipping...only to find out my order is going to arrive Monday(today) instead of Saturday... ... ...

thanks chasebays~

will comment more once the product arrives..

PIN GIO 2 · 06-20-2011, 12:45 PM

chasebays service very suck!
chasebays product very good!
i ordered ps kits waited for almost 2 weeks.

dkim1985 · 06-20-2011, 02:14 PM

Quote:

Originally Posted by PIN GIO 2

chasebays service very suck!
chasebays product very good!
i ordered ps kits waited for almost 2 weeks.

i have a feeling im going to have similar feelings..
we'll see. just got a notice the product arrived.
will have it installed tomorrow morning..

PIN GIO 2 · 06-22-2011, 11:59 AM

Now I have small leak -10 AN fitting with a 90 deg fitting on the reservoir. i did installed correctly.... i did not use teflon tape and tighten it less than 15 lbs. i email them yesterday and no response.

dkim1985 · 06-22-2011, 12:47 PM

Quote:

Originally Posted by PIN GIO 2

Now I have small leak -10 AN fitting with a 90 deg fitting on the reservoir. i did installed correctly.... i did not use teflon tape and tighten it less than 15 lbs. i email them yesterday and no response.

good luck with that..lol

my mechanic installed the kit yesterday...but he ended up cutting one of the hoses to make it fit onto the OEM cooling line because he didn't know it was supposed to go straight to the rack...
now i'm left to decide if i should leave it the way he did it...or buy a replacement line...or have him connect the hose he cut with clamps and take out the oem cooling lines...hmm...

oh...and i failed smog last night..

GSXRJJordan · 06-22-2011, 01:37 PM

I'm happy Chasebays is so popular, it's always good to see small guys make new products and have them take hold.

I'm sorry to hear about so many customer service issues.

For their part, the answer is correct ~ the pressure sensor bumps idle to prevent stalling at full lock, when the power steering pump is putting the most strain on the accessory drive. I've never kept this feature, as stalling doesn't happen even with a light flywheel.

KiLLeR2001 · 06-22-2011, 05:46 PM

Quote:

Originally Posted by GSXRJJordan

For their part, the answer is correct ~ the pressure sensor bumps idle to prevent stalling at full lock, when the power steering pump is putting the most strain on the accessory drive. I've never kept this feature, as stalling doesn't happen even with a light flywheel.

For 3 years my power steering sensor was never hooked up, and my engine never stalled (Fidanza lightweight flywheel). However, it will dip down low causing a rough idle. I guess all you really gain from installing the sensor is a consistent smooth idle regardless of how you are turning the wheel. I finally installed it a few months ago and IMO any future swaps I do, I will have it hooked up.

dkim1985 · 06-22-2011, 09:00 PM

Quote:

Originally Posted by KiLLeR2001

For 3 years my power steering sensor was never hooked up, and my engine never stalled (Fidanza lightweight flywheel). However, it will dip down low causing a rough idle. I guess all you really gain from installing the sensor is a consistent smooth idle regardless of how you are turning the wheel. I finally installed it a few months ago and IMO any future swaps I do, I will have it hooked up.

my sensor is now disconnected because i have chasebays kit installed.
speaking of chasebays kit...my reservoir cap is leaking because theres a hole in it..apparenly the fix is to use a quarter... '-__- we'll see..
i think i'm going to have my mechanic redo the PS lines to connect directly to the rack..for some reason i don't trust the set up the way it is now.. =P

bladetech8 · 06-25-2011, 12:43 AM

-edit:

Nevermind, answered my own question.. Oh that search feature sure works like a charm..

lol

---> myself

06-14-2011, 04:18 PM	#2
godrifttoday Post Whore! Join Date: Jan 2004 Location: los angeles Age: 37 Posts: 3,120 Trader Rating: (82) Feedback Score: 82 reviews	Expect a long waiting time ... According to some members which have ordered through them __________________ NEED Bolt kits for your car?

06-15-2011, 12:11 PM	#4
dkim1985 Zilvia Addict Join Date: Apr 2011 Location: Gardena, CA Posts: 771 Trader Rating: (28) Feedback Score: 28 reviews	..just ordered mine with 2-day express shipping! __________________ FS: Nismo R-Tune Camshafts for VQ35DE.

06-18-2011, 10:45 PM	#11
Big_E-Dog Leaky Injector Join Date: Jul 2008 Location: San Diego Age: 36 Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	wait i thought that that sensor was to drop the idle when your maxxed out to prevent unnecessary pressure on the hose __________________ VG30ET Modded 2nd Gen Maxima

06-19-2011, 02:38 AM	#13
KiLLeR2001 Post Whore! Join Date: Jun 2007 Location: オーランドフロリダ Posts: 7,955 Trader Rating: (46) Feedback Score: 46 reviews	The purpose of the sensor is to raise the idle to prevent the engine from stalling, because an engine stall would make your power steering... well... not so powerful anymore __________________

06-22-2011, 01:37 PM	#20
GSXRJJordan Post Whore! Join Date: May 2006 Location: << 626 >> Posts: 9,135 Trader Rating: (19) Rides Gallery: GSXRJJordan Feedback Score: 19 reviews	I'm happy Chasebays is so popular, it's always good to see small guys make new products and have them take hold. I'm sorry to hear about so many customer service issues. For their part, the answer is correct ~ the pressure sensor bumps idle to prevent stalling at full lock, when the power steering pump is putting the most strain on the accessory drive. I've never kept this feature, as stalling doesn't happen even with a light flywheel. __________________ Jordan Innovations has a new web site! www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com

06-15-2011, 01:14 PM	#5
TypeXFan Leaky Injector Join Date: Jun 2010 Location: Fresno, CA Age: 39 Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Mine had a heavy leak when I bought the car, instead of dropping the money for a oe replacement I put in a little extra and bought the ISIS SS replacement. I eliminated the sensor and I am very happy with what I got.

06-15-2011, 01:33 PM	#7
TypeXFan Leaky Injector Join Date: Jun 2010 Location: Fresno, CA Age: 39 Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	Dont know how the chasebays.com one is like, I just wanted to go with the SS line so I wouldnt have to deal with any cuts or rips in the line. Seeing how expensive the "high pressure line" can get, I didnt want to take any chances.

06-17-2011, 09:14 AM	#9
Toi Zilvia Member Join Date: Aug 2010 Location: Japan Age: 44 Posts: 224 Trader Rating: (1) Feedback Score: 1 reviews	Sweet, this thread just answered my question, as my sensor and plugs do not match up....Since its really not needed, on to the next issue!!!

06-19-2011, 02:36 AM	#12
Toi Zilvia Member Join Date: Aug 2010 Location: Japan Age: 44 Posts: 224 Trader Rating: (1) Feedback Score: 1 reviews	I found a wiki answers for it, says it raises idle speed or disengages A/C compressor to prevent the car from stalling...... Anything else I find seems to say the same thing.....

06-20-2011, 12:45 PM	#16
PIN GIO 2 Zilvia FREAK! Join Date: Sep 2008 Location: Ontario, California Age: 31 Posts: 1,355 Trader Rating: (20) Feedback Score: 20 reviews	chasebays service very suck! chasebays product very good! i ordered ps kits waited for almost 2 weeks.

06-22-2011, 11:59 AM	#18
PIN GIO 2 Zilvia FREAK! Join Date: Sep 2008 Location: Ontario, California Age: 31 Posts: 1,355 Trader Rating: (20) Feedback Score: 20 reviews	Now I have small leak -10 AN fitting with a 90 deg fitting on the reservoir. i did installed correctly.... i did not use teflon tape and tighten it less than 15 lbs. i email them yesterday and no response.

06-25-2011, 12:43 AM	#23
bladetech8 Zilvia Addict Join Date: Jun 2010 Location: Southern California (LA/OC) Posts: 802 Trader Rating: (32) Feedback Score: 32 reviews	-edit: Nevermind, answered my own question.. Oh that search feature sure works like a charm.. lol ---> myself

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode