ka24de - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

itz matthew xP · 05-26-2011, 06:03 PM

hey guys, so i swapped out my old KA24de for another with 60k mile on it, and everything is hooked up with the egr removed and etc. main problem i can't get it to start! it cranks, it got fuel, and sparks. i sprayed starter fluid and thought of everything possible to get the motor fired up but still doesn't work. any ideas guys? i checked the fuel pump and it works possible the ecu?

waxball88 · 05-29-2011, 01:58 PM

Compression

562s13 · 05-30-2011, 06:16 PM

check your ground wires...

s13-ghost · 05-31-2011, 01:11 AM

maybe timing?

Prime · 05-31-2011, 04:15 AM

Did you set the distributor properly?

Nibras · 05-31-2011, 09:07 AM

ya im guessing your ignition timing , also what year is your 240 and what year is the motor from , if you have a s13 dizzy on a s14 it wont start

OoAtreyuloO · 05-31-2011, 06:27 PM

im gunna say timing since i had this problem

GoToast · 05-31-2011, 06:52 PM

either timing or MAF.
Nibras is right about the distributor. Also youll have to make sure thats alinged correctly with TDC and such.

05-26-2011, 06:03 PM	#1
itz matthew xP Zilvia Member Join Date: May 2009 Location: NYC if i tell you anymore i will need to kill you! Age: 33 Posts: 230 Trader Rating: (6) Feedback Score: 6 reviews	ka24de hey guys, so i swapped out my old KA24de for another with 60k mile on it, and everything is hooked up with the egr removed and etc. main problem i can't get it to start! it cranks, it got fuel, and sparks. i sprayed starter fluid and thought of everything possible to get the motor fired up but still doesn't work. any ideas guys? i checked the fuel pump and it works possible the ecu?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-29-2011, 01:58 PM	#2
waxball88 Zilvia FREAK! Join Date: Jun 2009 Location: Gainesville Posts: 1,061 Trader Rating: (9) Feedback Score: 9 reviews	Compression

05-30-2011, 06:16 PM	#3
562s13 Zilvia Junkie Join Date: Sep 2010 Location: norwalk Posts: 477 Trader Rating: (2) Feedback Score: 2 reviews	check your ground wires...

05-31-2011, 01:11 AM	#4
s13-ghost Zilvia Addict Join Date: Nov 2009 Location: Vista, CA Age: 29 Posts: 736 Trader Rating: (18) Feedback Score: 18 reviews	maybe timing?

05-31-2011, 04:15 AM	#5
Prime Zilvia Junkie Join Date: Mar 2004 Location: California Age: 36 Posts: 444 Trader Rating: (6) Feedback Score: 6 reviews	Did you set the distributor properly?

05-31-2011, 09:07 AM	#6
Nibras Zilvia Junkie Join Date: Mar 2009 Location: Orlando , FL Age: 31 Posts: 450 Trader Rating: (2) Feedback Score: 2 reviews	ya im guessing your ignition timing , also what year is your 240 and what year is the motor from , if you have a s13 dizzy on a s14 it wont start

05-31-2011, 06:27 PM	#7
OoAtreyuloO Zilvia Junkie Join Date: Feb 2011 Location: Compton Age: 31 Posts: 340 Trader Rating: (1) Feedback Score: 1 reviews	im gunna say timing since i had this problem

05-31-2011, 06:52 PM	#8
GoToast Leaky Injector Join Date: Mar 2009 Location: Stevensville Age: 33 Posts: 100 Trader Rating: (0) Feedback Score: 0 reviews	either timing or MAF. Nibras is right about the distributor. Also youll have to make sure thats alinged correctly with TDC and such.