Ga People Speak Up! - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

97DubTruck · 09-15-2004, 08:45 AM

yeah that was awesome. what i meant by the whole ka-t thing is most all of them have ka and were planning to do to ka turbo and always told me what shit sr20's are. i've gone to events with questions about 240s and just gone blown off with arrogance by most of the people in that club that i talked to. what the hell? i mean i had questions about swapping my motor and auto to 5 speed and i was promptly responded with "sr's are gay ka turbo has way more torque." what is that all about? not because i was a "noob" or even a "16 year old thug" but i was a guy that tried to be nice to everybody at the meets and actually meet new people to hang out with that have 240s. i had respect for them because sometimes they can be fun to discuss cars with at meets but when you get a lot of shit from them because you bought your car after they did or i wanted an sr, then they don't seem very open to new people. uggh if only my car was half as pimp as the cars in that club i would probably have a broke ass coupe with an oil consuming ka.the worst people have the worst cars too. it boils down to the car and what you have done to yours. i din't like the fact that a guy with a stock ass 240 would tell me i don't know a thing about 240s. who cares my car is fast, handles, and looks way better than theirs. the 97dubtruck is now done venting. exit blinding stupidity....

by the way i'm an 18 year old thug.

s14slider · 09-15-2004, 08:45 PM

and I am a 19 year old little bitch with more than 5 SR swaps under my belt, couple auto to 5 speed swaps, I am extremely familiar with the suspension and brakes on both S13 and S14 due to the fact that curbs are stupidly placed in my way of drifting, heheehe. HAHAHAHAHEHEHEE.

E&ERacing · 09-16-2004, 06:11 AM

Everyone going to Adretti's tommorrow night? We can all meet up there and either have a good time or bitch about how 240's over ATL don't seem to like noobs. Maybe we can do some drifting in the parking lot, as long as nobody throws any curbs in our way. I just replaced my quarter panel, so the car will be magnet to damage now. Also is it just me and everyone around here, but do ya'll have a lot of S14's driving around with busted up quarter panels? I got tired of seeing them, so I drille dmine out and replaced it. Now there are about 5 other S14's out in our area with busted up quarters, it seem S13's get busted up fenders. Anyways, I am 23 and have plenty of CA,SR, RB, and KAT's under my belt, I know alot but I don't know everything, and I learn something new all of the time. So everyone, I am tired of the 240 over ATL discussion, I am here to have fun, so we'll see ya'll tommorrow. Jay, your 240 looks awesome, can't wait to see it in person, Brandon, I am sure I have met you before, if not, see you tommorrow.

Eric
www.e-emotorsports.com
678-770-4516

Phoen_x_s14 · 09-16-2004, 09:15 AM

Heh I got a somewhat busted fender and a rear quarter panel busted near the back bumber on the right side. You said you drilled it out? If your bringing your car, mind if I take a look at the work you did?

s14slider · 09-16-2004, 02:53 PM

Eric, I am just giving you a hard time. I personally don't care about 240's over Atlanta. I have MANY, MANY friends with 240's and I am just wanting to have some fun with everybody. I would much rather go out and do some drifting than sit around and talk shit. Oh well, I guess I will see you guys tomorrow! c-ya

-Brandon

E&ERacing · 09-16-2004, 02:58 PM

As long as this rain stops we should have a good time. Just finishing up my rear quarter right now so everything should be in order on my car. Phoen_x_s14, replacing the rear quarter is a fucking bitch, I'll bring it tommorrow and explain more in detail on it.

See ya'll tommorrow.

Eric

Phoen_x_s14 · 09-16-2004, 03:18 PM

Yeah I would think it would be a pain in the ass to work on. Phuck it, I'ma just slap over some wide body fenders over my battle scars then.

Brandon, sent you a PM.

97DubTruck · 09-17-2004, 06:38 AM

the hurricane wasn't too bad i could still slide around yesterday. shawn (orange hatch) showed me and brandon (s14unimog) a new spot in gainesville thats real badass. nothing around. shaped like a staple. i don't really even consider myself a drifter but it was plenty fun. hopefully i can make it down tonight. i'll try my hardest.

Crim · 09-26-2004, 08:11 AM

Hey fellas, don't flame me because I don't own a 240 (although I used to have an s13 several years ago), but I do have an SR20 powered vechicle

Over the past couple months I've been putting together a new website geared towards the SR20/Nissan enthusiast crowd here in Atlanta. I am hoping to compile information on both the FWD and RWD SR20 platforms, including swap writeups etc...

I have a basic website setup now, including a web forum over at http://www.atl-sr20.com/.

The website is still a work in progress, so expect more to come as I get time to work on it.

s14slider · 09-27-2004, 05:20 PM

Yo Eric, I did not get to meet you at the Andretti's meet-up. So, since everyone is getting busted for just trying to meet up, I am going to talk to the managers of Dave and Buster's in Gwinnett (off of Steve Reynold's I believe?) and see if we can meet up out there just to hang out and talk to each other. I am planning on setting this up on Sat. the 9th in October. The time of the meet-up will be 10:30 PM. We should be allowed to be there for a while, but I would prefer everyone to be there around that time, so we can make the most out of it. I will keep everyone informed on how well this turns out w/ the management there.

Hope this works out and hope to see everyone there!
-Brandon Reed

Neejay · 12-21-2004, 10:32 AM

I know this is from September, but are there any up-coming dates/events to which we can meet up again?

I dont have much done to my car, but it would be cool to meet some other 240 owners. I live in Rex (alongside Stockbridge on the Henry County/Clayton County lines). I dont know anyone else whos into modding or at least has a decent knowledge of cars around here.

bleach8484 · 12-21-2004, 09:09 PM

Im a little late to jump in...

But im Brandon, 20, from Macon

95 240sx se - S13 redtop soon to be installed
Weisco pistons, Cometic 1.0mm headgasket, All new OEM nissan bearings, valve seals, and misc gaskets and seals, Greddy valve springs, RAS, ARP rod bolts and Head studs. All built by me. ACT Stage 3 clutch, Presicion 750hp intercooler, custom 2.5" intercooler piping (yet to be made by myself) Greddy RS BOV, and dont forget the custom Gunmetal Valve cover and Carbon insert.

Tein springs for now. And i have 2 Volk GT-C's, waitin on the money to order the other 2

Hopefully this will be all together soon after the new year. Then maybe i can make that ride up and meet some of yall.

Neejay · 12-22-2004, 12:20 AM

Damm, I'd swear you people are rich. Its like people pull money out their asses man lol. I guess Im comparing my situation to others though.

nsany(atl) · 12-23-2004, 05:52 AM

Im in Smyrna, but I need to sell my Sil-80 ASAP, someone buy it. Let me know about a meet.

http://www.autotrader.com/fyc/vdp.js...lor=&cardist=0

bleach8484 · 12-23-2004, 05:52 PM

I dont pull $ out of my ass, I just live at home for free, and work 55-60 hours a week.

E&ERacing · 12-23-2004, 08:21 PM

Whenever we wanna get something together, lets do it. I'm up for it whenever, we're just moving into our new shop now.

Eric

silviadriftr · 02-17-2005, 11:25 AM

Just saw this thread. Shows how long it's been since I've been on here. I'm Brian-- 1993 silvia.

rdoggins · 03-03-2005, 07:25 AM

what up!! you were always a snail just not the Silvia j/k

Columbus, GA
When this thread was going I had a 90 240sx SR 323rwhp.

turbotractor97 · 03-03-2005, 09:49 AM

hey

just got the s13 fastback black
sr20det
and a tranny grind- sigh

jvladamir · 07-14-2005, 05:49 PM

Jesse Bragg
Augusta, GA
706-726-2443
1995 240sx
KA-t on the way (shut-up, it really is on the way, i only need a few more things)
3in test
3in pipe
sum cheap intake
NGK
17"s & Toyo's

Finally got my 240 about 2.5 months ago, wanted one for 5+ yrs since i could drive. turbo soon if i can only keep a descent job.
DEFINITELY up for a meet, would like to research your car and copy you exactly. Hit me up if in area.

s14slider · 07-15-2005, 11:04 AM

Let me make some phone calls and see when a good day (or night) is for everyone to meet up. The only place that we have received permission to meet up at is Dave and Busters off of Steve Reynolds in duluth/gwinnett co. So, let me know what you guys think about meeting there in about a month or so. We might make it a couple months from now, just so we can make sure everyone is there, know what I mean? Oh well.

plv · 07-26-2005, 12:58 PM

Peter, 18, Marietta, GA

1989 240sx SE (hatchback) - stock sohc KA with 3in catback

, JIC coilovers on the front, HKS coilovers on the back, camber plates, strut bars, c-pillar bar, 5-lug conversion, z32 brakes all the way around, r32 rear subframe with vlsd, shortshifter, dual friction clutch, 16x8 front/17x9 back BBS RS meshwheels, 180sx side/rear skirts.

i also have a lot of dents and scratches, roof was spray painted flat black by previous owner, bubbled up purple shit on my windows, and a sticker thingie on my trunk that says "Drift King"

got my car about a week ago, im looking forward to meeting other 240 guys

MrBojangles · 08-06-2005, 09:20 PM

Hey guys whats up. Kinda new to zilvia but been on 240sxforums for 8 months or so.

My name is Matt, 17, Woodstock, GA.

fairly stock Black 96 S14 se -
- D2 Coilovers
- B&M Short shifter
- Injen sr intake
- Apex'i N1 catback
- Enkei OR52 (16x7.5 +38) w/ Falken Ziex512 225/50's
Thats it for current mods... Currently piecing together my custom KA-T kit which should be on by october-ish. I don't really care where we meet. I'm up for anywhere really. I live in NW metro atl so over to gwinett is pretty far but its cool with me.

Atljunglist · 08-19-2005, 10:23 AM

Whats up guys. My name is Andy I have a green S14 w/ an Sr20 swap T28 BB etc. My car is currently beign worked on by Eric @ EEMotorsports. Hes putting in my 550's, Safc, and dyno tuning it. I live in Gwinnett and am ready for a 240 meet. If you guys come up with a date email me at [email protected] or gimme a call @ (678)478-2639

01SaturnL200 · 09-03-2005, 09:28 AM

sup guys, anybody here from the oakwood area, i think that is around gainsville, i dunno im gonna be staying up here for a lil bit and i was wonderin if u guys hang out alot, im not sure where alot of stuff is up here, so i usually go cruise around at night.... pm me if u guys wanna meet up

NISxMO · 09-04-2005, 10:26 PM

Whats up guys, my name is Matt. Im new to zilvia though I am pretty active at club240. I just bought the car a few weeks ago so havent started really modding it besides a stage two clutch and short shifter that Im about to order from E&E this week. I would be interested in a meet, let me know thanks!

BlazedGlory · 09-05-2005, 09:10 AM

hoochiscrazy · 09-05-2005, 01:56 PM

hey saturn, are you going to send my part or give me my money back? youve been ignoring my pms for a while. it sounds like you are doing fine and you shouldnt be using this as an excuse to rip people off.

01SaturnL200 · 09-05-2005, 03:18 PM

Quote:

Originally Posted by hoochiscrazy

hey saturn, are you going to send my part or give me my money back? youve been ignoring my pms for a while. it sounds like you are doing fine and you shouldnt be using this as an excuse to rip people off.

lol ya doin fine....all i have right now are 3 shirts 2 pants and my car...everything else was lost in the hurricane... when i get some money ill send u how ever much i owe u back....dont worry....its not my fault i could save anything else...

hoochiscrazy · 09-05-2005, 05:12 PM

all i wanted was a response, from the other post you made, it sounded like things werent that bad for you. dont worry about the money.

09-15-2004, 08:45 PM	#32
s14slider Join Date: Feb 2004 Location: Atlanta, GA Posts: 227 Trader Rating: (0) Feedback Score: 0 reviews	and I am a 19 year old little bitch with more than 5 SR swaps under my belt, couple auto to 5 speed swaps, I am extremely familiar with the suspension and brakes on both S13 and S14 due to the fact that curbs are stupidly placed in my way of drifting, heheehe. HAHAHAHAHEHEHEE. __________________ Rising Sun Auto - coming soon!!! Last edited by s14slider; 12-19-2004 at 08:35 PM.. Reason: ?

09-16-2004, 09:15 AM	#34
Phoen_x_s14 Zilvia Junkie Join Date: Sep 2003 Location: ATL, GA Age: 38 Posts: 311 Trader Rating: (0) Feedback Score: 0 reviews	Heh I got a somewhat busted fender and a rear quarter panel busted near the back bumber on the right side. You said you drilled it out? If your bringing your car, mind if I take a look at the work you did? __________________

09-16-2004, 02:53 PM	#35
s14slider Join Date: Feb 2004 Location: Atlanta, GA Posts: 227 Trader Rating: (0) Feedback Score: 0 reviews	Eric, I am just giving you a hard time. I personally don't care about 240's over Atlanta. I have MANY, MANY friends with 240's and I am just wanting to have some fun with everybody. I would much rather go out and do some drifting than sit around and talk shit. Oh well, I guess I will see you guys tomorrow! c-ya -Brandon __________________ Rising Sun Auto - coming soon!!!

09-16-2004, 03:18 PM	#37
Phoen_x_s14 Zilvia Junkie Join Date: Sep 2003 Location: ATL, GA Age: 38 Posts: 311 Trader Rating: (0) Feedback Score: 0 reviews	Yeah I would think it would be a pain in the ass to work on. Phuck it, I'ma just slap over some wide body fenders over my battle scars then. Brandon, sent you a PM. __________________

09-26-2004, 08:11 AM	#39
Crim Join Date: Feb 2004 Location: Marietta - Atlanta, GA Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	Hey fellas, don't flame me because I don't own a 240 (although I used to have an s13 several years ago), but I do have an SR20 powered vechicle Over the past couple months I've been putting together a new website geared towards the SR20/Nissan enthusiast crowd here in Atlanta. I am hoping to compile information on both the FWD and RWD SR20 platforms, including swap writeups etc... I have a basic website setup now, including a web forum over at http://www.atl-sr20.com/. The website is still a work in progress, so expect more to come as I get time to work on it. __________________ 1990 2+2 300zx (VG30DETT in progress) 1992 Sentra Se-R (SR20DE-T) ATL-SR20.Com Last edited by Crim; 08-25-2011 at 04:27 PM..

09-15-2004, 08:45 AM	#31
97DubTruck Zilvia Junkie Join Date: Sep 2003 Location: location, location Posts: 532 Trader Rating: (0) Feedback Score: 0 reviews	yeah that was awesome. what i meant by the whole ka-t thing is most all of them have ka and were planning to do to ka turbo and always told me what shit sr20's are. i've gone to events with questions about 240s and just gone blown off with arrogance by most of the people in that club that i talked to. what the hell? i mean i had questions about swapping my motor and auto to 5 speed and i was promptly responded with "sr's are gay ka turbo has way more torque." what is that all about? not because i was a "noob" or even a "16 year old thug" but i was a guy that tried to be nice to everybody at the meets and actually meet new people to hang out with that have 240s. i had respect for them because sometimes they can be fun to discuss cars with at meets but when you get a lot of shit from them because you bought your car after they did or i wanted an sr, then they don't seem very open to new people. uggh if only my car was half as pimp as the cars in that club i would probably have a broke ass coupe with an oil consuming ka.the worst people have the worst cars too. it boils down to the car and what you have done to yours. i din't like the fact that a guy with a stock ass 240 would tell me i don't know a thing about 240s. who cares my car is fast, handles, and looks way better than theirs. the 97dubtruck is now done venting. exit blinding stupidity.... by the way i'm an 18 year old thug.

09-16-2004, 06:11 AM	#33
E&ERacing Join Date: Feb 2004 Location: Georgia Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Everyone going to Adretti's tommorrow night? We can all meet up there and either have a good time or bitch about how 240's over ATL don't seem to like noobs. Maybe we can do some drifting in the parking lot, as long as nobody throws any curbs in our way. I just replaced my quarter panel, so the car will be magnet to damage now. Also is it just me and everyone around here, but do ya'll have a lot of S14's driving around with busted up quarter panels? I got tired of seeing them, so I drille dmine out and replaced it. Now there are about 5 other S14's out in our area with busted up quarters, it seem S13's get busted up fenders. Anyways, I am 23 and have plenty of CA,SR, RB, and KAT's under my belt, I know alot but I don't know everything, and I learn something new all of the time. So everyone, I am tired of the 240 over ATL discussion, I am here to have fun, so we'll see ya'll tommorrow. Jay, your 240 looks awesome, can't wait to see it in person, Brandon, I am sure I have met you before, if not, see you tommorrow. Eric www.e-emotorsports.com 678-770-4516

09-16-2004, 02:58 PM	#36
E&ERacing Join Date: Feb 2004 Location: Georgia Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	As long as this rain stops we should have a good time. Just finishing up my rear quarter right now so everything should be in order on my car. Phoen_x_s14, replacing the rear quarter is a fucking bitch, I'll bring it tommorrow and explain more in detail on it. See ya'll tommorrow. Eric

09-17-2004, 06:38 AM	#38
97DubTruck Zilvia Junkie Join Date: Sep 2003 Location: location, location Posts: 532 Trader Rating: (0) Feedback Score: 0 reviews	the hurricane wasn't too bad i could still slide around yesterday. shawn (orange hatch) showed me and brandon (s14unimog) a new spot in gainesville thats real badass. nothing around. shaped like a staple. i don't really even consider myself a drifter but it was plenty fun. hopefully i can make it down tonight. i'll try my hardest.

09-27-2004, 05:20 PM	#40
s14slider Join Date: Feb 2004 Location: Atlanta, GA Posts: 227 Trader Rating: (0) Feedback Score: 0 reviews	Yo Eric, I did not get to meet you at the Andretti's meet-up. So, since everyone is getting busted for just trying to meet up, I am going to talk to the managers of Dave and Buster's in Gwinnett (off of Steve Reynold's I believe?) and see if we can meet up out there just to hang out and talk to each other. I am planning on setting this up on Sat. the 9th in October. The time of the meet-up will be 10:30 PM. We should be allowed to be there for a while, but I would prefer everyone to be there around that time, so we can make the most out of it. I will keep everyone informed on how well this turns out w/ the management there. Hope this works out and hope to see everyone there! -Brandon Reed __________________ Rising Sun Auto - coming soon!!!

12-21-2004, 10:32 AM	#41
Neejay Post Whore! Join Date: Jan 2004 Location: lol Age: 35 Posts: 2,586 Trader Rating: (2) Rides Gallery: Neejay Feedback Score: 2 reviews	I know this is from September, but are there any up-coming dates/events to which we can meet up again? I dont have much done to my car, but it would be cool to meet some other 240 owners. I live in Rex (alongside Stockbridge on the Henry County/Clayton County lines). I dont know anyone else whos into modding or at least has a decent knowledge of cars around here.

12-21-2004, 09:09 PM	#42
bleach8484 Zilvia Member Join Date: Dec 2004 Location: Atlanta Age: 36 Posts: 155 Trader Rating: (0) Feedback Score: 0 reviews	Im a little late to jump in... But im Brandon, 20, from Macon 95 240sx se - S13 redtop soon to be installed Weisco pistons, Cometic 1.0mm headgasket, All new OEM nissan bearings, valve seals, and misc gaskets and seals, Greddy valve springs, RAS, ARP rod bolts and Head studs. All built by me. ACT Stage 3 clutch, Presicion 750hp intercooler, custom 2.5" intercooler piping (yet to be made by myself) Greddy RS BOV, and dont forget the custom Gunmetal Valve cover and Carbon insert. Tein springs for now. And i have 2 Volk GT-C's, waitin on the money to order the other 2 Hopefully this will be all together soon after the new year. Then maybe i can make that ride up and meet some of yall.

12-22-2004, 12:20 AM	#43
Neejay Post Whore! Join Date: Jan 2004 Location: lol Age: 35 Posts: 2,586 Trader Rating: (2) Rides Gallery: Neejay Feedback Score: 2 reviews	Damm, I'd swear you people are rich. Its like people pull money out their asses man lol. I guess Im comparing my situation to others though.

12-23-2004, 05:52 AM	#44
nsany(atl) Zilvia Junkie Join Date: Mar 2003 Location: Smyrna,GA Posts: 346 Trader Rating: (5) Feedback Score: 5 reviews	Im in Smyrna, but I need to sell my Sil-80 ASAP, someone buy it. Let me know about a meet. http://www.autotrader.com/fyc/vdp.js...lor=&cardist=0 __________________ '92 C-West Sil/80 SR *SOLD* '95 Track car

12-23-2004, 05:52 PM	#45
bleach8484 Zilvia Member Join Date: Dec 2004 Location: Atlanta Age: 36 Posts: 155 Trader Rating: (0) Feedback Score: 0 reviews	I dont pull $ out of my ass, I just live at home for free, and work 55-60 hours a week.

12-23-2004, 08:21 PM	#46
E&ERacing Join Date: Feb 2004 Location: Georgia Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Whenever we wanna get something together, lets do it. I'm up for it whenever, we're just moving into our new shop now. Eric __________________ WWW.E-EMOTORSPORTS.COM

02-17-2005, 11:25 AM	#47
silviadriftr Leaky Injector Join Date: Oct 2003 Location: DOUGLASVILLE, GA Posts: 81 Trader Rating: (0) Feedback Score: 0 reviews	Just saw this thread. Shows how long it's been since I've been on here. I'm Brian-- 1993 silvia. __________________ UNLIMITED PERFORMANCE WWW.TURBODAVE.COM http://www.mountainboost.com/415/silvia.wmv Record holding-473whp-sr20det stock cams and bottom end

03-03-2005, 07:25 AM	#48
rdoggins Join Date: Nov 2003 Location: Columbus, GA Age: 41 Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	what up!! you were always a snail just not the Silvia j/k Columbus, GA When this thread was going I had a 90 240sx SR 323rwhp.

03-03-2005, 09:49 AM	#49
turbotractor97 Leaky Injector Join Date: Feb 2005 Location: atl Posts: 55 Trader Rating: (0) Feedback Score: 0 reviews	hey just got the s13 fastback black sr20det and a tranny grind- sigh

07-14-2005, 05:49 PM	#50
jvladamir Leaky Injector Join Date: Jun 2005 Location: Augusta, GA Age: 35 Posts: 58 Trader Rating: (0) Feedback Score: 0 reviews	Jesse Bragg Augusta, GA 706-726-2443 1995 240sx KA-t on the way (shut-up, it really is on the way, i only need a few more things) 3in test 3in pipe sum cheap intake NGK 17"s & Toyo's Finally got my 240 about 2.5 months ago, wanted one for 5+ yrs since i could drive. turbo soon if i can only keep a descent job. DEFINITELY up for a meet, would like to research your car and copy you exactly. Hit me up if in area.

07-15-2005, 11:04 AM	#51
s14slider Join Date: Feb 2004 Location: Atlanta, GA Posts: 227 Trader Rating: (0) Feedback Score: 0 reviews	Let me make some phone calls and see when a good day (or night) is for everyone to meet up. The only place that we have received permission to meet up at is Dave and Busters off of Steve Reynolds in duluth/gwinnett co. So, let me know what you guys think about meeting there in about a month or so. We might make it a couple months from now, just so we can make sure everyone is there, know what I mean? Oh well. __________________ Rising Sun Auto - coming soon!!!

07-26-2005, 12:58 PM	#52
plv Join Date: Jul 2005 Location: marietta, ga Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Peter, 18, Marietta, GA 1989 240sx SE (hatchback) - stock sohc KA with 3in catback , JIC coilovers on the front, HKS coilovers on the back, camber plates, strut bars, c-pillar bar, 5-lug conversion, z32 brakes all the way around, r32 rear subframe with vlsd, shortshifter, dual friction clutch, 16x8 front/17x9 back BBS RS meshwheels, 180sx side/rear skirts. i also have a lot of dents and scratches, roof was spray painted flat black by previous owner, bubbled up purple shit on my windows, and a sticker thingie on my trunk that says "Drift King" got my car about a week ago, im looking forward to meeting other 240 guys Last edited by plv; 08-07-2005 at 10:56 PM..

08-06-2005, 09:20 PM	#53
MrBojangles Leaky Injector Join Date: Mar 2005 Location: Metro-Atl Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	Hey guys whats up. Kinda new to zilvia but been on 240sxforums for 8 months or so. My name is Matt, 17, Woodstock, GA. fairly stock Black 96 S14 se - - D2 Coilovers - B&M Short shifter - Injen sr intake - Apex'i N1 catback - Enkei OR52 (16x7.5 +38) w/ Falken Ziex512 225/50's Thats it for current mods... Currently piecing together my custom KA-T kit which should be on by october-ish. I don't really care where we meet. I'm up for anywhere really. I live in NW metro atl so over to gwinett is pretty far but its cool with me. __________________ Old Project: Black on Gold S14. Ka-T 8 PSI. 255whp/254ft.lbs

08-19-2005, 10:23 AM	#54
Atljunglist Leaky Injector Join Date: Nov 2004 Location: ATL Age: 40 Posts: 103 Trader Rating: (0) Feedback Score: 0 reviews	Whats up guys. My name is Andy I have a green S14 w/ an Sr20 swap T28 BB etc. My car is currently beign worked on by Eric @ EEMotorsports. Hes putting in my 550's, Safc, and dyno tuning it. I live in Gwinnett and am ready for a 240 meet. If you guys come up with a date email me at [email protected] or gimme a call @ (678)478-2639

09-03-2005, 09:28 AM	#55
01SaturnL200 Banned from the Marketplace Join Date: Sep 2003 Location: Slidell LA Age: 36 Posts: 859 Trader Rating: (0) Feedback Score: 0 reviews	sup guys, anybody here from the oakwood area, i think that is around gainsville, i dunno im gonna be staying up here for a lil bit and i was wonderin if u guys hang out alot, im not sure where alot of stuff is up here, so i usually go cruise around at night.... pm me if u guys wanna meet up

09-04-2005, 10:26 PM	#56
NISxMO Join Date: Sep 2005 Location: Powder Springs Age: 32 Posts: 6 Trader Rating: (0) Feedback Score: 0 reviews	Whats up guys, my name is Matt. Im new to zilvia though I am pretty active at club240. I just bought the car a few weeks ago so havent started really modding it besides a stage two clutch and short shifter that Im about to order from E&E this week. I would be interested in a meet, let me know thanks! __________________ IMG exceeds forum limits of 400w x 200h

09-05-2005, 09:10 AM	#57
BlazedGlory Zilvia Junkie Join Date: Jan 2003 Location: Canton, GA Posts: 370 Trader Rating: (1) Feedback Score: 1 reviews	Justin Canton, GA '90 Black Nissan 240SX Hatch S13 SR20DET Swap\|Wahlbro 255lph Fuel Pump\|Koyo Aluminum Radiator\|Custom FMIC\|Greddy Type S BOV\|Rocker Arm Stoppers\|Metal Head Gasket\|3-Inch Turbo-Back Exhaust\|Apex'i N1 Muffler\|KYB Struts\|Eibach Springs\|Greddy Profec-B Spec-II EBC\|Apex'i SAFC-II\|Innovate Motorsports LM-1 Wideband O2\|Boost, AFR, Oil Pressure Gauges\|LS Automotive 180mph Speedometer Uninstalled Parts Collection Building ARP Exhaust Manifold Studs\|Nismo Adjustable FPR\|HKS SSQV BOV w/ Purple Insert\|Topspeed Intake Manifold\|PeakBoost Turbo Manifold\|Tial 38MM Wastegate (.7bar/10.25psi spring)\|Deatschwerks 700cc Injectors\|Z32 (300zx) MAF\|Greddy Valvesprings\|ARP Head Studs\|ARP Main Studs\|Crower Titanium Valvespring Retainers\|Eagle Connecting Rods\|CP Pistons\|HKS Step 2 264 Cams\|Urethane Motor/Tranny Mounts\|Oversized Oil Pan\|Exedy Hyper Single Items Not Yet Purchased Precision SC-5031E Turbo\|Enthalpy ROM-Tuned ECU I hope to get all of the Uninstalled Parts moved to the Installed Parts list within a couple of weeks after I finish buying the turbo and gaskets, and whatnot. To avoid an extremely laggy turbo, I've dropped my hp goal down from high 400s to low to mid 400s at the wheels =P. We'll see what happens - I'm pretty excited.

09-05-2005, 01:56 PM	#58
hoochiscrazy Join Date: May 2005 Location: compton Posts: 25 Trader Rating: (0) Feedback Score: 0 reviews	hey saturn, are you going to send my part or give me my money back? youve been ignoring my pms for a while. it sounds like you are doing fine and you shouldnt be using this as an excuse to rip people off.

09-05-2005, 05:12 PM	#60
hoochiscrazy Join Date: May 2005 Location: compton Posts: 25 Trader Rating: (0) Feedback Score: 0 reviews	all i wanted was a response, from the other post you made, it sounded like things werent that bad for you. dont worry about the money.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode