Z32 brake question: Yes Ive read it, but i still need help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

NewS13Guy · 05-23-2009, 12:21 PM

Before I get flamed on by the entire Zilvia community, YES I've read the "definitive 300zx brake swap" but I still need help understanding it. I know its been covered a billion times but just need some help. Im going 5 lug and doing the brake conversion at the same time so I just want to double check everything before I start.

This will all be going on a 89 4 lug S13

This is what I have so far:

R33 Front Calipers with SS brake lines
Brembo D&S rotors
Z32 rear calipers with SS brake lines

This is what I plan on buying to complete 5 lug/brake upgrade

Ichiba 5 lug conversion hubs (front on back)
Z32 2+2 E-brake cables
Z32 BMC

Is this all I will need to complete the swap? Do I NEED the Z32 backing plate to install the ebrake??? Is there anything else someone recommends I purchase to make this go buy alot smoother. Thanks in advance.

Sileighty_85 · 05-23-2009, 03:33 PM

ummm yeah if you want an E-Brake then yes you need the Z32 E-Brake Assembly......

the Z32 calipers do not have an E-Brake assembly like the Stock rear calipers on S-chassis do.

DreamN · 05-23-2009, 03:41 PM

you need the complete e-brake assembly, not just the backing plate. seems like you didn't understand what you read.

gijoe69 · 05-23-2009, 03:48 PM

goto importnut.net has a good amount of resource on what it takes to install Z brakes into any S-chassis

Sileighty_85 · 05-23-2009, 03:50 PM

you need this shit if you want an E-Brake with the Z32 caliper set up

NewS13Guy · 05-23-2009, 04:00 PM

Quote:

Originally Posted by DreamN

you need the complete e-brake assembly, not just the backing plate. seems like you didn't understand what you read.

gijoe69, that was the website I read and still needed help on. Thanks anyway though.

Sileighty_85, I thought that was what I needed but wasnt sure. Thanks!

To Mr. Douche bag whom I quoted, I stated that in the OP.

DreamN · 05-23-2009, 04:10 PM

Douche bag? I stated the obvious and clearly did not insult you. I didn't read your entire post because it wasn't necessary.

Though I'll point out how much of an idiot you are by quoting the site you supposedly read.

Quote:

Parts Necessary

non-turbo Z32 e-brake/splash shield setup
non-turbo Z32 or S14 hubs if doing 5-lug swap
calipers
rotors
R33 skyline GT-S e-brake cables (swap here)
SPL Parts or PDM Racing SS brake lines

Note the red text in bold. How is it that a 24 year old male isn't capable of understanding what that means? I was illiterate to anything automotive when I bought my 240sx and I understood what that meant. It had already mentioned the e-brake cables, yet you felt it necessary to ask if the actual e-brake component were necessary. That's simply being to lazy to actually use your brain. It should have clicked just as easy as 2+2=4 to a 5 year old.

I'm not the "douche" who is to much of a fucktard to understand what is necessary for a brake upgrade that's been done for over a decade. You're the douche who felt to lazy to do proper research on the subject and needed to be spoon fed the information.

gijoe69 · 05-23-2009, 04:15 PM

hmm....i smell trouble....Admin's / Mods...please close thread.....b4 world war 3 happens in here lol

NewS13Guy · 05-23-2009, 04:39 PM

Quote:

Originally Posted by DreamN

Douche bag? I stated the obvious and clearly did not insult you. I didn't read your entire post because it wasn't necessary.

Though I'll point out how much of an idiot you are by quoting the site you supposedly read.

Note the red text in bold. How is it that a 24 year old male isn't capable of understanding what that means? I was illiterate to anything automotive when I bought my 240sx and I understood what that meant. It had already mentioned the e-brake cables, yet you felt it necessary to ask if the actual e-brake component were necessary. That's simply being to lazy to actually use your brain. It should have clicked just as easy as 2+2=4 to a 5 year old.

I'm not the "douche" who is to much of a fucktard to understand what is necessary for a brake upgrade that's been done for over a decade. You're the douche who felt to lazy to do proper research on the subject and needed to be spoon fed the information.

Kthanksbye. Mods please close.

HYPNOTIK · 05-23-2009, 06:20 PM

What front rotors do you have? Z32 rotors won't work with your R33 calipers.

1ZlowZ · 05-24-2009, 02:18 PM

Don't close yet... I have z32 allum, calipers... for front only. I just need rotors and the conversion lines right?

HYPNOTIK · 05-24-2009, 11:56 PM

Quote:

Originally Posted by 1ZlowZ

Don't close yet... I have z32 allum, calipers... for front only. I just need rotors and the conversion lines right?

Yes.

message length

***S14DB*** · 05-25-2009, 12:14 AM

Reading is Fun and Mental!

05-23-2009, 12:21 PM	#1
NewS13Guy Zilvia Addict Join Date: Jan 2008 Location: Charlotte NC Age: 36 Posts: 667 Trader Rating: (13) Feedback Score: 13 reviews	Z32 brake question: Yes Ive read it, but i still need help Before I get flamed on by the entire Zilvia community, YES I've read the "definitive 300zx brake swap" but I still need help understanding it. I know its been covered a billion times but just need some help. Im going 5 lug and doing the brake conversion at the same time so I just want to double check everything before I start. This will all be going on a 89 4 lug S13 This is what I have so far: R33 Front Calipers with SS brake lines Brembo D&S rotors Z32 rear calipers with SS brake lines This is what I plan on buying to complete 5 lug/brake upgrade Ichiba 5 lug conversion hubs (front on back) Z32 2+2 E-brake cables Z32 BMC Is this all I will need to complete the swap? Do I NEED the Z32 backing plate to install the ebrake??? Is there anything else someone recommends I purchase to make this go buy alot smoother. Thanks in advance.

05-23-2009, 03:33 PM	#2
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	ummm yeah if you want an E-Brake then yes you need the Z32 E-Brake Assembly...... the Z32 calipers do not have an E-Brake assembly like the Stock rear calipers on S-chassis do. __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online #/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

05-23-2009, 03:41 PM	#3
DreamN Post Whore! Join Date: Nov 2006 Location: SoCal - 818 Age: 36 Posts: 10,691 Trader Rating: (54) Rides Gallery: DreamN Feedback Score: 54 reviews	you need the complete e-brake assembly, not just the backing plate. seems like you didn't understand what you read. __________________ - Jimmy Wanted: TBD For Sale: TBD

05-23-2009, 03:50 PM	#5
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	you need this shit if you want an E-Brake with the Z32 caliper set up __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online #/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

05-23-2009, 06:20 PM	#10
HYPNOTIK Zilvia Addict Join Date: Apr 2008 Location: Pisa, Italy Posts: 700 Trader Rating: (3) Feedback Score: 3 reviews	What front rotors do you have? Z32 rotors won't work with your R33 calipers. __________________

05-23-2009, 03:48 PM	#4
gijoe69 Zilvia Junkie Join Date: May 2003 Location: San Francisco, CA Age: 36 Posts: 366 Trader Rating: (1) Feedback Score: 1 reviews	goto importnut.net has a good amount of resource on what it takes to install Z brakes into any S-chassis

05-23-2009, 04:15 PM	#8
gijoe69 Zilvia Junkie Join Date: May 2003 Location: San Francisco, CA Age: 36 Posts: 366 Trader Rating: (1) Feedback Score: 1 reviews	hmm....i smell trouble....Admin's / Mods...please close thread.....b4 world war 3 happens in here lol

05-24-2009, 02:18 PM	#11
1ZlowZ Zilvia Addict Join Date: Mar 2008 Location: Apple Valley Age: 28 Posts: 649 Trader Rating: (1) Feedback Score: 1 reviews	Don't close yet... I have z32 allum, calipers... for front only. I just need rotors and the conversion lines right? __________________ -Victor S.

05-25-2009, 12:14 AM	#13
*S14DB* AFC #1 Join Date: Oct 2003 Location: 昨晩あなたのお母さんの家 Posts: 20,181 Trader Rating: (3) Feedback Score: 3 reviews	Reading is Fun and Mental! __________________ Comments should be taken as Opinions not as Statements of Fact

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode