s13 5 lug hub bearings - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

revenn · 08-23-2013, 03:19 PM

Hey guys I have been searching for this for a while and I cant seem to find an answer and the ones I have found confuse me. So I have a 90 s13 just went 5 lug with s14 hubs but the bearings are a bit loose and Id like to change them. What bearings should I get and how can I get them in there. I read something that said I was fucked if I didn't have the s14 control arms and that I would just have to buy new hubs? But that doesn't seem right.

Sorry If I did miss this. Thanks for the help!

blackrms13 · 08-23-2013, 03:35 PM

so you have s14 5 lug hub all around, but no s14 FLCA and etc?

revenn · 08-23-2013, 03:38 PM

correct all stuff is just s13 stock stuff

Rich260z · 08-23-2013, 03:44 PM

So someone just sent you s14 hubs? no spindle? and is it mostly loose in the front?

revenn · 08-23-2013, 03:46 PM

the rears have spindles but the fronts dont need them? right?

revenn · 08-23-2013, 03:47 PM

and yes the front ones are loose rears are good

Rich260z · 08-23-2013, 03:50 PM

The rears are knuckles, the the spindles are in the front. You need s14 spindles since they have the correct diameter for the s14 hubs. Also if you use the s14 spindle you have to use an s14 flca because the balljoint taper is different.

So whoever sold it to you either withheld info, lied to you, or assumed you just needed the hubs.

revenn · 08-23-2013, 03:52 PM

I mean the hubs fit over the axle and it spins freely?

blackrms13 · 08-23-2013, 04:00 PM

rear s14 hubs you can just slap on

front s14 hubs you need all the spindle/FLCA etc to fit properly...
that's why lots of manufacture makes s13 conversion hubs for the front only...

revenn · 08-23-2013, 04:02 PM

god damn it....what is a good kit to get for front hubs

Rich260z · 08-23-2013, 04:05 PM

Contano, they are in the forsale section and are fairly cheap and quality. $125 for the front pair. Maybe more now.

I used them in the front and have put about 7k miles on them, they work great. Most of the mileage was from FL to CA and there wasn't a single issue.

revenn · 08-23-2013, 04:06 PM

and I dont need anything else besides rotors correct?

blackrms13 · 08-23-2013, 06:06 PM

do some research...

revenn · 08-23-2013, 06:34 PM

yup just looked em up not bad good price pretty solid reviews.

Thanks for the help guys really appreciate it!

08-23-2013, 03:19 PM	#1
revenn Leaky Injector Join Date: Mar 2012 Location: denver Age: 31 Posts: 67 Trader Rating: (0) Feedback Score: 0 reviews	s13 5 lug hub bearings Hey guys I have been searching for this for a while and I cant seem to find an answer and the ones I have found confuse me. So I have a 90 s13 just went 5 lug with s14 hubs but the bearings are a bit loose and Id like to change them. What bearings should I get and how can I get them in there. I read something that said I was fucked if I didn't have the s14 control arms and that I would just have to buy new hubs? But that doesn't seem right. Sorry If I did miss this. Thanks for the help! __________________

08-23-2013, 03:35 PM	#2
blackrms13 Post Whore! Join Date: Jul 2007 Location: 626 Posts: 2,591 Trader Rating: (21) Feedback Score: 21 reviews	so you have s14 5 lug hub all around, but no s14 FLCA and etc? __________________ 91' 240sx Fastback LE

08-23-2013, 03:38 PM	#3
revenn Leaky Injector Join Date: Mar 2012 Location: denver Age: 31 Posts: 67 Trader Rating: (0) Feedback Score: 0 reviews	correct all stuff is just s13 stock stuff __________________

08-23-2013, 03:46 PM	#5
revenn Leaky Injector Join Date: Mar 2012 Location: denver Age: 31 Posts: 67 Trader Rating: (0) Feedback Score: 0 reviews	the rears have spindles but the fronts dont need them? right? __________________

08-23-2013, 03:47 PM	#6
revenn Leaky Injector Join Date: Mar 2012 Location: denver Age: 31 Posts: 67 Trader Rating: (0) Feedback Score: 0 reviews	and yes the front ones are loose rears are good __________________

08-23-2013, 03:44 PM	#4
Rich260z Zilvia Addict Join Date: Apr 2011 Location: Burbank, CA Posts: 621 Trader Rating: (8) Feedback Score: 8 reviews	So someone just sent you s14 hubs? no spindle? and is it mostly loose in the front?

08-23-2013, 03:50 PM	#7
Rich260z Zilvia Addict Join Date: Apr 2011 Location: Burbank, CA Posts: 621 Trader Rating: (8) Feedback Score: 8 reviews	The rears are knuckles, the the spindles are in the front. You need s14 spindles since they have the correct diameter for the s14 hubs. Also if you use the s14 spindle you have to use an s14 flca because the balljoint taper is different. So whoever sold it to you either withheld info, lied to you, or assumed you just needed the hubs.

08-23-2013, 03:52 PM	#8
revenn Leaky Injector Join Date: Mar 2012 Location: denver Age: 31 Posts: 67 Trader Rating: (0) Feedback Score: 0 reviews	I mean the hubs fit over the axle and it spins freely? __________________

08-23-2013, 04:00 PM	#9
blackrms13 Post Whore! Join Date: Jul 2007 Location: 626 Posts: 2,591 Trader Rating: (21) Feedback Score: 21 reviews	rear s14 hubs you can just slap on front s14 hubs you need all the spindle/FLCA etc to fit properly... that's why lots of manufacture makes s13 conversion hubs for the front only... __________________ 91' 240sx Fastback LE

08-23-2013, 04:02 PM	#10
revenn Leaky Injector Join Date: Mar 2012 Location: denver Age: 31 Posts: 67 Trader Rating: (0) Feedback Score: 0 reviews	god damn it....what is a good kit to get for front hubs __________________

08-23-2013, 04:05 PM	#11
Rich260z Zilvia Addict Join Date: Apr 2011 Location: Burbank, CA Posts: 621 Trader Rating: (8) Feedback Score: 8 reviews	Contano, they are in the forsale section and are fairly cheap and quality. $125 for the front pair. Maybe more now. I used them in the front and have put about 7k miles on them, they work great. Most of the mileage was from FL to CA and there wasn't a single issue.

08-23-2013, 04:06 PM	#12
revenn Leaky Injector Join Date: Mar 2012 Location: denver Age: 31 Posts: 67 Trader Rating: (0) Feedback Score: 0 reviews	and I dont need anything else besides rotors correct? __________________

08-23-2013, 06:06 PM	#13
blackrms13 Post Whore! Join Date: Jul 2007 Location: 626 Posts: 2,591 Trader Rating: (21) Feedback Score: 21 reviews	do some research... __________________ 91' 240sx Fastback LE

08-23-2013, 06:34 PM	#14
revenn Leaky Injector Join Date: Mar 2012 Location: denver Age: 31 Posts: 67 Trader Rating: (0) Feedback Score: 0 reviews	yup just looked em up not bad good price pretty solid reviews. Thanks for the help guys really appreciate it! __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode