tweakin2442

i have a s13 and put a s14 ka24de motor into it now everything runs fine. put for the longest time i was running on all 4 cylinders. well the problem was i wasnt getting singal to injector 1 so i wired it to injector 2 so im running on 4 cylinders again. now im not sure if that was the right thing to do or not. but now since ive done that when im driving and trying to get past 4k the engine cuts out and sometime the engine will die when im at the light and wont start for 10mins or so. i took my mult meter to the ecu for injector 1 and its not getting signal from the ecu. now like i said it ran fine well besides being on 3 cylinders before i did this, any suggestions