hipro

For a very limited time, we are offering your choice of SR20DET (S13, S14, or S15) or RB20/25DET kits (pictures below) at a delivered price of $375 (to anywhere in the continental US)!!!! Once these kits are gone, we probably will not be able to get anymore. Prices have gone up and our profits are no longer making it worth our time and effort to keep these kits in stock. To get these prices, add one of our kits to your shopping cart and, at checkout, enter coupon code FMIC50, which drops the price from $425 down to $375. We are very limited on CA18DET kits so this special does not apply to those kits. Thanks for your support. Mike Browning, Sales Manager, www.hiprollc.com. [email protected] 770-830-9242
S13 SR20DET Kit


S14/15 SR20DET Kit


RB20/25DET Kit

Blackparade

Hmmmm.....The RB20 kit looks very enticing....

speedgod^s13

How much to get it shipped to 96816?

Creizai

How can I buy some more "L" Silicon Pipes? I've got into 2 drift crashes and its held up great but I really need to make sure I got a backup.

jrmiller84

I am currently running the SR kit, good stuff. Definitely worth $375.

__________________
BitDestroyer.com

hipro

Extra $25 via USPS Priority Mail, for a total of $400. Thanks, Mike B. [email protected] 770-830-9242

hipro

We keep them in stock, red, blue, or black. With no clamps, just the 90 degree couplers, the price is $20 for one, $35 for two; both prices include US shipping. Thanks, Mike B. [email protected] 77-830-9242

nismo-joe

i own one of these kits deff nice stuff, is it just me or were the clamps too small for the outlet of the intercooler with the coupler on it?

__________________

jrmiller84

Wasn't just you, mine were too small too, not to mention they have an odd clamping mechanism that makes them even tougher to clamp. I just went to the parts store and bought some really large air-box clamps. They were quite a bit larger and made it a lot easier. They cost under $10, not bad.

__________________
BitDestroyer.com

hipro

The only tight fit that I have seen is with the S14 kits and the aluminum elbow. They should have included a 3" clamp instead of the 2 3/4" clamp. If you ordered a kit and need for this clamp to be replaced with the proper size, I will send one ASAP at no charge. Hybrid has made a change, swapping the aluminum elbow for a silicone elbow on the latest design. Thanks, Mike B. [email protected]

lonelydrifter

Damn I should have waited!!! All well awesome looking kit can't wait to put it on.

Creizai

The clamps work fine you just have to clamp them in the middle and then move them over. Its annoying but they hold up AMAZING. Again two Crashes if this was a greddy the metal Elbow would have cracked and I wouldn't have been able to drive home from the events at all.

I'll Email you about them. Thanks!

scottie

Damn Mike! I just spoke with you too about a week ago on the black couplers. How much are they going up? This means people wont have any other option but the Japanese brands which are probably made by the same company. Dang i need to call you soon and get one on lock down.

Scott

hipro

No worries Scott... we will have one for you when you are ready!

s14sport

im interested in this...is the RB kit for engine swaps with the stock intake manifold? or would it fit with greddy intake??

hipro

Out of the box, for the stock swap. I have been told that the cold (crossover) pipe can be cut and re-welded for use with the Greddy intake but I have not done that (can't afford the Greddy intake). Thanks, Mike B. www.hiprollc.com

cgtdream

Might sound like a dumb question, but what BOV's can be fitted on the cold pipes without modification?

__________________
Juicy slayin aint easy, but dammit somebody has to do it!!!

hipro

The HDI S13 kit uses a BOV connector on the HOT pipe, designed to be used with a BOV adapter (shown below), although many people (especially shops) cut off the connector and weld on the BOV adapter. We keep adapters in stock for Greddy R/S/RS and HKS SSQV style BOVs for an additional $40. The S14 kits uses a similar connection as the stock fitting, which allows the stock BOV to be used or any other brand with the right sized coupler. The RB kits are designed to take advantage of the stock BOV design on the intake connector. Thanks, Mike B. [email protected]

YoungRookie

Is it possible to buy just the cold side pipe, the one that goes from throttle body to intercooler?

__________________
92 Hatch, KA-T, T28, 12 PSI, FMIC, 3" TBE, EFI ECU, 440cc Inj, And more...

hipro

Sure... is it for the S13, S14, RB, or CA kit? Prices vary slightly depending on the kit. Do you need just the pipe, or couplers and clamps as well? Thanks, Mike B [email protected]

YoungRookie

I only need the pipe. Its for an s13 with an sr

__________________
92 Hatch, KA-T, T28, 12 PSI, FMIC, 3" TBE, EFI ECU, 440cc Inj, And more...

hipro

$100 for just the pipe, including shipping to PA. For $125, I will include the 90 degree silicone coupler and 2, 3" clamps. This pipe is sized to work with a 3" intercooler outlet. You can send payment via paypal to [email protected] or call and I will take credit card info over the phone. Thanks, Mike B. [email protected] 770-830-9242

YoungRookie

I already have the 90 degree coupler and clamps because i already bought the whole kit. But my cold pipe ended up getting fucked up so i guess i need to buy a new one.

__________________
92 Hatch, KA-T, T28, 12 PSI, FMIC, 3" TBE, EFI ECU, 440cc Inj, And more...

Coolwhip

I just got my kit for my RB25 and all I can say is WOW.

The quality and the appearance of EVERYTHING is top notch. I can't believe anyone would go with anything else especially for the price. I am COMPLETELY satisfied with my purchase and give a BIG THUMBS UP to these guys and their products.

Also the black couplers are the baller if you get a chance to upgrade.

when i get pictures of the motor in and installed with the FMIC I'll post pics.

again, awesome stuff, Thanks!

scottie

Mike,
Thank you for making my purchase simple and pain free! The quality of this fmic kit is amazing! I cannot believe the price you are selling these for. I almost feel like I ripped you off ....... All i can say is this intercooler looks better than my old VSpec Greddy for half the price. I opted for the black couplers which are so nice! Anyways, enough rambling, you all want to see pictures!!






The finish and hardware are top notch. I also think the TBolt clamps are beefy as well. Best bang for the buck! I feel sorry for any people who dont pick one up before you sell out. Thanks Mike!

Scott

hipro

Thanks, Scott and Coolwhip/Ricky, for the kind words. We think this is the best bang for the buck on the market, too, and your feedback helps confirm that. 100% customer satisfaction is our goal, or your money back! Mike Browning, Sales Manager, www.hiprollc.com, [email protected]

crescendo

Is there an option for the black couplers on the site somewhere or must I give Mike B. a call? Is there any data of measured pressure drop at a given boost level and at what HP is this S14/S15 kit rated? Much thanks!

slow40

just picked up one..should be here in a week...thx again man

hipro

Actually, should be in by Wednesday... will ship tomorrow (Monday) and no more than 2 days for delivery to TN. Thanks!

hipro

Sorry, but the colors have not been added to the website... laziness on my part. Once you order, shoot me an email and remind me about the color choice. Click this link for info on intercooler pressure drop and horsepower ratings, http://www.hybrid-power.com/images_p...ntercooler.JPG, which is on the Hybrid website. Thanks, Mike B. www.hiprollc.com [email protected]