SR S13 Upper Engine harness problems - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

blacklable245 · 04-20-2008, 03:08 PM

OK so a few weeks ago i went to start up my car. When it FINALLY started it sounded like a WRX, which at that point i thought a coil pack had gone bad, so i popped the hood and changed out packs with some extra ones that i had. Started back up, still sounded like a WRX. So i started to unclip the injector harnesses, check first and second with a noid light, and both fired fine, got to the third, and no signal. I check all my ground, switched the ECU with one that i knew was good. Still nothing. Im stumped, i have checked the injector it self and its good. Has someone had this problem before?

HELP!!!

nicku · 04-20-2008, 09:32 PM

well...have you checked with the multi-meter?

blacklable245 · 04-21-2008, 08:30 PM

yep, found a break in the wire somewhere in the harness. got it all under control

vanguard · 04-22-2008, 03:43 PM

where was the break located by? hope that doesn't happen to myself sometime thats why

04-20-2008, 03:08 PM	#1
blacklable245 Leaky Injector Join Date: Feb 2008 Location: Mars Posts: 55 Trader Rating: (0) Feedback Score: 0 reviews	SR S13 Upper Engine harness problems OK so a few weeks ago i went to start up my car. When it FINALLY started it sounded like a WRX, which at that point i thought a coil pack had gone bad, so i popped the hood and changed out packs with some extra ones that i had. Started back up, still sounded like a WRX. So i started to unclip the injector harnesses, check first and second with a noid light, and both fired fine, got to the third, and no signal. I check all my ground, switched the ECU with one that i knew was good. Still nothing. Im stumped, i have checked the injector it self and its good. Has someone had this problem before? HELP!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-20-2008, 09:32 PM	#2
nicku Zilvia Junkie Join Date: Aug 2007 Location: St. Cloud, MN Age: 37 Posts: 545 Trader Rating: (0) Feedback Score: 0 reviews	well...have you checked with the multi-meter?

04-21-2008, 08:30 PM	#3
blacklable245 Leaky Injector Join Date: Feb 2008 Location: Mars Posts: 55 Trader Rating: (0) Feedback Score: 0 reviews	yep, found a break in the wire somewhere in the harness. got it all under control

04-22-2008, 03:43 PM	#4
vanguard Join Date: Feb 2007 Location: Orange County Age: 32 Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	where was the break located by? hope that doesn't happen to myself sometime thats why